CO2 12G CAPSULE

Reference: MOS-35-000766, 14798, CO2-12M

CO2 12G CAPSULE

Standard CO2 12g capsule for CO2 gas replika. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
€1.00
More CO2 12G CAPSULE
In stock
WE 2X High Performance Premium Green Gas 800ml

Reference: WET-35-026471

WE 2X High Performance Premium Green Gas 800ml

Green Gas WE 2X High Performance Premium is a high quality gas for powering airsoft guns. It ensures smooth and efficient mechanisms, as well as high repeatability and stability of shots. It is efficient and can be used for a variety of green gas-powered replicas: pistols, carbines or grenades. Green Gas WE is appreciated by players from all over the...
€15.95
More WE 2X High Performance Premium Green Gas 800ml
In stock
Suitable for precision barrels, BIODEGRADABLE  AIRSOFT BB

Reference: ROC-16-011618

0,23G BIO PRECISION BB Green - 4350RD

Diameter 5.95mm +/- 0.01mm. Highest Quality which affects effective accuracy, good shot grouping, long range and minimal jamming. Suitable for 6.01mm precision barrels Rockets Professional BIO 0,23g BBs. Long-awaited, high quality, precision Rockets BBs. Thanks to a special manufacturing process, Rockets are characteristic for their very tight cone of...
€12.95
More 0,23G BIO PRECISION BB Green - 4350RD
In stock
All best sellers
  • Banner

    Banner left 1
Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine
  • Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine
  • Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine
  • Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine
  • Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine
  • Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine
  • Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine
  • Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine
  • Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine
  • Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine
  • Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine

Arcturus LWT MK-II CQB 10" AEG SPORT SE™ Half-Tan Carbine

ACR-01-044930

Arcturus LWT MK-II CQB 10" 

The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass.

The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device, manipulators (bolt-catch, selector, magazine catch), reloading levers were made of aluminium . PA66 nylon is used for the barrel with a 10-inch-long M-LOK handguard. On the handguard we additionally find RIS rails. The RIS rails are also nylon: both on the handguard and on the barrel. There is an ergonomic pistol grip, which has a rough surface, a magazine, an ergonomic, adjustable buttstock, which accommodates the battery and folding sights.

€209.95
Tax included
Quantity

Description

Arcturus LWT MK-II CQB 10" AEG SPORT SE™ airsoft Carbine

The airsoft carbine from Arcturus model LWTMK-II CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass.

The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, the dummy slide were made from steel . At the same time, the manipulators (bolt-catch, selector, magazine catch), reloading levers and the stock guide were made from aluminium .

PA66 nylon is used for the 8.5" long M-LOK/RIS compatible barrel and handguard. The RIS rails are also nylon: both on the handguard and on the body. There is an ergonomic pistol grip, which has a rough surface, a magazine, an ergonomic, adjustable buttstock that accommodates the battery and folding sights.

The replica is lightweight, well-fitted and balanced, its interior provides very good performance in its factory configuration and a good base for tuning.

Inside the replica we find, among others:

- CNC steel cylinder

- Gearbox V2 with quick-change spring system

- Polymer spring guide

- Reinforced Gearbox front

- Polymer nozzle

- 23T motor (ferrite)

- 18:1 gears

- Hop-up rotary unit

- SE optical control system

The model belongs to the SE or Standard Enhanced series, which means that the replica has been equipped with a programmable optical control unit.

Functions of the SE ETU optical system:

- Pre-Cocking (2 stages)

- Active Break (2 stages)

- Progressive trigger

- Programmable fire modes

- Binary trigger with Ramping

- Low Battery Protection

- Electronic fuse

Battery included; No

Blow Back; No

Colour; Black/Tan

Product length [cm]; 85.50

Product weight [g]; 2150

Power supply; Electric

Muzzle velocity [FPS]; ~328

Fire mode; Full-auto

Adjusted burst; Semi-auto

Gearbox version; Gearbox v2

Package include:

Cleaning rod

Hi-Cap Magazine

Patch

Replica

Allen key

Iron sights

Small Tamyia - Deans adapter

Vertical Grip

Package exclude:

The set does not include the battery nor charger

Product Details
ACR-01-044930
4 other products in the same category:
Out-of-Stock AR-15 CM.008 FULL METAL [CYMA] assault rifle replica AR-15 CM.008 FULL METAL [CYMA] assault rifle replica

Reference: FB3351-1

Brand: CYMA

AR-15 CM.008 FULL METAL [CYMA] assault rifle replica

The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer. The make is fully compatible with the Tokyo Marui standard, the replicas are equipped with metal hop-up chamber and the...
€269.95
More AR-15 CM.008 FULL METAL [CYMA] assault rifle replica
Out-of-Stock
HK416 FULL METAL SHORT BELL 811 HK416 FULL METAL SHORT BELL 811

Reference: 811, DBY-01-028079

HK416 FULL METAL SHORT BELL 811

Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
€269.95
More HK416 FULL METAL SHORT BELL 811
In stock
CYMA CM.622 M4 handguard UX Airsoft Rifle CYMA CM.622 M4 handguard UX Airsoft Rifle

Reference: FB4024

CYMA CM.622 M4 handguard UX MOSFET EDITION

Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the...
€199.95
More CYMA CM.622 M4 handguard UX MOSFET EDITION
In stock
STEN MK.II, Airsoft AEG Rifle STEN MK.II, Airsoft AEG Rifle

Reference: AGMSTENMKII, AGM-01-000827

STEN MK.II, Airsoft AEG Rifle

The Sten 058 MK II SMG by [AGM] resurrects a significant chapter of world history. The Sten, a submachine gun utilized by the British Army during World War II, is notable for its straightforward yet sturdy design. This firearm was developed to rapidly replenish the British Army's substantial equipment losses following the evacuation from Dunkirk, employ...
€239.95
More STEN MK.II, Airsoft AEG Rifle
In stock

Follow us on Facebook