CYMA CM.622 M4 handguard UX MOSFET EDITION

This Airsoft Electric Gun is based on the traditional AR platform and offers users and incredible amount of features and quality straight out of the box over other Airsoft Guns, especially for the price. The exterior is mainly crafted from Polymer, with a tough and high-density Nylon Fibre Handguard, Receiver, Pistol Grip and Stock which all feel great to the touch and will withstand a fair amount of abuse. The Outer Barrel Assembly and Buffer Tube (as well as Fire Controls) are made from Alloy to give the rifle a strong core to ensure there is no wobble.

The front of the AEG has a 14mm CCW Thread underneath the Bird Cage Flash Hider which will allow you to install Supressors, Tracer Units, Muzzle Brakes and more. Simply unscrew the grub screw from the Flash Hider and twist to remove. The Handguard is a 20mm RIS design which means it will be compatible with 90% of Airsoft Accessories, allowing you to attach Grips, Lasers, Lights etc. The Top Rail runs the full length of the Handguard and down to the back of the Receiver, which is ready for Sights and Scopes to attach, and is also where you will find a set of Flip Up Ironsights which can be removed if you don't want them. At the rear of the Receiver you will notice an Ambidextrous Sling Plate, which means that you can attach a Sling from either side of the Gun, depending on whether you're Left or Right Handed. The stock is a Sliding Crane Stock design and houses your Battery, connected to a Mini Tamiya Connector. To access the Stock, simply squeeze the tabs on the Butt Plate and pull it away as well as the blanking plate underneath. 

We recommend either a maximum 9.6v 1600mAH NiMH Crane Battery or 7.4v <2000mAH Crane LiPO Battery for the best fit.

Please note!!!

LiPO Battery 11.1v - out of warranty (on your one risk)!

Deep inside the CYMA CM.622 there is a MOSFET to protect the Electrical Components of the AEG, as well as a Microswitch Trigger which is very pleasant to use. The benefit of a Microswitch Trigger is much faster response from the gun, as well as removing the chance of burnt-out Trigger Contacts from a traditional design. The gun has a Quick Change Spring system which lets you change the Main Spring in seconds, once the Gearbox has been removed from the Receiver. This is an amazing feature for Airsofters who play at lots of different sites with varying Power Limit rules, and need to quickly change the FPS of their gun. Please note that technical skills are still required to remove the Gearbox from the gun. The gun has an Adjustable HOP Unit which will apply backspin to your BBs, and potentially increase effective range when combined with a Heavyweight BB (0.25g+) and the correct settings on the Adjustment Wheel. To make changes to the HOP, pull back the charging handle and look inside the dust cover to access the Adjustment Wheel.

Battery and Charger not included!!!

Features

Microswitch Trigger

~320 FPS

MOSFET Installed

Quick Change Spring

Tough Nylon Fibre Polymer

Full Metal Gearbox

Alloy Outer Barrel Assembly

Alloy Buffer Tube

Rear Wired / deans connection (T-connerctor)

14mm CCW Thread

300rnd High Cap Magazine

Flip-Up Ironsights

Perfect Starter Gun

Excellent Value for Money

Sliding Crane Stock

Fast Trigger Response

20mm Railed Handguard

20mm Receiver Rail

Ambidextrous Sling Plate

Adjustable HOP

Gear Style HOP Adjust

Package Includes

CYMA CM.622 M4 Long UX Airsoft Rifle

300rnd High Capacity Magazine