The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Airsoft is a competitive team sport in which participants eliminate opponents by shooting each other with spherical plastic pellets launched via replica weapons called airsoft guns. Airsoft is commonly compared to paintball, which is a recreational shooting sport similar in concept but with some key differences.
Subcategories
There are 236 products.
Active filters
Thunder B can be attached to tactical vest or jacket. Its color and shape are very similar to a real grenade used by military force. Its handling, operation and function are also similar to the original one. The more realistic of the bomb, the more fun you will have. Since thunder B does not contain any gun powders, which means you don't have to worry...
Hakkotsu Tactical Simulation Training equipment Series, High Density Nylon Construction, For Thunder B TB-S-03 Sound (Flash Bang) Grenade, Design For Replace The Original Parts This is a colorful flash bang cover which help you to locate the Thunder B after throw. NOTE! Package Included 1 pair of Flash Bang Cover (Top and Bottom).
Weight: 40 g Material: aluminum, steel Color: black
Charger for low-capacity batteries for AEP pistol replicas. After the battery is charged, the landing process will automatically stop. Thus, the battery is protected against damage. Remember that it is not allowed to charge the battery placed in the replica! The battery fits the charger [IP-MICRO]
Weight: 100 g Color: black Length: 165 mm Material: metal Magazine model: low-cap Magazine capacity: 30 BBs Manufacturer: CYMA
Weight: 120 g Magazine model: low-cap Magazine material: metal Magazine capacity: 30 BBs Manufacturer: CYMA
Weight: 120 g Material: 1000D polyester Color: olive Please Note!!! Shells are not included!!!
Suitable for CM121 Desert Eagle Series AEP AEG Pistol. Suitable for 6mm Plastic Bullet BB. Weight - Approx 130g
Enlarged magazine for the Cyma 132S/126 electric pistol, holds 80 bb's.
Enlarged magazine for the Cyma 132S/126 electric pistol, holds 80 bb's.
Weight: 100 g Color: black Material: metal Magazine model: low-cap Manufacturer: CYMA
The long-awaited Li-Po battery dedicated to electric pistols equipped with a small Deans connector. For charging, use only chargers dedicated for li-po batteries. The battery is connected to the charger through the balancer port. Suitable for replicas such as CM.132S, CM.121S, CM.123S, CM125S and similar equipped with a small Deans connector. Does not...
Weight: 625 g Material: nylon Color: black Length: 320 mm Width: 250 mm Height: 65 mm
Shells For Spring Powered Shotgun, 6 PC, 30rd's per shell Please note!!! THE SHELLS CAN BE ONLY ONE COLOR - RED
A small 7.2V 500mAh. battery for electric airsoft handguns like G18C, CZ99 and STI Classic, also it fit CYMA electric pistols. CM030, CM121, CM122, CM123, CM125, CM126 NOTICE! Batteries are covered only by starting warranty.
The long-awaited Li-Po battery dedicated to electric pistols. Its significantly improves the response to trigger pull -replica comes alive! The battery fits without any modifications in the replica, its charging is detached using chargers for Li-Po batteries. For charging, use only chargers dedicated for li-po batteries. The battery is connected to the...
NOTICE! - Batteries are covered only by starting warranty. - Guns not included.
The P361 pistol replica was made of metal and plastic. It's the models of the pistol that set out for the first adventures in the ASG world. A replica of good quality gauges in terms of price, reliability and accuracy of the presented model.
Green Gas Adapter for CO2 Replicas A Green Gas adapter made from high quality aluminum with the use of CNC technology, which allows for powering a CO2 replica with Green Gas. Compatible with 12g standard. Attention: Some replicas designed to use CO2 may not be compatible with Green Gas due to implementation of components requiring a gas of higher pressure!
A replica of DL 60 SOCOM pistol, manufactured by Danish company ASG. Comes with a silencer 195 mm long. It is equipped with safety lock and fixed HopUp system, which significantly improves the accuracy and range of replica. Replica is made of high quality ABS composite. Magazine holds 27 rounds. Under the barrel is placed Picatinny rail for mounting...
![AEP BATTERY CHARGER [CYMA]](https://airsoftguns.ie/19561-home_default/aep-battery-charger-cyma-.jpg)
![CM.125 MAGAZINE 30RD [CYMA]](https://airsoftguns.ie/18005-home_default/cm125-magazine-30rd-cyma-.jpg)
![9" nylon gun case - BLACK [SRC]](https://airsoftguns.ie/16250-home_default/9-nylon-gun-case-black-src-.jpg)
