The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Replica cover - 1200mm OLIVE
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Additionally, the cover is equipped with inner pockets for magazines and other accessories which are required during a skirmish. On the back part of the cover there is a zipper which is placed across the cover and which allows access to a flat pocket located on the cover"s surface. The cover can be transported both, in a hand, like bag and on the back like a backpack.
Weight: 625 g Material: nylon Color: black Length: 320 mm Width: 250 mm Height: 65 mm
The bag is made of nylon fiber. Thanks to the large amount of dividers and pockets, it is possible to carry many tools and minor accessories. The bag can be mounted on the PALS webbing which meets the MOLLE standard, it can be worn on a waist belt or on the shoulder. The main compartment is 215x80x170mm big and is equipped with a inner flat pocket. The...
Weight: 1680 gMaterial: 600D polyesterColor: oliveLength: 900 mmWidth: 65 mmHeight: 340 mm
1 LITRE HYDRATION RESERVOIR BLADDER - OLIVE- Hydration pack just for cold drinks.
101 INC® Backpack Mountain Backpack Mountain made of 100% nylon. The backpack is provided with 4 different storage compartments with zipper. Provided with Molle on the front and side. The total volume of the backpack is 45 liters. Dimensions: Front pocket small: 14 x 21 x 8 cm Front pocket large: 25 x 21 x 12 cm Center compartmentt: 43 x 26 x 10 cm Main...
Spare hydration bladder Capacity: 3 L
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Double rifle gun case have two main pockets, bigger one have 82 cm long and shorter one have 60 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 25 cm. Weight: 1000 g Material: 1000D polyester Camouflage: coyote Length mm:820 Width milimeters: 280
Material: nylon 600DColor: oliveLength: 1050 mmWidth: 65 mm
101 INC® US Assault Backpack Backpack US Assault, a sturdy daypack with a capacity of 25 liters. This backpack is perfect for when you go on a daytrip, for school or during cycling. Due the lightweight design, the US Assault bag is really comfortable during hikes and various other outdoor activities.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
Kitbag 5 rings Made of 100% cotton Dimension: 40 x 40 x 90 cm
Weight: 1000 g Material: 1000D polyester Color: black Package quantity: 1 pcs. Length: 820 mm Width: 280 mm
Canteen for water only - Made of 100% pvc - Green color
Kids backpackDimension: 30 x 12 x 35 cm Made of 100% cotton
Utility backpack made by high density Nylon material, 1" molle webbing throughout the backpack, Removable sternum strap, Adjustable shoulder, chest and waist strap, Hydration system drink tube exit hole on top of the backpack,
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
![9" nylon gun case - BLACK [SRC]](https://airsoftguns.ie/16250-home_default/9-nylon-gun-case-black-src-.jpg)
