Home
Best Sellers
All best sellers

  • Banner

    Banner left 1
FULL GEARBOX SET 8MM (VERSION 2, REAR WIRING) FOR M4/M16 [CYMA]
  • FULL GEARBOX SET 8MM (VERSION 2, REAR WIRING) FOR M4/M16 [CYMA]
  • FULL GEARBOX SET 8MM (VERSION 2, REAR WIRING) FOR M4/M16 [CYMA]
  • FULL GEARBOX SET 8MM (VERSION 2, REAR WIRING) FOR M4/M16 [CYMA]
  • FULL GEARBOX SET 8MM (VERSION 2, REAR WIRING) FOR M4/M16 [CYMA]

FULL GEARBOX SET 8MM (VERSION 2, REAR WIRING) FOR M4/M16 [CYMA]

FBP1631
CYMA

Completed Gearbox set ready to upgrade

Come With Motor

The spring 115 used in the gearbox will give you +/- 380 FPS - depend on the barrel and hop-up unit, used in your replica.

Essential part for upgrading your Airsoft Electric Gun AEG

To build a tight & durable gearbox

Compatible with Tokyo Marui, JG, AGM, CM - M4/M16.

8mm Bearing Enhanced Gearbox

Anti-Heat & Anti-Wearing Construction

Suitable for Version 2 Airsoft Electric Gun AEG Rifle

NOTE! If you decide to handwritten assembly of any part of such mechanical Gearbox Gears, piston, cylinder kit, skeleton GB, bearings, etc. we can not be held responsible for the assembly, this equates to a loss of warranty on the part.

Weight: 700 g

Gearbox version: v.2

Bearings diameter: 8mm

Material: metal

€69.95
Tax included
Quantity

Description

Product Details
FBP1631
GPSR

Brand: CYMA

4 other products in the same category:
REINFORCED GEARBOX SHELL FOR V.2 SERIES [J.G.WORKS] REINFORCED GEARBOX SHELL FOR V.2 SERIES [J.G.WORKS]

Reference: A-X004B

Brand: Jing Gong (JG)

REINFORCED GEARBOX SHELL FOR V.2 SERIES [J.G.WORKS]

Gearbox type V2 with reinforced construction. The front part has been strengthened, the most exposed to damage has been considerably thickened, and the place of the contact with the cylinder has been improved so as to evenly transfer the loads. It is prepared for mounting 8mm bearings. Mounting this gearbox to replicas of other manufacturers than J.G. ,...
€29.95
More REINFORCED GEARBOX SHELL FOR V.2 SERIES [J.G.WORKS]
In stock
AEG AR-15/M4 AMBIDEXTROUS MAGAZINE RELEASE - BLACK [CYMA] AEG AR-15/M4 AMBIDEXTROUS MAGAZINE RELEASE - BLACK [CYMA]

Reference: FBP1783

AEG AR-15/M4 AMBIDEXTROUS MAGAZINE RELEASE - BLACK [CYMA]

The catch is ambidextrous so can be installed for either left or right handed shooters, is made of sterner materials than some stock mag catches and has a strong but purposeful feedback to the action. Making sure you have replacement parts on hand can avoid tactical blunders in the field so don't hesitate to get supply of replacement parts, especially...
€6.95
More AEG AR-15/M4 AMBIDEXTROUS MAGAZINE RELEASE - BLACK [CYMA]
In stock
MOSFET GEARBOX V.2 - BLUE [CYMA] MOSFET GEARBOX V.2 - BLUE [CYMA]

Reference: FBP4141

MOSFET GEARBOX V.2 - BLUE [CYMA]

A complete V2 gearbox from the BLUE seriesequipped with a MOSFET system. It is a complete gearbox ready for installation in the replica. It is equipped with metal gears, a polymer piston with a full rack,piston head and silent aluminum cylinder. Bearings with a diameter of 8 mm are mounted in the gearbox shell. The mosfet system is equipped with an...
€164.95
More MOSFET GEARBOX V.2 - BLUE [CYMA]
In stock
Gearbox V.3 - BLU - REARE WIRING [CYMA] Gearbox V.3 - BLU - REARE WIRING [CYMA]

Reference: FBP4159

Gearbox V.3 - BLU - REARE WIRING [CYMA]

A complete V3 gearbox from the BLUE series with wiring to the stock. It is a complete gearbox ready for installation in the replica. It is equipped with metal gears with a standard ratio of 18: 1, a polymer piston with a full metal rack. Silent aluminum cylinder and piston head. The cylinder is made of anodized aluminum, resistant to abrasion and...
€139.95
More Gearbox V.3 - BLU - REARE WIRING [CYMA]
In stock

Follow us on Facebook

Facebook