The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
There are 111 products.
Active filters
AGM L96 Series Low-Cap Magazine (MP002 - 22 Rounds) Injection molded polymer construction High tension steel spring ensures reliable feeding 22 round capacity Compatibility: AGM/Matrix/JG MP002 Type 96 Airsoft sniper rifles Capacity: 22 rounds Materials: Injection molded polymer Manufacturer: AGM
Speedloader for Magazines Made from semi-transparent polymer. The tool allows for rapid and accurate loading of Mid / Low / Real-cap magazines and all kinds of gas grenades or mines. The speedloader has the shape of a pistol magazine so it can be easily stored inside a magazine pouch. The set also includes an adapter that makes it easier to fill sniper...
Magazine for AGM 003 M500 shotgun--- LONG and SHORT version --- capacity: 15 Rounds --- material: plastic
Hi-Cap 350 BB M4/M16 Magazine Gun suitable - Tokyo Marui, ICS, G&P, JG & D-Boys M-Series Airsoft AEG, Capacity - 400 rounds Bullet type - 6mm plastic bullet, Constructed of FULL METAL housing that is strong to drop on the floor.
Gun suitable - Tokyo Marui, ICS, G&P, JG & D-Boys M-Series Airsoft AEG, Capacity - 400 rounds Bullet type - 6mm plastic bullet, Constructed of FULL METAL housing that is strong to drop on the floor.
- Material - metal- Magazine Capacity: 150rds- Fits almost all M4 Series rifles
This magazine is fully compatible with AK brand like CYMA, Dboys, APS which can be found on our website, sometimes it need to be adjust by a little modification. Movie instruction below: * before first usage, magazine SHOULD be oiled with silicon oil for better working, * *REMEMBER* if magazine is stored, it *MUST* be empty, * *REMEMBER* to regularly oil...
This magazine is fully compatible with AK brand like CYMA, Dboys, APS which can be found on our website, sometimes it need to be adjust by a little modification. Movie instruction below: * before first usage, magazine SHOULD be oiled with silicon oil for better working, * *REMEMBER* if magazine is stored, it *MUST* be empty, * *REMEMBER* to regularly oil...
Rules that prevent against magazine failure: * before first usage, magazine *SHOULD* be oiled with silicon oil for better working, * *REMEMBER* if magazine is stored, it *MUST* be empty, * *REMEMBER* to regularly oil the magazine with silicon oil. Weight: 175 g Magazine capacity: 200 BBs Material: steel Fits to : CM.041B, CM.041, CM.041J, M5-071,...
Made of: plastic Magazine capacity: 150 BB pellets Type : mid-cap Color: black Weight: 220g Manufacturer: CYMA
Makes reloading your standard magazines as easy as using a mechanical pencil. Just pour in your BBs, align the loading nozzle to the magazine.
Speed loader for 150 BB s is ideal for low and midcap magazines.
Color: black Material: polymer Magazine model: mid-cap Magazine capacity: 140 BBs Manufacturer: GUARDER
Material: Steel + polymer Type: Hi-Cap Capacity: 300 BBs Weight: 210 g Color: Tan
Magazine with a capacity of 30 BBs dedicated to [M1 Garand] replicas by PJ, AK. It does not fit the ICS replica. Low-cap magazines must be prepared in particular way before first usage. Steps that must be made: · during first usage, magazine MUST NOT be fully loaded with bb's, · before first usage, magazine SHOULD be oiled with silicon oil for better...
Steyr AUG A1/A2 AEG Magazine, High capacity 330 round hi-cap magazine for AUG series AEG rifles. Fits both Marui and Classic Army AUGs and many others like JG. High Quality Durable ABS plastic construction.
M1918 BAR replica magazine of S&T company, which can be found on our website. Hi-cap magazines should be prepared in particular way before first usage. Steps that must be made: before first usage, magazine SHOULD be oiled with silicon oil for better working, REMEMBER, If magazine is stored, it MUST be empty, REMEMBER to regularly oil the magazine with...
KAR98K Cartridges Stripper Weight: 5 g Material: metal Fits For: KAR98K Manufacturer: Double Bell Cartridges are not included!!!
Polymer construction of hi-cap magazine for 450 BB's is very solid, light and durable. This magazine is compatible with the M4 serie replica from brand like CYMA, APS, Dboys, JG, Arcturus, A&K, it's also compatible with AEG in Tokyo Marui standard. Hi-cap magazines should be prepared in particular way before first usage. Steps that must be made: ·...
![[BLUEBOX]140RD MID-CAP...](https://airsoftguns.ie/11242-home_default/-bluebox-140rd-mid-cap-magazine-m4m16-series-black-guarder-.jpg)
