The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
The CM048 replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high quality plastic as the front grip was made of plywood which presents itself great and lies comfortably in the operators hands.
The replica does not have a charger and a battery in the set.
The CM048M replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high quality plastic as the front grip was made of plywood which presents itself great and lies comfortably in the operators hands.
The replica was equipped with a metal hop-up chamber. A standard durable V.3 gearbox was used in this replica and this is the standard gearbox for the AK replicas. However, in this case, it was additionally modified and equipped with a reinforced casing. The next reinforced elements are the 7mm steel slide bearings, the reinforced steel thread-wheels and the directional piston head that increases the efficiency of the whole mechanism.
Weight: 2850 g
Magazine model: steel
Bearings type: steel sliding
Bearings diameter: 7 mm
Muzzle velocity: ~328 fps
Accumulator connector type: small Tamiya
Diameter of Internal barrel: 6,08 mm
Magazine capacity: 525 BBs
Material: wood, metal
Color: black
Length: 910 mm
Muzzle energy: ~1J
Length of internal barrel: 455 mm
Set Included:
* replica
* magazine hi-cap 525rd
The replica does not have a charger and a battery in the set.
Warrnig;
Adjustment rear sight only like in picture (green colour).
We don`t response for damages caused for bad adjustment (red colour)
Every replica pass initial check up.
It`s being checked and overshooted on XCORTECH X3200 chronograph.
FAMAS F1 Assault Rifle Replica A replica made mainly from elastic and durable nylon polymer. Elements such as the barrel, bipod, trigger, screws, pins and internal elements were made from metal. The set includes a metal Hi-Cap magazine with a capacity of up to 300 BBs, which allows for longer firing.
1/1 Scale Super Sophisticated Spring Powered Karabiner 98 Kruz Rifle, Full Metal + Wood Stock
The 1:1 scale replica of the German P38 pistol, manufactured by the Taiwanese company WE-Tech, is a faithful copy of the weapon used during **World War II**. The P38, replacing the Luger P08, was in service until the end of the Cold War. It features a solid **metal construction** with a functional **blowback system**, enhancing the realism of the shots....
042 is a replica of a German machine gun (Maschinengewehr MG42). The whole structure of metal (flash hider, barrel, barrel change flap, weapon receiver, grip, trigger, receiver cover, front sight and rear sight) mainly ZnAl. From steel is a bipod, barrel change latch, cocking slide, cocking handle, feed tray with cartridge stop and rear anti-aircraft...
The TYP 38 replica is a great choice for those looking for a realistic, historical airsoft rifle. Its solid construction, upgrade potential, and attention to detail make it not only a fun gun to use but also a valuable collector's item. The TYP 38 replica is a faithful reproduction of the historic Japanese Army rifle, produced by S&T Armament (Smart...
A replica of the assault rifle which during the Vietnam War was a standard issue weapon of the American troops. The replica was made of metal elements and of ABS plastic. The barrel guard, and the stock which holds the battery were made of plastic. The rest of the elements such as the receiver, outer barrel and the cocking handle were made of metal. The...
AGM MP007C is an airsoft replica of the iconic German submachine gun, the MP40, from the World War II era. Produced by AGM, this replica is meticulously crafted, staying true to the original, including the foldable metal stock. All the metal components of the original firearm have been precisely reproduced in this replica. PLEASE NOTE!!! Battery and...
CM.033 is a replica of submachine gun made famous in the days of Prohibition era in the United States as a weapon used by both gangsters and police, and during World War II by American soldiers. Butt stock, rear grip, and fore grip is stylized on wood made of plastic. Magazine, frame group, bolt, barrel and receiver are made of metal. The set does not...
Full metal shotgun powered by Green Gas with a muzzle velocity of 300-328 fps (measured on 1 bb). Equipped with a fixed hop-up, 3 inner barrels, switchable fire mode of 3 or 6 bbs at once and gas cartridge stored in the stock or pistol grip (depending on the model). NOTE! You can use shotshells in the Marui standard like CYMA shotshells. The set...
The CM048M replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high...
The Sten 058 MK II SMG by [AGM] resurrects a significant chapter of world history. The Sten, a submachine gun utilized by the British Army during World War II, is notable for its straightforward yet sturdy design. This firearm was developed to rapidly replenish the British Army's substantial equipment losses following the evacuation from Dunkirk, employ...
This time WE company offers a true soviet classic. The MK is a replica of a renowned, 9x18mm Makarov bullet, compact pistol. The replica was made with the utmost care for details. It is a practically “full metal” construction, only side grip linings have been made from polymer. The quality of finish and how perfectly and tightly all parts fit together can...
Historical Russian repeating airsoft gun rifle Mosin-Nagant model m1938 was manufactured by S&T Armament (Smart Team). It was a new gun introduced to the artillery, rear and auxiliary formations. It is recognizable because of the barrel shortened by 222mm. During World War II, it turned out that carbines were better suited as infantry weapons than...
Introducing the latest innovation in Airsoft weaponry, inspired by iconic firearms seen in movies and video games the APS MK-2 Street Sweeper Revolver Shotgun. Crafted with a durable and lightweight polymer body combined with a heavy-duty metal rotating magazine and barrel, this shotgun not only offers realistic weight but also ensures durability during...
CM.045A is a replica of the AKS74U Russian carbine. The new series of replicas from the series 040, 045, 048 which shows the next quality level among Chinese manufacturers. Body, flash hider, top cover, and the folded stock has been made of steel (bent sheet). The remaining elements such as the outer barrel, gas block, the base rear sight, and side rail...
The AGM MP-41 is a high-quality replica of the 1941 Maschinenpistole designed by Hugo Schmeisser. Unlike the MP-40, it features a solid, full-size wooden stock for improved stability and control, making it more suited for infantry use. The receiver is constructed from stamped metal alloy, enhancing durability and authenticity. Additionally, the MP-41...
The CM048 replica is made of steel, metal and high quality plywood with the highest attention to detail. The elements such as the replica’s body, the gas pipe replica, the recoil reducer and the dust cover are made of steel while the other minor metal elements like the magazine are made of an alloy of zinc and aluminum. The pistol grip was made of high quality plastic as the front grip was made of plywood which presents itself great and lies comfortably in the operators hands.
The replica does not have a charger and a battery in the set.
