The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Mosfets & other electronic components
There are 24 products.
Active filters
PicoAAB is the smallest, 3rd generation mosfet with Active Brake. It can work with 14.8V Li-Poly batteries. The system can be installed in every AEG. It can work with the smallest ASG replicas.
o avoid an excessive cells discharging is advisable to use LiPo alarm. When dangerous limit voltage level per cell will be reached LiPo alarm gives sound. Model Number 2s 3s 4s voltage display, l, Measuring Range 0.5-3,6v, Accuracy Class +-0.01v, built-in buzzer alarm, function low voltage checker for airsoft lipo (Lithium), cell count 2-3-4s
X-ASR is the world’s first 4th generation MOSFET protected against reverse polarity. It saves space, time and money because additional regular fuse is no longer needed. Acting as an electronic guard, X-ASR improves your AEG’s safety and durability through conformal coating and self-test with 2 LEDs. Although designed for up to M120 springs, in full auto...
Model Number 8s voltage display, Display Type Analog and Digital, Measuring Range 0.5-4.5v, Accuracy Class +-0.01v, built-in buzzer alarm, function low voltage checker for airsoft lipo (Lithium), cell count 2-8s
Battery meter works with a voltage from 3.7V to 22.2V, LiPo Battery Meter LCD 1S-6S,2s-6s, The electronic system supporting the control and diagnostics package Li-Po/Li-Fe/Li-ion.
Instalation Kit for ASTER V2™ Kit contents: M2 mounting set M2.5 mounting set Connectors set Selector plate stickers Gearbox sticker Please note that material and colour of insulation washers included in the kit may differ between different batches.
Replacement programming button needed for some GATE brand MOSFETs. 1 programming button Compatible with: MERF 3.2 and NanoHARD *Upgrading / repairing airsoft guns should only be done by skilled technicians. Airsoftguns.ie is not liable for any damages caused by the improper installation of the parts we sell.
It has 8 functions. Thanks to its special coating, it is resistant to atmospheric conditions (Military Specification MIL-V-173C). Battery protection supports: Li-Po 7.4V / 11.1V / 14.8V. You can also disable the protection and use other batteries.
Instalation Kit for TITAN V3™ Kit contents: Selector plate stickers (3pcs) Trigger stickers (6pcs) Connectors set 0,15mm trigger anti-backlash stickers (3pcs) 0,30mm trigger anti-backlash stickers (3pcs) 0,50mm trigger anti-backlash stickers (3pcs) 0,3mm washers set 0,2mm washers set 0,1mm washers set Please note that material and colour of...
Multifunctional programmable 3rd generation MOSFET. The system has 10 functions. Its latest feature is the 3-rd Burst Mode, which allows for limiting the number of shots. The system allows for lossless rate of fire adjustment. It protects Li-Ion batteries: LiPoly and LiFePO4. It has a built-in active brake and it protects contacts against damage. The...
Instalation Kit for TITAN V2™ Kit contents: Selector plate stickers Female deans-t connector Motor connectors 2.8 x 0.5 mm [0.11 x 0.02 in] 0.7mm [0.03 in] screw and washers set 0.5mm [0.02 in] screw and washers set Please note that material and colour of insulation washers included in the kit may differ between different batches.
TITAN V3™ Basic Module - the best if you long for having TITAN in two or more airsoft guns. Then you do not need the second USB-Link from the Advanced set. It includes TITAN with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require highest quality....
WARFET is GATE’s most advanced AEG Control System. It has 20 functions and almost 6 million possible configurations. The outstanding Tactical Programming Card provides you with very easy access to the WARFET Power Module settings. SUPER-EASY INSTALLATION - JUST PLUG&PLAY, NO SOLDERING REQUIRED
TITAN V2™ is an AEG Control System for V2 gearboxes which will transform your AEG into an advanced training weapon. Adjust your AEG and check the Statistics using USB-Link and GATE Control Station app for PC and Android devices. Gain a tactical advantage thanks to the extremely fast trigger response, option of adjusting trigger sensitivity to your...
TITAN V3™ Advanced Set - at once you purchase all you need to take total advantage from TITAN. It includes TITAN with ADVANCED firmware edition. The ADVANCED firmware edition offers wide variety of functions and is dedicated for those who like complex solutions. It enables access to the Statistics and TITAN World Rankings. To learn all the differences...
TITAN V2 Basic Module - the best if you long for having TITAN in two or more airsoft guns. Then you do not need the second USB-Link from the Advanced or Complete set. It includes TITAN with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require...
WARFET is GATE’s most advanced AEG Control System. It has 20 functions and almost 6 million possible configurations. The outstanding Tactical Programming Card provides you with very easy access to the WARFET Power Module settings. SUPER-EASY INSTALLATION - JUST PLUG&PLAY, NO SOLDERING REQUIRED
TITAN V2™ is an AEG Control System for V2 gearboxes which will transform your AEG into an advanced training weapon. Adjust your AEG and check the Statistics using USB-Link and GATE Control Station app for PC and Android devices. Gain a tactical advantage thanks to the extremely fast trigger response, option of adjusting trigger sensitivity to your...
TITAN V2 Basic Module - the best if you long for having TITAN in two or more airsoft guns. Then you do not need the second USB-Link from the Advanced or Complete set. It includes TITAN with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require...
NanoAAB is the latest, 3rd generation MOSFET with active brake. The application of the most up-to-date transistors and microprocessor enabled us to create the smallest and the most reliable MOSFET with active brake in the market. Thanks to its special coating, it is resistant to atmospheric conditions.
