The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
There are 23 products.
Active filters
Complet spring set for gearbox G36. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working, in this case warranty will be cancelled. Weight: 5g Material: steel
Enhanced safety lever allowing rifle safety engagement and disengagement with your index finger for right-handed operator and thumb finger for left-handed operator Weight: 30 g Material: steel Color: black
Airsoft AEG Upgrade Part Series, Gearbox Spring for Version 2. Reversal Stop Latch Spring, Tappet Spring, Cover Spring, Cutoff Lever Spring, Switch Spring
G36 Replica Pin Steel assembly pin for G36 replicas.
Precisely made, steel, CUT-OFF lever dedicated to V2 - M4 type gearboxes. The installation of this component ensures reliable operation of the gearbox. CAUTION!If you decide to personal installation gearbox parts as gears, pistons, springs, etc., you must remember that your warranty will be canceled. Weight: 5 g Material: steel Package quantity: 1 pcs.
Upgrade trigger for G3 series. The ULTIMATE® Upgrade Series trigger is made of steel to secure the best performance and durability.
WELL Trigger Assembly Suitable for airsoft Type 96 series by WELL MB-01 / SD96 / UTG Type 96 Shadow Ops / Bravo / Double Eagle / Maruzen and other compatible airsoft bolt action sniper rifles. Steel made upgrade part.
Steel Cut Off Lever for Ver.II Gearbox
The pin is designed for the body of the G36 type replicas.
M4 Bolt Catch Release, works on all M4 and M16 guns. Replaces your bolt catch.
Cut Off Lever fits all V7 / M14 gearboxes. Ideal and durable spare part, the original should be worn.
M-147 Bottom Receiver for M4/M16 Replicas A lightweight, made entirely of polymer bottom receiver for AR15 family of replicas. The set includes a fire mode selector. Purpose: M4 / M16 replicas Material: Polymer Weight: 105 g Color: Black Manufacturer: Golden Eagle
Upgrade trigger for MP5 series.
Cocking handle's spring for the M series
Complet spring set for gearbox MP5. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working, in this case warranty will be cancelled. Weight: 5 g Material: steel
When hair trigger starts to be boring, it means you are ready for the next level. With Quantum Trigger and ASTER V2, you can set sensitivity from ludicrous ‘touch’ through ‘hair’ to full movement. Features: Ultra-high resolution – even 60 trigger sensitivities for the 1st mm (0.04 in) of movementEven 470 possible sensitivity levels for whole...
SHS Airsoft AEG Upgrade Part Series -- Gearbox Spring for Version 3
The catch is ambidextrous so can be installed for either left or right handed shooters, is made of sterner materials than some stock mag catches and has a strong but purposeful feedback to the action. Making sure you have replacement parts on hand can avoid tactical blunders in the field so don't hesitate to get supply of replacement parts, especially...
Safety cover for MP5/G3 series Made from the same heat resisting compound as other electrical components to ensure minimum wear. The ULTIMATE® Upgrade Series are made of reinforced material to secure the best performance and durability.
Metal trigger pin for M4, M16 series and similar replicas. It may require shortening to fit perfectly with your replica. Weight: 2 g Material: steel Length: 29 mm
![AEG AR-15/M4 AMBIDEXTROUS MAGAZINE RELEASE - BLACK [CYMA]](https://airsoftguns.ie/18077-home_default/aeg-ar-15m4-ambidextrous-magazine-release-black-cyma-.jpg)
