The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the price. Now, every beginner will be able to afford to buy their favorite rifle and start the adventure with ASG with reliable replica for lower price
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the price. Now, every beginner will be able to afford to buy their favorite rifle and start the adventure with ASG with reliable replica for lower price.
Specification:
· 10.5" external barrel, with a internal barrel 6,03mm diameter
· 6.25" nylon handguard with picatinny rails
· nylon A3 flat top upper receiver
· nylon lower receiver with 6 position stock
· polymer pistol grip
· folding rear sight
· steel magazine 300 rounds
· dummy flash hider with a 14mm thread CCW (Possibility to mount a dummy silencer)
· ambidextrous sling mount plate
· steel gear set with 8mm bearings
· bearing piston head
· bearing spring guide
· cylinder type 1
· this model is equipped with a Rotary hop-up chamber. Now the adjustment of the hop-up system is very easy and precise.
· replica has a powerful engine with increased torque equipped with neodymium magnets.
· gearbox shell with quick spring replacement system
The most important think, is that all accessories from other brand are compatible with this model, this influence on the longevity of your replica and on upgrade part and performance.
Hop up: adjustable
Barrel thread type: counter-clockwise
Weight: 2320 g
Magazine material: steel
Bearings type: steel sliding
Gearbox version: v.2
Bearings diameter: 8 mm
Magazine model: hi-cap
Battery type: NiMH
Accumulator connector type: small Tamiya
Battery cells type: mini
Battery included in set: YES
Material: aluminum, nylon
Color: black
Fire type: auto, single
Serial number: YES
Length mm: 710
Inner barrel length mm: 280
Muzzle energy J: ~1
Magazine capacity BBs: 300
Muzzle velocity fps: ~328
Inner barrel diameter mm: 6.03
Battery voltage V: 8,4
Battery capacity mAh: 1100
Barrel thread diameter millimeters: 14
Set included:
· AR-15 replica
· 300rd magazine
· 8,4V 1100 mAh battery
· battery charger
NOTICE! Replica have a unique serial number!
Every replica pass initial check up. It's being checked and overshooted on XCORTECH X3200 chronograph.
Batteries and chargers are covered only by starting warranty.
G&G CM16 Raider M4 CQB RIS - Construction with SPECIAL FORCE Marking, - Fully/Semi Automatic Shooting Airsoft Electric Gun (AEG), - Black Color Version
A replica of the ARMY ARMAMENT company which is famous for the quality of its products and attention to detail. The replica is made of aluminium alloy and ABS. The bed was made of high quality plastic. Just like in the firearm, a two-stage trigger was used, pulling the trigger halfway allows single shot, while pulling the end its go to auto fire. The...
It's a replica of the newest series of Arcturus LITE, in which the upper and lower receivers were made of durable nylon. Thanks to the nylon body, the weight and the price of the replica were reduced. Using the nylon, the replica did not lose its strength, because the socket of the receiver extension tube and a barrel socket with a thread for the...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
H.M.G. PARA Machinegun replica Classic infantry support machinegun modified for light inf. or paratroopers, lightweight and first of all very mobile for it”s category – thanks to which it”s easier to handle and carry in comparison to his standard issue cousins. The popular and approved by the community design will prevail in every situation. This replica...
battery with charger inc. The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer. The make is fully compatible with the Tokyo Marui standard, the replicas are equipped with metal...
A series of American assault rifle replicas manufactured by CYMA. The replica is characteristic for its beneficial quality to price ratio known from previous products from the company. Replicas were made fully compatible with the Tokio Marui standard and equipped with metal Hop-Up chambers. Particular elements of the replica were made in a way...
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
The CM company"s CM042A is another modified version of the legendary AK carbine The replica was made of metal elements and ABS. The profiled pistol grip, the tactical grip, the stock and the front grip with the magazine are made of plastic. The barrel, the body, the iron aiming sights, the trigger and the trigger guard are made of metal.
CM007 assault rifle replica - black The newest series of the American assault rifles’ replicas which is made by the CYMA company. The replica characterizes itself with the quality offered for a reasonable price which is known from the other product of this manufacturer. The make is fully compatible with the Tokyo Marui standard, the replicas are equipped...
The A2 version of the Steyr AUG rifle is the civilian version of the AUG series licensed by Steyr Mannlicher, Austria. On the A2 you get an accessory rail where you can mount your preferred aiming device. Like on the A1 version the front grip is collapsible and the internals are metal constructed. Free battery and free charger
CM.051 is a replica of a submachine gun made famous in the days of Prohibition-era in the United States as a weapon used by both gangsters and police, and during World War II by American soldiers. The buttstock, pistol grip, and foregrip are stylized on wood made of plastic. Magazine, receiver, frame group, bolt, bolt handle, safety, trigger, magazine...
Replica made by Double Bell with good performance and used quality materials. Magazine, flash suppressor, magazine catch, safety selector lever, bolt catch, charging handle latch, pins are made of metal, other elements such as outer barrel, handguard, receivers are also made of metal alloy. The stock and pistol grip are made of plastic. Mechanism of...
Introducing a sturdy recreation of the Submachine Gun MK7 by S&T, a formidable counterpart to the renowned Sten, further establishing its status as an iconic weapon in the British armed forces. Crafted from stamped steel, this firearm is a specialized model within the Sterling SMG family. The Sterling Mk.7 is essentially a modified version of the...
Replica of the new series of assault rifles from CYMA, This carabine are produce in different specification that include civil or military. The lower receiver, the upper receiver, the stock tube, the external barrel, the fire selector, the magazine release button, the trigger , the charging handle and the front and rear sigth are made in aluminium, that...
CM.033 is a replica of submachine gun made famous in the days of Prohibition era in the United States as a weapon used by both gangsters and police, and during World War II by American soldiers. Butt stock, rear grip, and fore grip is stylized on wood made of plastic. Magazine, frame group, bolt, barrel and receiver are made of metal.
Replica of a new series of nylon fiber rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard) allowed reduced the price. Now, every beginner will be able to afford to buy their favorite rifle and start the adventure with ASG with reliable replica for lower price
![M4 CM.518 - Black [CYMA] Airsoft rifle](https://airsoftguns.ie/16455-home_default/m4-cm518-black-cyma-airsoft-rifle.jpg)
![M4 CM.603 - BLACK [CYMA]...](https://airsoftguns.ie/15624-home_default/m4-cm603-black-cyma-airsoft-rifle.jpg)
![M4 CM.007 Full Metal [CYMA]...](https://airsoftguns.ie/14678-home_default/m4-cm007-full-metal-cyma-ris-carbine-aeg-rifle.jpg)
![M4 CM.068C Full Metal [CYMA] Key-Mod AEG Rifle](https://airsoftguns.ie/16222-home_default/m4-cm068c-full-metal-cyma-key-mod-aeg-rifle.jpg)
