The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Hop-Up Chamber with ball illumination is an innovative addition to replicas that allows you to improve the precision of shots when playing in low light conditions. This advanced Hop-Up chamber was created to provide shooters with unparalleled accuracy and gameplay experience.
Our latest product, the Hop-Up Chamber with ball illumination, is a real revolution in the world of airsoft. Equipped with advanced technology, this Hop-Up Chamber is not only excellent at adjusting the ball's trajectory, but also has built-in lighting that gives it a unique look and functionality.
Hop-Up Chamber with ball illumination is an innovative addition to replicas that allows you to improve the precision of shots when playing in low light conditions. This advanced Hop-Up chamber was created to provide shooters with unparalleled accuracy and gameplay experience.
Our latest product, the Hop-Up Chamber with ball illumination, is a real revolution in the world of airsoft. Equipped with advanced technology, this Hop-Up Chamber is not only excellent at adjusting the ball's trajectory, but also has built-in lighting that gives it a unique look and functionality.
Main features:
1.Precise adjustment of the ball's trajectory: Thanks to the precise Hop-Up adjustment, you can adjust the trajectory of each ball to your needs. You will achieve excellent shot accuracy at various distances.
2.Ball illumination: The unique feature of this Hop-Up chamber is the built-in ball illumination. Thanks to this, visibility is excellent even in low light conditions. The balls are illuminated a moment before leaving the chamber, which allows for precise aiming even in the dark.
3.Durable construction: Made of high-quality materials, the Hop-Up chamber with backlight is extremely durable and resistant to extreme weather conditions.
To sum up: The Hop-Up chamber with ball illumination is not only a tool for improving the precision of shots, but also an element that will add a unique style to your replica. This allows you to achieve not only excellent accuracy, but also a unique experience during the game. Illuminate your path to victory and gain an advantage over your rivals thanks to our innovative Hop-Up Chamber with ball illumination.
This chamber illuminates the green and red balls.
The chamber comes with cables that allow it to be connected to the balancer socket in a li-po/li-ino battery. Power can be supplied from the replica's battery or from an additional battery located outside.
CM.097F - FB4066 - external battery (PEQ)
CM.518 - FB3519 - external battery (PEQ)
CM.097B - FB4008 - external battery (PEQ)
CM.513 - FB3513 - external battery (PEQ)
CM.007 - FB3350-1 - external battery (PEQ)
CM.612 - FB3561 - external battery (PEQ)
Weight: 80g
Material: aluminum
Color: grey
Assembly of the chamber requires experience and manual skills.
In many models, it may be necessary to adjust the replica or modify the wiring.
SHS Hop Up Chamber Set for airsoft G36 Series/SL8/SL9/UMP AEG, Original Hop Up Chamber. Upgrading AEG require necessary skill & technique
High quality professional HopUp rubber made of specially selected blend of silicone rubber. When correctly installed it will improve the tightness and BB's performance. Manufactured by Action Army company from Taiwan. Dedicated to Marui standard replicas: VSR-10, Hi-Capa, Glock, PX4, FN5-7, P226, Detonics, M1911, MEU, SOCOM and similar. Also fits WE GBB...
Guarder airsoft hop up bucking improve shooting accuracy, ballistic trajectory stability, air-tightness & firmness. Constructed of Silica Gel that is hard.
Hop-Up rubber made from silicon. It is designed for mechanism with spring from 130 m/s.
A complete hop-up chamber designed for replicas of the WELL series MB sniper rifles. The product is made almost entirely of metal. The exception is the plastic arm that presses the spacer and the hop-up rubber. Made of: metal + plastic Weight: 60g Colour: Black Producer: WELL
Metal Hop-Up chamber for AK series Made of: Metal Manufacturer: CYMA
Weight: 40 g Material: aluminum HIGH PERFORMANCED HOP-UP FOR M4/M16
PDI Repair kit for VSR-10 PDI Chamber The repair kit includes spare o-rings, screws and other small pieces that can be damaged or lost from the new PDI hop-up unit (for VSR-10 / G-Spec). The entirely new hop-up unit includes entirely new parts and so requires entirely new types of replacement components so here they are.
Hop-Up rubber made from silicon. It is designed for mechanism with spring up to 120 m/s.
The plastic made hop-up chamber is made by the JG company and is designed for the AUG replicas. The plastic make preserves the parameters whenever the chamber is used in low-temperatures.
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
G&G Green Hop Up Rubber (40 degree). The Hop-Up rubber was made of silicon thanks to which is keeps it properties even in low temperatures due to the fact that it does not get stiff just like in the case of regular rubber. It performs perfectly both in typical conditions as in negative temperatures – it keeps it properties even in the temperatures...
A hop-up rubber specially created for demanding shooters. Suitable for VSR-10 replicas and clones (VSR10,MB03 ...) for Marui, WE, KJW - 1911 gas pistols, Hi Capa, SIG, KP05, KP06 ... Thanks to its innovative design, it provides the perfect position of the bb before the shot, which guarantees perfect curling and repeatability of results. The specially...
Hop-Up Bucking for Tuned Replicas The Hop-Up bucking was made from silicon, which causes it to retain its quality in low temperatures, because it does not harden as is the case with ordinary rubber buckings. This model performs best in replicas with increased muzzle velocity.
Includes Bucking 70 Degrees Of Hardness For Marui Style AEG Barrels
Hop-Up Chamber with ball illumination is an innovative addition to replicas that allows you to improve the precision of shots when playing in low light conditions. This advanced Hop-Up chamber was created to provide shooters with unparalleled accuracy and gameplay experience.
Our latest product, the Hop-Up Chamber with ball illumination, is a real revolution in the world of airsoft. Equipped with advanced technology, this Hop-Up Chamber is not only excellent at adjusting the ball's trajectory, but also has built-in lighting that gives it a unique look and functionality.
![HOP-UP RUBBER 50A [BATTLEAXE]](https://airsoftguns.ie/12285-home_default/hop-up-rubber-50a-battleaxe-.jpg)
