Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 106 products.
Active filters
3V CR1620 Lithium battery 1pcs. Suitable for most illuminated scope or dot sight. Also used for calculators, cameras, watches, computer motherboard and other electronic products.
9.6V NiMH Butterfly / Nunchuck Battery For Electric AEG - 1600 mAh is designed specifically for use with a Crane Stock. The battery is pack is separated into two halves to fit the slots of the crane stock around the buffer tube. NOTICE! Batteries are covered only by starting warranty.
Plug and socket set. Large contact surface. Heat resistant polymer. Held in place with spring tension.
Set of two lithium batteries CR2032 manufactured by Energy Cell Is used to power flashlights, dots and scopes with illuminated cross. One package includes two batteries. Weight: 10 g Diameter mm: 19 Battery voltage V: 3
Weight: 170 g Accumulator type: NiMH Accumulator connector type: small Tamiya Accumulator cells type: mini Accumulator capacitance: 1600 mAh Accumulator voltage: 8,4 V NOTICE! Batteries are covered only by starting warranty.
Battery charger for NI-MH / NI-CD batteries. It has a signaling LED, the red color means charging and the green color - battery is full.
A very intuitive and easy to use smartcharger by GFC Energy. Can be used to charge NiMH batteries. The charger is supplied with a cell count autodetection system.
GFC Energy LiPo smartchargerA very intuitive and easy to use smartcharger by GFC Energy, equipped with a built-in balancer. Can be used to charge both 7,4 V as well as 11,1 V LiPo batteries. The charger is supplied with an autodetection system allowing it to Automatically go into standby mode after the charging process is finished.CAUTION! The charger...
All the components to make a small Tamiya type plug.
o avoid an excessive cells discharging is advisable to use LiPo alarm. When dangerous limit voltage level per cell will be reached LiPo alarm gives sound. Model Number 2s 3s 4s voltage display, l, Measuring Range 0.5-3,6v, Accuracy Class +-0.01v, built-in buzzer alarm, function low voltage checker for airsoft lipo (Lithium), cell count 2-3-4s
Adapter for Li-Po batteries for electric pistols. Thanks to the use of this adapter, you can connect the battery to the professional chargers. It allows you to check all battery parameters while charging.
Set of 2.8x0.5 Flat Connectors [Female + Male]Two sets of flat connectors intended for installation in wiring or the motor of an AEG replica. The set includes 2 pairs of heat-shrink tubings.
Battery Wire Plug Converter Connect Battery with T-Shape (female) to Airsoft Electric Gun with Mini Type (male) Wire Cable
X-ASR is the world’s first 4th generation MOSFET protected against reverse polarity. It saves space, time and money because additional regular fuse is no longer needed. Acting as an electronic guard, X-ASR improves your AEG’s safety and durability through conformal coating and self-test with 2 LEDs. Although designed for up to M120 springs, in full auto...
PicoAAB is the smallest, 3rd generation mosfet with Active Brake. It can work with 14.8V Li-Poly batteries. The system can be installed in every AEG. It can work with the smallest ASG replicas.
Fuse - 1 pcs.- 25 amp. It rarely needs replacing, but this small part protects the motor from burning out in case of mechanical problems.
Adapter cable - large male - small female
Weight: 10 g Length: 34 mm Accumulator voltage: 3 V Diameter: 16 mm WARNING! Risk of fire and burns. Do not recharge, disassemble, heat above 100C or incinerate. Do not mix fresh batteries with used Lithium Batteries or other batteries types.