The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
Madbull PWS Diablo Compensator CQB OD airsoft, Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacture
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
There are 20 products.
Active filters
Hop-Up rubber made from silicon. It is designed for mechanism with spring up to 120 m/s.
Hop-Up Bucking for Tuned Replicas The Hop-Up bucking was made from silicon, which causes it to retain its quality in low temperatures, because it does not harden as is the case with ordinary rubber buckings. This model performs best in replicas with increased muzzle velocity.
Includes Bucking 70 Degrees Of Hardness For Marui Style AEG Barrels
A hop-up rubber specially created for demanding shooters. Suitable for VSR-10 replicas and clones (VSR10,MB03 ...) for Marui, WE, KJW - 1911 gas pistols, Hi Capa, SIG, KP05, KP06 ... Thanks to its innovative design, it provides the perfect position of the bb before the shot, which guarantees perfect curling and repeatability of results. The specially...
Weight: 40 g Material: aluminum HIGH PERFORMANCED HOP-UP FOR M4/M16
High quality professional HopUp rubber made of specially selected blend of silicone rubber. When correctly installed it will improve the tightness and BB's performance. Manufactured by Action Army company from Taiwan. Dedicated to Marui standard replicas: VSR-10, Hi-Capa, Glock, PX4, FN5-7, P226, Detonics, M1911, MEU, SOCOM and similar. Also fits WE GBB...
G&G Green Hop Up Rubber (40 degree). The Hop-Up rubber was made of silicon thanks to which is keeps it properties even in low temperatures due to the fact that it does not get stiff just like in the case of regular rubber. It performs perfectly both in typical conditions as in negative temperatures – it keeps it properties even in the temperatures...
Guarder airsoft hop up bucking improve shooting accuracy, ballistic trajectory stability, air-tightness & firmness. Constructed of Silica Gel that is hard.
Metal Hop-Up chamber for AK series Made of: Metal Manufacturer: CYMA
SHS Hop Up Chamber Set for airsoft G36 Series/SL8/SL9/UMP AEG, Original Hop Up Chamber. Upgrading AEG require necessary skill & technique
A complete hop-up chamber designed for replicas of the WELL series MB sniper rifles. The product is made almost entirely of metal. The exception is the plastic arm that presses the spacer and the hop-up rubber. Made of: metal + plastic Weight: 60g Colour: Black Producer: WELL
Hop-Up rubber made from silicon. It is designed for mechanism with spring from 130 m/s.
The plastic made hop-up chamber is made by the JG company and is designed for the AUG replicas. The plastic make preserves the parameters whenever the chamber is used in low-temperatures.
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
PDI Repair kit for VSR-10 PDI Chamber The repair kit includes spare o-rings, screws and other small pieces that can be damaged or lost from the new PDI hop-up unit (for VSR-10 / G-Spec). The entirely new hop-up unit includes entirely new parts and so requires entirely new types of replacement components so here they are.
This One-Piece ProWin G36 CNC Aluminum Airsoft Hopup Chamber Set is more durable and accurate in feeding BB, Improves Firmness of the chamber
Barrel lock clip for inner barrel, An upgrade part for fixing the inner barrel to the hop-up chamber, a small notch fits into the grove on the inner barrel and prevents it from accidental twisting lose when mounting flash hiders and Barrel Extension Tubes, ensuring consistent accuracy and optimal performance.
High quality professional HopUp rubber made of specially selected blend of silicone rubber. When correctly installed it will improve the tightness and BB's performance. Manufactured by Action Army company from Taiwan. Product Information; Dedicated to replicas that conform to the Maruzen type 96 standard and similar. Action Army Hop Up Bucking for Type...
PDI Repair kit for APS-2/Type-96/SR-2/M24 The repair kit includes spare o-rings, screws and other small pieces that can be damaged or lost from the new PDI hop-up unit (APS-2/Type-96/SR-2/M24). The entirely new hop-up unit includes entirely new parts and so requires entirely new types of replacement components so here they are.
Features: Precision CNC machined aluminum construction Weather resistant anodized finish Improved durability Material: CNC Machined Aluminum
![HOP-UP RUBBER 50A [BATTLEAXE]](https://airsoftguns.ie/12285-home_default/hop-up-rubber-50a-battleaxe-.jpg)
