The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Battery charger for NI-MH / NI-CD batteries - 8.4/9.6V.
This microprocessor charger automatically disconnects after charged the battery, completing the charging process, signaling the -green LED- battery charged.
It has a signaling LED, the red color means charging and the green color - battery is full.
Thanks, microprocessors charging is fast and the battery is charging optimally.
Your battery will never be overcharged, and you do not have to calculate the battery charging time.
Using this charger will significantly extend the life of the battery.
The charger has a small Tamiya connector, is suitable for most common batteries.
The charger is dedicated to the battery with a number of cells from 4 to 8 and a capacity no more than 1600mAh.
Battery charger for NI-MH / NI-CD batteries - 8.4/9.6V.
This microprocessor charger automatically disconnects after charged the battery, completing the charging process, signaling the -green LED- battery charged.
It has a signaling LED, the red color means charging and the green color - battery is full.
Thanks, microprocessors charging is fast and the battery is charging optimally.
Your battery will never be overcharged, and you do not have to calculate the battery charging time.
Using this charger will significantly extend the life of the battery.
The charger has a small Tamiya connector, is suitable for most common batteries.
The charger is dedicated to the battery with a number of cells from 4 to 8 and a capacity no more than 1600mAh.
Charger parameters:
- input voltage: 100-240V AC, 50/60 Hz
- output voltage: 15 V
- output current: 1 A
NOTE!The charger is designed for indoor use only. Do not leave the charger unattended during charging.
NOTE!The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods.
NOTE!Don't cover the charger when charging, ambient temperature shall not be more than 30oC
NOTE!Do not leave batteries charging on flammable surfaces, wood surface or carpet.
NOTE!Cut off the power supply before connect or disconnect the charger with batteries.
NOTE!Don't try to disassemble the charger, High voltage inside, danger!
Never leave the battery pack unattended. Especially do not connect it to the charger for the whole night!
When charging the battery, it is recommended to put it in the "safety battery charging bag".
Avoid short-circuits and mechanical damage to the battery.
Mechanical damage or improper battery charging may lead to the fire of the battery!
GFC Energy LiPo smartchargerA very intuitive and easy to use smartcharger by GFC Energy, equipped with a built-in balancer. Can be used to charge both 7,4 V as well as 11,1 V LiPo batteries. The charger is supplied with an autodetection system allowing it to Automatically go into standby mode after the charging process is finished.CAUTION! The charger...
Multiprocessor Charger with a Balancer Material: Metal + Polymer Weight: 530g Measurements: 135x145x35mm Manufacturer: Electro River™ NOTICE! Charges are covered only by starting warranty.
Charger for low-capacity batteries for AEP pistol replicas. Remember that it is not allowed to charge the battery placed in the replica! The battery fits the charger [IP-MICRO]
Charger LED status;Power on; Green Normal; BrightStatus indicationCharging; RedFull Charged; GreenFailure; RED BLINK
This modern microprocessor charger is designed for NiMH and NiCD batteries. Suitable for batteries with the number of cells from 1 to 8.It recognizes the battery status and automatically stops the charging process when the battery is full. NOTICE! Charges are covered only by starting warranty.
Charger Specification: Input Voltage: 100-240V (AC)Charging Voltage: 3A maxMax Charging Rate: 25WCharger Type: LiPo/LiFe/NiMHLiPo/LiFe: 25/35NiMH: 1-85Balancing Current: 200 mAh NOTICE! Charges are covered only by starting warranty.
Quick and easy to use charger with balancer. After connection to power one of three LED s will flask. When charging is completed the one of three LED s will light constant. NOTICE! -Charges are covered only by starting warranty. - Can be yellow or blue (pictures)
Delta Charger with Integrated Balancer A specialist, microprocessor charger with an LCD display. The charger features quick charge option of various types of cells and is equipped with cell balancer, that enables more accurate charging of lithium packets, as well as highly-efficient microprocessor and specialist software. Delta charger is compatible with...
A very intuitive and easy to use smartcharger by GFC Energy. Can be used to charge NiMH batteries. The charger is supplied with a cell count autodetection system.
Easy to use NiMH battery charger.The charger uses 110-240V AC main power.Charges NiMH, NiCd batteries with up to 2A charge current.For 7,2V, 8,4V and 9,6V batteries. High quality, safe and durable.Tamiya Large plug. With led indicators. NOTICE! Charges are covered only by starting warranty.
This combo pack contains a 9.6v NiMH nunchuck battery and smart charger. The nunchuck configuration battery fits most airsoft rifles, and the smart charger will quickly charge and keep the battery topped off. Both have small type tamiya plugs that are common to most airsoft rifles as well. Please note; battery & charger can looks different (not...
Redox Alpha V2 microprocessor battery charger A new improved version of the popular Redox company’s Alpha charger. The Redox Alpha V2 is inter alia equipped with an actualized software ensuring a long and stable operation of the device. Additionally, a big radiator which discharges the heat very efficiently was mounted on the top of the charger. It is...
Weight: 5 g code IP ALARM
Adapter for Li-Po batteries for electric pistols. Thanks to the use of this adapter, you can connect the battery to the professional chargers. It allows you to check all battery parameters while charging.
Redox Alpha V2 battery charger COMBO (with power supply) A new improved version of the popular Redox company’s Alpha charger. The Redox Alpha V2 is inter alia equipped with an actualized software ensuring a long and stable operation of the device. Additionally, a big radiator which discharges the heat very efficiently was mounted on the top of the...
Battery charger for NI-MH / NI-CD batteries - 8.4/9.6V.
This microprocessor charger automatically disconnects after charged the battery, completing the charging process, signaling the -green LED- battery charged.
It has a signaling LED, the red color means charging and the green color - battery is full.
Thanks, microprocessors charging is fast and the battery is charging optimally.
Your battery will never be overcharged, and you do not have to calculate the battery charging time.
Using this charger will significantly extend the life of the battery.
The charger has a small Tamiya connector, is suitable for most common batteries.
The charger is dedicated to the battery with a number of cells from 4 to 8 and a capacity no more than 1600mAh.
![AEP BATTERY CHARGER [CYMA]](https://airsoftguns.ie/19561-home_default/aep-battery-charger-cyma-.jpg)
