- Combat Gear
- Airsoft guns
- Batteries & Chargers
- BBs 6mm pellets
- Gas - Co2 - Oil
- Spare & Upgrade parts
- AEG Parts
- Precision Barrels & Outer
- Maintenance & Tools
- GBB Parts
- Mosfets & other
- Gift Vouchers & Deposits
- MILITARY SPRAY PAINTS
- outdoor & survival
- Knives, multitool
Madbull JP7 inch Hnadguard - Carabine. The JP Hand Guard System allows you to mount rails in any position for complete flexibility without wasted weight and features you don't need.
An aluminium diode flashlight powered by CR123A battery. Tempered glass is very durable to all sorts of shocks and the mount is resistant to small vibration and can be attached to any Picatinny 22 mm mounting rail. The set includes two switches: a gel button - pressure initiated and a second, traditional on/off button.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
King Arms High Torque Motor -- Type MEDIUM for AEG -- The Aluminum Axis Bushing.-- High-Torque Motor-- Case and End Bell with Ball Bearing installed-- King Arms airsoft Motor Pinion Gear (Thermal Treatment)
G&G cold-resistant Hop-up Rubber
G&G Green Hop Up Rubber (40 degree). The Hop-Up rubber was made of silicon thanks to which is keeps it properties even in low temperatures due to the fact that it does not get stiff just like in the case of regular rubber. It performs perfectly both in typical conditions as in negative temperatures – it keeps it properties even in the temperatures reaching 40 degrees below zero.
Your hop up rubber is the part that is reponsible for adding lift to your BB's - it is a piece of rubber that surrounds the barrel, so that when BB's pass through they are shoved under the hop up rubber which adds backspin, and thus lift.
In Ireland the G&G Green Cold Weather hopup rubber is regarded as one of the best, if not the best. Due to the average temperature of our climate, combined with the power limit of our guns, there are very few products that can even come close to rivalling it. It's a 40 degree soft hop up rubber, that requires very little time to 'heat up' in use to reach its maximum effectiveness.
As with all soft hop up rubbers we would strongly recommend using a hard nub in conjunction as it will give you more finite adjustment. This hop up rubber is compatible with the vast majority of AEG's however please take care when installing.
16 other products in the same category:
A complete hop-up chamber designed for replicas of the WELL series MB sniper rifles. The product is made almost entirely of metal. The exception is the plastic arm that presses the spacer and the hop-up rubber. Made of: metal + plastic Weight: 60g Colour: Black Producer: WELL
PDI Repair kit for APS-2/Type-96/SR-2/M24 The repair kit includes spare o-rings, screws and other small pieces that can be damaged or lost from the new PDI hop-up unit (APS-2/Type-96/SR-2/M24). The entirely new hop-up unit includes entirely new parts and so requires entirely new types of replacement components so here they are.
Barrel lock clip for inner barrel, An upgrade part for fixing the inner barrel to the hop-up chamber, a small notch fits into the grove on the inner barrel and prevents it from accidental twisting lose when mounting flash hiders and Barrel Extension Tubes, ensuring consistent accuracy and optimal performance.
High quality professional HopUp rubber made of specially selected blend of silicone rubber. When correctly installed it will improve the tightness and BB's performance. Manufactured by Action Army company from Taiwan. Dedicated to Marui standard replicas: VSR-10, Hi-Capa, Glock, PX4, FN5-7, P226, Detonics, M1911, MEU, SOCOM and similar. Also fits WE GBB...
High quality professional HopUp rubber made of specially selected blend of silicone rubber. When correctly installed it will improve the tightness and BB's performance. Manufactured by Action Army company from Taiwan. Product Information; Dedicated to replicas that conform to the Maruzen type 96 standard and similar. Action Army Hop Up Bucking for Type...
PDI Repair kit for VSR-10 PDI Chamber The repair kit includes spare o-rings, screws and other small pieces that can be damaged or lost from the new PDI hop-up unit (for VSR-10 / G-Spec). The entirely new hop-up unit includes entirely new parts and so requires entirely new types of replacement components so here they are.