The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Airsoft is a competitive team sport in which participants eliminate opponents by shooting each other with spherical plastic pellets launched via replica weapons called airsoft guns. Airsoft is commonly compared to paintball, which is a recreational shooting sport similar in concept but with some key differences.
Subcategories
There are 241 products.
Active filters
A semi-automatic gas operated version of the classic M92F. Used by many law enforcement agencies and military forces around the world, and has appeared in countless action movies. This popular replica holds 21 BB’s in the magazine and has fixed Hop-up. Please note!!! Gun can came without markings.
The GG-105 Airsoft Pistol Replica, also known as the M9, is a replica of the iconic pistol with its origins in real firearms. The M9 was introduced into the United States military arsenal in 1985 and has since become one of the most recognizable and highly regarded firearms worldwide. Its fully metal construction and reliability have made the M9 a...
Taiwanese replica of STTI company is made of ABS. Metal are trigger and hammer. The gun has a standard for this class performance and is designed for people who appreciate reliability and economical gas consumption. Set includes: * USP replica * Green Gas magazine
Discover the Power of the WE23-S Minigun - a revolutionary five-barrel Gatling-style replica. It delivers dynamic action and provides team support. Compact design, durable construction, versatile features, and an astonishing firing rate of up to 36 rounds per second - it's a new level of ASG gameplay. Get ready for an exceptional experience! Please...
This is the newest model from WE-TECH. This pistol is well known from movies, games and is also used by many of forces. The slide is made from high-quality aluminum and the lower body from a durable polymer. On attention deserve the pistol grip that has changeable pads for better handling. The grip in combination with very good chosen weight gives his...
S&T LEE ENFIELD SMLE NO. 1 MK III AIRSOFT RIFLE IN REAL WOOD This S&T reproduction is a fantastic replica of the famous SMLE, with a real wood stock, Iron Cylinder and almost full metal construction this rifle comes in at 3.5kg, that is less than 500grams lighter than the real rifle. S&T have decided to go with the slightly later square...
KP-05 [KJW] (HI-CAPA) is made from high quality aluminum. The grip in combination with very good chosen weight gives his operator feeling like holding a real gun. Replica can be powered by green gas or CO2, it`s depend which magazine type we use.
SAI BLU STANDARD electric airsoft pistol made by CYMA under license from Salient Arms International. SAI is an American producer of weapons for the military, law enforcement, and sports shooters. The airsoft pistol fires Single and Full Auto. The change of fire mode is possible with a switch located on the slide. BLU has a licensed frame and a slide with...
The latest version of the popular CYMA AEP electric pistols. However, this time, despite the unchanged appearance, we have an absolute novelty inside. The replica has a MOSFET system, detachable Li-Po battery, low-resistance waring and the gearbox itself has steel ball bearings and the plastic parts are made of blue, durable polymer. Durable steel gears...
The ST 200 was purposefully crafted to be an unparalleled force on the battlefield, excelling at extended ranges due to a new caliber .408. Its design revolves around empowering modern warfighters with the capability to unleash devastatingly accurate firepower over long distances. The ST 200's exceptional performance has catapulted it to the heights of...
The latest version of the popular CYMA AEP electric pistols. The replica has a MOSFET system (battery and switch protection), detachable Li-Po battery, upgraded gearbox with steel bearings and low-resistance wiring. Durable steel gears ensure trouble-free operation of the mechanism. Thanks to these upgrades we got an extremely durable pistol with a quick...
Introducing a sturdy recreation of the Submachine Gun MK7 by S&T, a formidable counterpart to the renowned Sten, further establishing its status as an iconic weapon in the British armed forces. Crafted from stamped steel, this firearm is a specialized model within the Sterling SMG family. The Sterling Mk.7 is essentially a modified version of the...
042 is a replica of a German machine gun (Maschinengewehr MG42). The whole structure of metal (flash hider, barrel, barrel change flap, weapon receiver, grip, trigger, receiver cover, front sight and rear sight) mainly ZnAl. From steel is a bipod, barrel change latch, cocking slide, cocking handle, feed tray with cartridge stop and rear anti-aircraft...
An AEG replica of an American WWII light machine gun. The mechanism is a gearbox with a quick spring change system, steel gears mounted on 8mm ball bearings. The stock and handguard are made of high-quality real wood, and the elements such as barrel, bipod, receiver, carry handle, trigger guard, magazine release catch and sights are made of metal alloys....
This is a custom weapon based on the Colt 2011 STI design, that is a development of the classic Colt 1911 with a double stack magazine. These types of pistols are commonly called Hi-Capa. Stippled Grip Light Enhancing Sight Custom Compensator ~320fps 1020g
In 1930, there was an advanced type Mosin Nagant was developed and named M1891/30 Rifle. The Mosin Nagant was the most popular rifle in the world and used by Soviet Army during WWII but stopped production in 1948 since the design was getting old. However it has been used in some countries like Turkey, former East Germany and even showed up in Korean War...
CM.136 is an airsoft replica of the latest Russian pistol, adopted as a standard sidearm for military and law enforcement agencies, alongside the Makarov PM, GSh-18 and SPS The CM.136 is produced by CYMA, a famous Chinese manufacturer, which has proven itself in the production of AEP pistols like their famous CM.127S or the CM.030. This time, Cyma offers...
A replica of the US infantry primary rifle from World War II until the late 1950s, when the M14 and later the M16 rifle were introduced. Electric mechanism with a v7 gearbox compatible with Marui/CYMA parts, steel gears mounted on 6mm bearings and a quick spring change system. The buttstock is made of quality wood, and the elements such as barrel, gas...
Introducing the latest innovation in Airsoft weaponry, inspired by iconic firearms seen in movies and video games the APS MK-2 Street Sweeper Revolver Shotgun. Crafted with a durable and lightweight polymer body combined with a heavy-duty metal rotating magazine and barrel, this shotgun not only offers realistic weight but also ensures durability during...
A long-awaited replica of ARMY ARMAMENT's 1911 Darkstorm already on sale. The aim of ARMY was to launch a product for customers who are looking for a pistol with reliable combat characteristics, long range, fly straight and hit hard, but also a beautiful appearance with made of accuracy, precision finish and durability of construction. Please note!!! Gun...
![PX001 PISTOL REPLICA [WE]...](https://airsoftguns.ie/19322-home_default/px001-pistol-replica-we-green-gas.jpg)
![M1 GARAND RIFLE REPLICA [PJ]](https://airsoftguns.ie/18239-home_default/m1-garand-rifle-replica-pj-.jpg)
