The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Accumulator type: metal
Accumulator connector type: T-connerctor
Accumulator cells type: lithium
Accumulator capacitance: 1500 mAh
Length: 125 mm
Width: 20 mm
Accumulator voltage: 11,1 V
NOTICE! Batteries are covered only by starting warranty.
Dimensions: 12,5 x 2 x 0,6 (cm x cm x cm)
Capacity: 1500 mAh
Voltage: 11,1 V
Maximum discharge power (semi fire): 30A
Maximum discharge power (auto fire): 60A
During charging LiPo battery needs to be remembered:
* Use *ONLY* a charger approved for lithium batteries.
* Charging each time using the balancer is advisable. It is preferable to use it at least every 5 cycles of loading.
* *DO NOT* leave battery without supervision when it is charging.
* *DO NOT* use broken cells.
* Avoid prolonged charging, it can cause battery damage.
* If some anomalies are spotted, you must stop charging immediately.
* To avoid the probability of electric shock first unplug the charger.
During usage LiPo battery needs to be remembered:
* *DO NOT* exceed maximum discharge power. For example battery with a 2100 mAh capacity and 15C ratio means that the maximum discharge power can take the value 15x2100 mAh = 31500 mAh = 31,5A.
* *DO NOT* discharge cells below 3 volts per cell. Under 3 volts chemical reactions start that ruin the cells capability to store a future charge.
* To avoid an excessive cells discharging is advisable to use LiPo alarm. When dangerous limit voltage level per cell will be reached LiPo alarm gives sound.
During storage LiPo battery needs to be remembered:
* Store them partially charged.
* Avoid leaving discharged battery. It can cause battery damage.
* Optimal temperature during storage is 12 Celsius degrees.
* Disconnect battery after each usage.
NOTICE! Batteries are covered only by starting warran
Completed Gearbox set ready to upgrade Come With Motor The spring 115 used in the gearbox will give you +/- 380 FPS - depend on the barrel and hop-up unit, used in your replica. Essential part for upgrading your Airsoft Electric Gun AEG To build a tight & durable gearbox Compatible with Tokyo Marui, JG, AGM, CM - M4/M16. 8mm Bearing Enhanced Gearbox...
CM.041 is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper,...
This combo pack contains a 9.6v NiMH nunchuck battery and smart charger. The nunchuck configuration battery fits most airsoft rifles, and the smart charger will quickly charge and keep the battery topped off. Both have small type tamiya plugs that are common to most airsoft rifles as well. Please note; battery & charger can looks different (not...
Tactical gloves used in many fields: airsoft, motorcycle, shooting training, outdoor sports, survival, trekking, etc. The good quality with protective functions like breathable, quick-dry, and hard-wearing features make this affordable prices product very popular. Weight: 150 g Material: spandex, plastic rubber, 1000D polyester
IPower nunchaku type Li-Po battery with a capacity of 3300mAh and a voltage of 7.4V. Its discharge current is 20C. It is equipped with a small Tamyia plug. LiPo batteries are characterised by a positive capacity-to-weight ratio and a low self-discharge rate, which benefits their use. The lithium-polymer batteries we offer are built with two (7.4V) or...
Magazine pouch can hold 5.56 style magazines (M4 / AR-15 / M16 / ACR / FAMAS / SCAR-L / TAVOR / SA80 / Galil / Type 89 / F2000 / AUG) or many other accessories. The open design provides fast reload and a additional rubber cord with a comfortable grip protects magazine from falling. Compatible with all MOLLE platforms.
DESCRIPTION: Utility rope roll made of 100% nylon. Length: 60 mtr WEIGHT (GR): 690.00 BRAND: Fosco Industries
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
Camouflage neting LW03 woodland camo 3m x 2.4m
M9A1 v.2 pistol replica by WE patterened on the most popular Italian pistol. The replica was performed with great accuracy and attention paid to details. The slide, the frame and the magazine were made of metal, whereas only grip covers, as in the real steel, were made of plastic. The covers are removable and have scrabrous non-slip texture.The...
Knight`s type short front grip designed for 22 mm RIS rail. Weight: 85 g Material: nylon Color: black Length: 95 mm
CM.041 SD6 is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal...
Metal reinforced threaded outer barrel, chamber, recoil spring guide rod, on frame safety, slide stop, hammer and trigger Full metal heavy weight professional training weapon Threaded barrel for mock silencer attachments Railed frame for light, laser attachments Heavy weight gas blow-back with superb performance Semi/Full Auto
The latest version of the popular CYMA AEP electric pistols. However, this time, despite the unchanged appearance, we have an absolute novelty inside. The replica has a MOSFET system, detachable Li-Po battery, low-resistance waring and the gearbox itself has steel ball bearings and the plastic parts are made of blue, durable polymer. Durable steel gears...
An universal multi-position stock for the AK type replicas is based on the M4 type replicas stock. The stock’s pipe is made of metal ( ZnAl ) and the tactical sling attachment point whiles as, on the other hand, the stock’s body is made of durable plastic. The stock’s foot is equipped with a porous surface thanks to which it is very stable. Dedicated to...
Accumulator type: metal
Accumulator connector type: T-connerctor
Accumulator cells type: lithium
Accumulator capacitance: 1500 mAh
Length: 125 mm
Width: 20 mm
Accumulator voltage: 11,1 V
NOTICE! Batteries are covered only by starting warranty.
![CM.605 - Black [CYMA]](https://airsoftguns.ie/19946-home_default/cm605-black-cyma-.jpg)
