The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
There are 23 products.
Active filters
Precisely made barrel, with internal diameter 6.02 mm, provides precision and accuracy. Has been carefully made of chrome plated brass. Fits all replicas in the type 96 standard such as Well MB01/06/08. When mounting this barrel in CM.702 / 706 replicas, it is necessary to replace the hop-up bucking with a 96 type bucking. Precision inner barrels allow...
Designed for: the M16A1/ A2/ VN AUG+ type replicas Diameter: 6,01 mm Length: 509 mm Weight: 70 g Made of: stainless steel and aircraft aluminum Manufacturer: Modify
Made of: steel Weight: 130g Diameter: 6,03mm Length: 450mm Manufacturer: PPS Airsoft/SHS
Made of: steel Weight: 80g Diameter: 6,03mm Length: 363mm Manufacturer: PPS Airsoft
Weight: 140 g Length: 363 mm Internal diameter: 6,02 mm
Made of:Steel Weight: 120g Diameter: 6,03mm Length: 510mm Manufacturer: PPS Airsoft/SHS
6,03 steel precision inner barrel - 247 mm Precision inner barrel with a length of a 247 mm and 6,03mm diameter manufactured by PPS Airsoft. Precision barrel adds a lot to accuracy, range and repeatablitity of a shots. Precision barrel requires high quality BB"s used.
Precisely made barrel, with internal diameter 6.02 mm, provides precision and accuracy. Dedicated to replicas in the VSR 10. Has been carefully made of chrome plated brass. Precision inner barrels allow for better compression, improved accuracy, and in a few cases increase muzzle velocity. Although precision barrels often require more maintenance and...
Airsoft Accessory Series -- Profile Gas Block -- Suit for Marui M4 Series Outer Barrel -- Black Color Version
6,03mm steel precision inner barrell - 400 mm The mount of the precision barrel improves the replica’s precision and range and also the repeatability of shots. The mount of the 6,03mm precision barrel in the replica requires the use of high quality BB pellets.
Made of: brass Weight: 50g Diameter: 6,03mm Length: 229mm Manufacturer: PPS Airsoft, SHS
6,03mm steel precision inner barrell - 590 mm The mount of the precision barrel improves the replica’s precision and range and also the repeatability of shots. The mount of the 6,03mm precision barrel in the replica requires the use of high quality BB pellets.
Included 3-Ring Hop-up Bucking Adjustable Outer Diameter Reduced Barrel Vibration Balanced Weight
Made of: steel Weight: 100g Diameter: 6,03mm Length: 450mm Manufacturer: PPS Airsoft/SHS
The spacer set for inner barrel prevent it from vibrations and any problems with alignment. Particularly recommended for precision barrels as well as for long internal barrels. Made of durable polymer and additional rubber rings prevent their movement while suppressing all vibrations. Matches for Well MB01, MB08, MB01/08.
6,03 steel precision inner barrel - 285 mm Precision inner barrel with a length of a 285 mm and 6,03mm diameter manufactured by PPS Airsoft. Precision barrel adds a lot to accuracy, range and repeatablitity of a shots. Precision barrel requires high quality BB"s used.
The spacer set for inner barrel prevent it from vibrations and any problems with alignment. Particularly recommended for precision barrels as well as for long internal barrels. Made of durable polymer and additional rubber rings prevent their movement while suppressing all vibrations. Matches for Cyma 701, MB03, Bar 10. Diameter without o-rings 9,6/18,25...
Made of: brass Weight: 55g Diameter: 6,03mm Length: 247mm Manufacturer: PPS Airsoft, SHS
Weight: 105 g Material: brass Length: 454 mm Internal diameter: 6,03 mm
Weight: 105 g Material: brass Length: 510 mm Internal diameter: 6,03 mm
