The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
This combo pack contains a 7.4v lippo battery and smart charger. The nunchuck configuration battery fits most airsoft rifles, and the smart charger will quickly charge and keep the battery topped off, small type tamiya plugs that are common to most airsoft rifles as well.
Please note; battery & charger can looks different (not like on picture)!!!
Charger details;
Quick and easy to use charger with balancer. This charger is compact and light witch can charge 2S/3S Li-ion/LiPo & LiFe battery pack, especially there is a corresponding balance port for each cells.
The charger has two diodes indicating the operating mode.
Use the switch to select the type of battery to charge - LiPO/Li-ion or LiFe.
The charger does not have the option of loading two packages at the same time!
After connecting to the power supply, both LEDs will light up.
The LED on the left informs us that the charger is connected to the power supply and to the right with the status of the battery being charged.
The red light indicates charging. Green light indicates the battery is fully charged.
If the right LED flashes red, stop charging immediately, it means a malfunction.
Charger parameters:
- input voltage: 100-240V AC, 50/60 Hz
- output current: 0,8 A
We recommend buying an alarm / meter for LiPo batteries to easily and quickly monitor the battery condition.
WARNING
* *ONLY* for 7,4V/11,1V Li-ion, Li-Po/Li-ion or LiFe batteries
* Charging two batteries at same time is forbidden, *ONLY* one package at one time
NOTE!The charger is designed for indoor use only. Do not leave the charger unattended during charging.
NOTE!The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods.
NOTE!Don't cover the charger when charging, ambient temperature shall not be more than 30oC
NOTE!Do not leave batteries charging on flammable surfaces, wood surface or carpet.
NOTE!Cut off the power supply before connect or disconnect the charger with batteries.
NOTE!Don't try to disassemble the charger, High voltage inside, danger!
Never leave the battery pack unattended. Especially do not connect it to the charger for the whole night!
When charging the battery, it is recommended to put it in the "safety battery charging bag".
Avoid short-circuits and mechanical damage to the battery.
Mechanical damage or improper battery charging may lead to the fire of the battery!
Battery details;
LiPo batteries are characterised by a positive capacity-to-weight ratio and a low self-discharge rate, which benefits their use. The lithium-polymer batteries we offer are built with two (7.4V) or three (11.1V) cells. These cells are small in relation to the offered capacity, thanks to which they can be used in replicas where space for a battery is limited. Rifles powered by this type of energy source will work more efficiently and longer, compared to the traditional type of batteries.
Dimensions: 13 x 2,1 x 0,7 (cm x cm x cm)
Capacity: 1500 mAh
Voltage: 7,4 V
Maximum discharge power (semi fire): 30A
Maximum discharge power (auto fire): 60A
Canteen for water only - Made of 100% pvc - Green color
Arcturus PP19-01 Vityaz ZTAC SP1 CQB AEG FE™ submachine gun A replica of the PP-19-1 Vityaz submachine gun made by Arcturus equipped with a set of tuning parts inspired by Zenitco accessories. The PP-19-1 Vityaz AEG was made mainly from steel, aluminium and a durable polymer. Steel is used for the flame suppressor, bowstring, gas tube, handguard stock,...
JG069MG submachine gun replica The replica's components are made from plastics and metal. The stock rail, front iron sights, fire mode selector, magazine release and the trigger are made of metal. Magazine box and two sling mounting points are made of steel. Adjustable length of the stock allows the user to adapt the replica to his or hers physique and...
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
Very well made holster designed for pistol replicas. It is designed for safe and easy pistol handling. After pistol is locked up trigger is fully hidden so there is no possibility to fire. The safety lock gives possibility to single-motion draw and greater protection against attempted weapon takeaways. Holster is designed for right handed users. Weight:...
Product Description Spare magazine for KJ Works M4/M16 Series Airsoft GBB Rifle Constructed of FULL METAL housing that is strong to drop on the floor Top Gas ready right out of the box Suitable for 6mm Plastic BB only Loading Capacity: 30 Rounds
Arcturus LWT MK-I CQB 10" The airsoft carbine from Arcturus model LWTMK-I CQB 10" AEG SPORT SE™ has been made primarily using PA66 Nylon, which has been reinforced with fibreglass. The slide ring, the screws at the handguard, the tactical sling mount, the QD mount, and the dummy slide were made from steel . At the same time, the discharge device,...
Weight: 240 g Material: 600D polyester Color: wooden Camouflage: tan
SF E1L Outdoorsman Flashlight An aluminium diode flashlight powered by a single CR123A battery. CREE R2 LED diode provides brightness of up to 250 lumens. Tempered glass is very durable to all sorts of shocks. The set includes:- flashlight- additional switch- leash
Canteen for water only - Made of 100% pvc - Black color
Diameter 5.95mm +/- 0.01mm. Highest Quality which affects effective accuracy, good shot grouping, long range and minimal jamming. Suitable for 6.01mm precision barrels. 6MM AIRSOFT BB [KILO9]
CM040D replica The replica is made of steel and high-quality ABS. Made of steel are silencer , dummy pipe gas, body with gunbody cover, fire selector and other minor components of metal instead of steel applications, provides much greater resistance to a large variety of damage. The magazine is made of ABS (hicap) and pistol and front grip. The hop up...
Magazine pouch can hold AK47/AKM magazines or many other accessories. The open design provides fast reload and a additional rubber cord with a comfortable grip protects magazine from falling. Compatible with all MOLLE platforms.
Weight: 15gMaterial: PVCLength: 80mmHeight: 45mm
Made of plastic a replica of German compact pistol P229. Pistol is made of a high-quality composite that is reminiscent of the polymer used in the original. Slide is made of plastic with a smooth texture that imitates oxidized steel.
TITAN V3™ Advanced Set - at once you purchase all you need to take total advantage from TITAN. It includes TITAN with ADVANCED firmware edition. The ADVANCED firmware edition offers wide variety of functions and is dedicated for those who like complex solutions. It enables access to the Statistics and TITAN World Rankings. To learn all the differences...
This combo pack contains a 7.4v lippo battery and smart charger. The nunchuck configuration battery fits most airsoft rifles, and the smart charger will quickly charge and keep the battery topped off, small type tamiya plugs that are common to most airsoft rifles as well.
Please note; battery & charger can looks different (not like on picture)!!!
