The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
JG067MG submachine gun replica
The replica"s components are made from plastics and metal. The stock rail, front iron sights, fire mode selector, magazine release and the trigger are made of metal. Magazine box and two sling mounting points are made of steel. Adjustable length of the stock allows the user to adapt the replica to his or hers physique and preferences. Small size of the replica makes it perfect for operations in urban areas and in small, confined spaces. The battery is located inside the integrated suppressor.
JG067MG submachine gun replica
The replica"s components are made from plastics and metal. The stock rail, front iron sights, fire mode selector, magazine release and the trigger are made of metal. Magazine box and two sling mounting points are made of steel. Adjustable length of the stock allows the user to adapt the replica to his or hers physique and preferences. Small size of the replica makes it perfect for operations in urban areas and in small, confined spaces. The battery is located inside the integrated suppressor.
The latest version of the replica features an innovative muzzle velocity adjustment system. The gearbox is equipped with a special type of the spring guide which length, and thus the replica"s power, can be adjusted with a hex screw. The adjustment range is c.300–360FPS. Access to the adjustment screw is very easy – just remove the stock and place a hex key in the visible opening of the body and gearbox"s back wall.
The replica includes a hi-cap type magazine holding 250 pellets.
Velocity [FPS]:~328
Propulsion / Powered by: Electric
Gearbox version: v2 Gearbox
Type of fire: Single, auto
Lenght [mm]: 640-770
Inner barrel length [mm]: 230
Weight [g]: 1900
Battery Voltage [V]: 8,4
Battery Capacity [mAh]: 1100
Battery included: Ni-MH
Magazine type: Hi-Cap magazine
Magazine capacity [pcs]: 250
Hop-Up: Yes, adjustable
Blow Back: No
Made of: Metal + plastic
The set includes:
– Replica
– Magazine
– Battery
– Battery charger
– Ramrod
– A test pack of pellets
– Manual
A replica of the legendary American sub-machinegun, the so called grease gun which is made by the Snow Wolf company. It is a great opportunity for those who love military items from the period of the II World War. The replica’s body was made of steel when as the barrel and other minor elements are made of an alloy of zinc and aluminum. The Grease Gun is...
CM.041 is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper,...
CM.041B is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper,...
DESCRIPTION Thoroughly and carefully made replica of P90. The body is made from the polymer. The replica has three metal Picatinny rail allowing mounting of tactical accessories (optics, flashlights, laser sights). The mechanism is a dedicated metal gearbox v.6 with steel-sliding bearings 6mm, cylinder type 1, reinforced piston with aluminum sleeve,...
AGM MP007C is an airsoft replica of the iconic German submachine gun, the MP40, from the World War II era. Produced by AGM, this replica is meticulously crafted, staying true to the original, including the foldable metal stock. All the metal components of the original firearm have been precisely reproduced in this replica. PLEASE NOTE!!! Battery and...
The JG-0451 airsoft AEG gun is modelled on the famous Czechoslovakian made V61 Skorpion SMG or sub machine gun. The very solidly made replica has a mechanism specially constructed for this model inside that allows receiving 260 fps. The replica's parameters make it an ideal submachine gun for conducting safe games in CQB. Elements such as the stock,...
CM.051 is a replica of a submachine gun made famous in the days of Prohibition-era in the United States as a weapon used by both gangsters and police, and during World War II by American soldiers. The buttstock, pistol grip, and foregrip are stylized on wood made of plastic. Magazine, receiver, frame group, bolt, bolt handle, safety, trigger, magazine...
JG069MG submachine gun replica The replica's components are made from plastics and metal. The stock rail, front iron sights, fire mode selector, magazine release and the trigger are made of metal. Magazine box and two sling mounting points are made of steel. Adjustable length of the stock allows the user to adapt the replica to his or hers physique and...
It's a replica of the newest series of Arcturus LITE, in which the upper and lower receivers were made of durable nylon. Thanks to the nylon body, the weight and the price of the replica were reduced. Using the nylon, the replica did not lose its strength, because the socket of the receiver extension tube and a barrel socket with a thread for the...
Set included: * replica with silencer (1 month warranty) * hi-cap magazine * battery 7,2V, 500 mAh with starting warranty * charger with starting warranty
CM.041 SD6 is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal...
DESCRIPTION A Rifle of the well-known Belgian PDW FN Herstal P90 submachine gun produced in Fabrique Nationale in the Belgian city of Liege which is famous for the production of weapons and great chocolates. Due to the compact design, this gun is used by security guards, drivers, and vehicle crews, as well as by special forces and anti-terrorist groups in...
Introducing a sturdy recreation of the Submachine Gun MK7 by S&T, a formidable counterpart to the renowned Sten, further establishing its status as an iconic weapon in the British armed forces. Crafted from stamped steel, this firearm is a specialized model within the Sterling SMG family. The Sterling Mk.7 is essentially a modified version of the...
JG070 is replica of most popular SMG's on world - MP5. Original firearm is commonly used by special forces like: SAS, GROM, Navy SEALs, GSG9 and many more.
The Sten 058 MK II SMG by [AGM] resurrects a significant chapter of world history. The Sten, a submachine gun utilized by the British Army during World War II, is notable for its straightforward yet sturdy design. This firearm was developed to rapidly replenish the British Army's substantial equipment losses following the evacuation from Dunkirk, employ...
CM.033 is a replica of submachine gun made famous in the days of Prohibition era in the United States as a weapon used by both gangsters and police, and during World War II by American soldiers. Butt stock, rear grip, and fore grip is stylized on wood made of plastic. Magazine, frame group, bolt, barrel and receiver are made of metal.
JG067MG submachine gun replica
The replica"s components are made from plastics and metal. The stock rail, front iron sights, fire mode selector, magazine release and the trigger are made of metal. Magazine box and two sling mounting points are made of steel. Adjustable length of the stock allows the user to adapt the replica to his or hers physique and preferences. Small size of the replica makes it perfect for operations in urban areas and in small, confined spaces. The battery is located inside the integrated suppressor.
![P90 CM.060B SMG [CYMA]](https://airsoftguns.ie/14876-home_default/p90-cm060b-smg-cyma-.jpg)
![MAC 11 JG0452 [WORKS J.G.]...](https://airsoftguns.ie/10692-home_default/mac-11-jg0452-works-jg-smg-airsoft.jpg)
