Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
The M82 Barrett is a semi-automatic anti-materiel rifle used by US Army since 1989 and used by many units and army around the world. It is also called M107 in US army, or «Light Fifty for it .50BMG caliber. The M82 has two variant, the original M82A1 / M82A3 and M82A2, the bullpup version of the M82 Barret Family.
A .50 cal Under licence;
The airsoft AEG version is a faithful replica of the legendary rifle. Which has been manufactured by Snow Wolf under Barret licence in cooperation with 6mm Pro Shop. The airsoft rifle has all original engraved markings.
Please Note!!!
Estimated delivery time is 10-14 working days!
The M82 Barrett is a semi-automatic anti-materiel rifle used by US Army since 1989 and used by many units and army around the world. It is also called M107 in US army, or «Light Fifty for it .50BMG caliber. The M82 has two variant, the original M82A1 / M82A3 and M82A2, the bullpup version of the M82 Barret Family.
A .50 cal Under licence;
The airsoft AEG version is a faithful replica of the legendary rifle. Which has been manufactured by Snow Wolf under Barret licence in cooperation with 6mm Pro Shop. The airsoft rifle has all original engraved markings.
A solid construction;
A such iconic rifle need to have a solid construction, that why this airsoft rifle is made almost entirely of metal (including steel), the only elements made of high-quality plastic are the pistol grip. The body, RIS rail, barrel cover, bi-pod, magazine, and transport handle are made of metal, while the butt pad is made of rubber to increase the comfort of use.
On the top of the rifle, you will find a Picatinny rail 22 mm which gives the option to mount different [optic] sight. With the airsoft rifle, you will find a carrying handle with a RIS mount, useful when carrying this massive airsoft rifle.
A internal gearbox reinforced;
Inside the airsoft rifle is installed a V2 standard Gearbox, is equipped with a quick-change spring system, the steel gear is mounted on the slick bearing which can resist to high loads.
A major advantage of this gearbox is compatibility with the majority of parts that can be found on the airsoft market. Allowing any configuration and a wide range of tuning possibilities
Hop up: adjustable
Weight: 6700 g
Magazine material: steel
Bearings type: steel sliding
Gearbox version: v.2
Bearings diameter: 7 mm
Magazine model: hi-cap
Material: aluminum, rubber, polymer, steel
Color: black
Fire type: auto, single
Serial number: YES
Length mm: 1440
Inner barrel length mm: 670
Muzzle energy J: ~1
Magazine capacity BBs: 200
Muzzle velocity fps: ~328
Inner barrel diameter mm: 6.04
Gun Model: M82
The set includes :
• The Barrett M82 airsoft rifle.
• Hi-cap Magazine
Every replica passes initial check-up up. It's being checked and overshot on XCORTECH X3200 chronograph.
AGM APS2 L96 Airsoft Sniper is a bolt action, single fire sniper rifle. It outputs an impressive 320FPS right out of the box! The rails on the top of the gun allow for aftermarket upgrades such as a scope. Scope and bipod NOT INCLUDED. Please Choice separately from list below
The sniper rifle replica is made of metal and high quality plastic. The metal made elements are as follows: the minor elements and also the barrel, the bolt carrier, the cocking handle, the RIS rail and the trigger. Scope and bipod NOT INCLUDED. Please Choice separately from list below
1/1 Scale Super Sophisticated Spring Powered Karabiner 98 Kruz Rifle, Full Metal + Wood Stock
S&T LEE ENFIELD SMLE NO. 1 MK III AIRSOFT RIFLE IN REAL WOOD This S&T reproduction is a fantastic replica of the famous SMLE, with a real wood stock, Iron Cylinder and almost full metal construction this rifle comes in at 3.5kg, that is less than 500grams lighter than the real rifle. S&T have decided to go with the slightly later square...
In 1930, there was an advanced type Mosin Nagant was developed and named M1891/30 Rifle. The Mosin Nagant was the most popular rifle in the world and used by Soviet Army during WWII but stopped production in 1948 since the design was getting old. However it has been used in some countries like Turkey, former East Germany and even showed up in Korean War...
WELL L96 Bolt Action Spring Rifle, Replica of Maruzen APS Type 96 Bolt Action Sniper Rifle, Full Metal Bolt System & Solid cocking motion sound, Soft Rubber Stock made it to be ultimate rifle for comfort & accuracy. Scope and bipod NOT INCLUDED. Please Choice separately from list below
WELL L96 Bolt Action Spring Rifle, Replica of Maruzen APS Type 96 Bolt Action Sniper Rifle, Full Metal Bolt System & Solid cocking motion sound, Soft Rubber Stock made it to be ultimate rifle for comfort & accuracy . Scope and bipod NOT INCLUDED. Please Choice separately from list below
WELL VSR-10 Bolt Action Spring airsoft Rifle - Wood Texture ABS Body, Muzzle Power reach ~328FPS, Magazine 25+1 rd. Scope and bipod NOT INCLUDED. Please Choice separately from list below
The Kar98k rifle replica is made of polymer and metal. The barrel, slide, sights and sling swivels are made of metal. A stock is made of polymer (wood imitation). The manufacturer tried to reproduce the principle of shooting from the firearm counterpart as best as possible. The replica shoots 6mm BBs which are placed in special shells. Shells with BBs are...
1/1 Scale Super Sophisticated Spring Powered Karabiner 98 Kruz Rifle, Full Metal + Wood Stock + Scope Bell KAR 98k Air cocking Shell-Ejecting Sniper ( Wood ver./ W Scope Set ) ( DBOY ) - Iconic bolt action rifle used by Nazi Germany during WWII - Air cocking system with shell eject function during bolt action. - Full travel bolt assembly
The ST 200 was purposefully crafted to be an unparalleled force on the battlefield, excelling at extended ranges due to a new caliber .408. Its design revolves around empowering modern warfighters with the capability to unleash devastatingly accurate firepower over long distances. The ST 200's exceptional performance has catapulted it to the heights of...
Black Texture ABS Body and Full Metal Receiver With Barrel, Muzzle Power reach ~320FPS Velocity (Air Cocking), Full Metal Magazine Accommodate 25+1 Rounds of 6mm Plastic Pellet. Scope and bipod NOT INCLUDED. Please Choice separately from list below
Spring-powered replica of a American WWII bolt-action rifle with a trigger assembly, barrel and hop-up rubber in the VSR10 system, and a steel cylinder (22x201mm). The stock is made of high-quality real wood, and the elements such as barrel, bolt, receiver, sights, magazine housing, trigger and trigger guard are made of steel and aluminum. Set includes a...
Black Texture ABS Body and Full Metal Receiver With Barrel. Power reach ~328FPS Velocity (Air Cocking), Magazine Accommodate 25+1 Rounds of 6mm Plastic Pellet, Airsoft WELL VSR-10 MB03 Bolt Action Spring Rifle Scope and bipod NOT INCLUDED. Please Choice separately from list below
AGM APS2 L96 Airsoft Sniper is a bolt action, single fire sniper rifle. It outputs an impressive 320FPS right out of the box! The rails on the top of the gun allow for aftermarket upgrades such as a scope. Scope and bipod NOT INCLUDED. Please Choice separately from list below
A replica of the US infantry primary rifle from World War II until the late 1950s, when the M14 and later the M16 rifle were introduced. Electric mechanism with a v7 gearbox compatible with Marui/CYMA parts, steel gears mounted on 6mm bearings and a quick spring change system. The buttstock is made of quality wood, and the elements such as barrel, gas...