The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
Madbull PWS Diablo Compensator CQB OD airsoft, Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacture
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
There are 16 products.
Active filters
A very intuitive and easy to use smartcharger by GFC Energy. Can be used to charge NiMH batteries. The charger is supplied with a cell count autodetection system.
Battery charger for NI-MH / NI-CD batteries. It has a signaling LED, the red color means charging and the green color - battery is full.
Compact self-adjustable auto-stop wall charger for NiCd/NiMH battery packs. The charger features a small Tamiya plug. NOTICE! Charges are covered only by starting warranty.
Easy to use NiMH battery charger.The charger uses 110-240V AC main power.Charges NiMH, NiCd batteries with up to 2A charge current.For 7,2V, 8,4V and 9,6V batteries. High quality, safe and durable.Tamiya Large plug. With led indicators. NOTICE! Charges are covered only by starting warranty.
This modern microprocessor charger is designed for NiMH and NiCD batteries. Suitable for batteries with the number of cells from 1 to 8.It recognizes the battery status and automatically stops the charging process when the battery is full. NOTICE! Charges are covered only by starting warranty. Tamiya Large
CAUTION! This unit suitable for Li-Po battery only. Specyfication: Charge current: 1.6 A for 3 cell, 2 A for 2 cell Balance current: 200mA for each cell Displey: 3x Bicolor LED Max. Charging Current: 3x 1600mA Size: 100mm * 60mm * 35mm
Weight: 5 g code IP ALARM
Quick and easy to use charger with balancer. After connection to power one of three LED s will flask. When charging is completed the one of three LED s will light constant. NOTICE! -Charges are covered only by starting warranty. - Can be yellow or blue (pictures)
Charger Specification: Input Voltage: 100-240V (AC)Charging Voltage: 3A maxMax Charging Rate: 25WCharger Type: LiPo/LiFe/NiMHLiPo/LiFe: 25/35NiMH: 1-85Balancing Current: 200 mAh NOTICE! Charges are covered only by starting warranty.
This combo pack contains a 9.6v NiMH nunchuck battery and smart charger. The nunchuck configuration battery fits most airsoft rifles, and the smart charger will quickly charge and keep the battery topped off. Both have small type tamiya plugs that are common to most airsoft rifles as well. Please note; battery & charger can looks different (not...
Charger LED status;Power on; GreenNormal; BrightStatus indicationCharging; RedFull Charged; GreenFailure; RED BLINK
GT POWER A606D Balance Charger w/ built-in AC power for NiCd/NiMH & Lithium Battery -- Dual Power Input Function
Redox Alpha V2 battery charger COMBO (with power supply) A new improved version of the popular Redox company’s Alpha charger. The Redox Alpha V2 is inter alia equipped with an actualized software ensuring a long and stable operation of the device. Additionally, a big radiator which discharges the heat very efficiently was mounted on the top of the...
GFC Energy LiPo smartchargerA very intuitive and easy to use smartcharger by GFC Energy, equipped with a built-in balancer. Can be used to charge both 7,4 V as well as 11,1 V LiPo batteries. The charger is supplied with an autodetection system allowing it to Automatically go into standby mode after the charging process is finished.CAUTION! The charger...
Multiprocessor Charger with a Balancer Material: Metal + Polymer Weight: 530g Measurements: 135x145x35mm Manufacturer: Electro River™ NOTICE! Charges are covered only by starting warranty.
