The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
![AEG AR-15/M4 AMBIDEXTROUS MAGAZINE RELEASE - BLACK [CYMA]](https://airsoftguns.ie/18077-large_default/aeg-ar-15m4-ambidextrous-magazine-release-black-cyma-.jpg "AEG AR-15/M4 AMBIDEXTROUS MAGAZINE RELEASE - BLACK [CYMA]")
![AEG AR-15/M4 AMBIDEXTROUS MAGAZINE RELEASE - BLACK [CYMA]](https://airsoftguns.ie/18077-home_default/aeg-ar-15m4-ambidextrous-magazine-release-black-cyma-.jpg "AEG AR-15/M4 AMBIDEXTROUS MAGAZINE RELEASE - BLACK [CYMA]")
The catch is ambidextrous so can be installed for either left or right handed shooters, is made of sterner materials than some stock mag catches and has a strong but purposeful feedback to the action. Making sure you have replacement parts on hand can avoid tactical blunders in the field so don't hesitate to get supply of replacement parts, especially those that are frequently stressed such as the mag release.
The catch is ambidextrous so can be installed for either left or right handed shooters, is made of sterner materials than some stock mag catches and has a strong but purposeful feedback to the action. Making sure you have replacement parts on hand can avoid tactical blunders in the field so don't hesitate to get supply of replacement parts, especially those that are frequently stressed such as the mag release.
Features:
Firm and purposeful action
Compatible with most AR platform rifles
Can be installed on either left or right side of rifle
Package Includes:
CYMA - Ambidextrous Mag Release - AEG AR-15 M4
Special Instructions
Ready To Install
Spring Supplied
Ambidextrous Design
An alloy, ambidextrous replacement mag release for M4/15/16 variant rifles that is ready to install right out of the packet.
Weight: 25 g
Material: aluminum
Color: black
Please note that parts may need slightly modifying to fit some versions of M4 receivers.
Precisely made, steel, CUT-OFF lever dedicated to V2 - M4 type gearboxes. The installation of this component ensures reliable operation of the gearbox. CAUTION!If you decide to personal installation gearbox parts as gears, pistons, springs, etc., you must remember that your warranty will be canceled. Weight: 5 g Material: steel Package quantity: 1 pcs.
Product Information Gear sector chip which fits the space better between sector gear and tappet plateBasically this upgrade part can enable the tappet plate (air nozzle) to delay it's releasing time Enables reliable BB Feeding in a modified high performance AEGEven though it is such small upgrade gearbox part, it will guarantee an AEG's reliable...
Cut Off Lever fits all V7 / M14 gearboxes. Ideal and durable spare part, the original should be worn.
M-147 Bottom Receiver for M4/M16 Replicas A lightweight, made entirely of polymer bottom receiver for AR15 family of replicas. The set includes a fire mode selector. Purpose: M4 / M16 replicas Material: Polymer Weight: 105 g Color: Black Manufacturer: Golden Eagle
When hair trigger starts to be boring, it means you are ready for the next level. With Quantum Trigger and ASTER V2, you can set sensitivity from ludicrous ‘touch’ through ‘hair’ to full movement. Features: Ultra-high resolution – even 60 trigger sensitivities for the 1st mm (0.04 in) of movementEven 470 possible sensitivity levels for whole...
Upgrade trigger for MP5 series.
Complet spring set for gearbox P90. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working, in this case warranty will be cancelled. Weight: 5 g Material: steel
High-quality silver-plated, low resistance wire in transparent silicone insulation. Designed for AEG replicas, its installation is highly recommended in tuned models. Resistant to high voltage and temperature ROHS certificate
Complet spring set for gearbox MP5. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working, in this case warranty will be cancelled. Weight: 5 g Material: steel
Metal trigger pin for M4, M16 series and similar replicas. It may require shortening to fit perfectly with your replica. Weight: 2 g Material: steel Length: 29 mm
G36 Replica Pin Steel assembly pin for G36 replicas.
The pin is designed for the body of the G36 type replicas.
SHS Airsoft AEG Upgrade Part Series -- Gearbox Spring for Version 3
Enhanced safety lever allowing rifle safety engagement and disengagement with your index finger for right-handed operator and thumb finger for left-handed operator Weight: 30 g Material: steel Color: black
This is a precision machined SHS Steel Cut Off Lever for Version 3 metal gearbox AEGs. This Steel Cut Off Lever should fit in most Version 3 metal gearboxes without any modification. The steel construction makes this cut off lever twice as strong as normal zinc alloy cut off levers. The SHS Steel Cut Off Lever is extremely sturdy and precisely machined,...
Cocking handle's spring for the M series
The catch is ambidextrous so can be installed for either left or right handed shooters, is made of sterner materials than some stock mag catches and has a strong but purposeful feedback to the action. Making sure you have replacement parts on hand can avoid tactical blunders in the field so don't hesitate to get supply of replacement parts, especially those that are frequently stressed such as the mag release.
