Compact LIPO charger B3Pro

This B3Pro charger is compact and light, which can charge 2s or 3s LiPO and Li-Ion battery pack (7,4/11,1V). There is a separated corresponding balance port for each battery pack.

The charger has 3 LEDs, after connecting to the power supply, the LEDs will glow green - information that the device is ready for operation. After connecting the battery, the LEDs will change from green to red in the amount corresponding to the number of battery cells - this means that the charging process is started.

When charging is complete, the LEDs turn from red to green - the battery is fully charged.

Charger parameters:

input voltage: 100-240V AC, 50/60 Hz

output current: 800mA

Weight: 115 g

Battery type: Li-ion, LiPo

We recommend buying an alarm / meter for LiPo/Li-Ion batteries to easily and quickly monitor the battery condition.

WARNING

ONLY for LiPo/Li-Ion batteries

Charging two batteries at same time is forbidden, ONLY one at time

NOTE! The charger is designed for indoor use only. Do not leave the charger unattended during charging.
NOTE! The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods.
NOTE! Don't cover the charger when charging, ambient temperature shall not be more than 30oC
NOTE! Do not leave batteries charging on flammable surfaces, wood surface or carpet.
NOTE! Cut off the power supply before connect or disconnect the charger with batteries.
NOTE! Don't try to disassemble the charger, High voltage inside, danger!

Never leave the battery pack unattended. Especially do not connect it to the charger for the whole night! When charging the battery, it is recommended to put it in the "safety battery charging bag". Avoid short-circuits and mechanical damage to the battery. Mechanical damage or improper battery charging may lead to the fire of the battery!