The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
There are 26 products.
Active filters
Made from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight. Designed to attach directly to MOE Hand Guards or ACR masada, the Scout Mount allows the use of Surefire Scout Light Weaponlights and many 1913 Picatinny mounted lights. Models are available to position the light high at 11 o'clock (LEFT side...
QD swivel designed for fast attaching the sling.
"KeyMod" slots on sides & bottom allow for mounting rail segments to attach tactical accessories such as vertical grip, laser sights, flashlights, sling mounts, and bipods.
Weight: 180 g Material: aluminum Color: black Length: 172 mm
Scope, flashlight, Ø 0.25, High Mount Rings 20mm RIS. High Scope rings for attaching rifle scopes to sniper airsoft rifles & Aeg mount rails, Full metal construction. Please note!!! It may look a slightly different than on the picture!
Picatinny mounting rail for the KAR98K sniper rifle. It is mounted in the place of the factory rear sight, thanks to which we can use scopes and collimators mounted on ris rails. Weight: 60 g Material: aluminum Color: black
The MSA MOE/ACR Sling Attachment attaches directly to the airsoft MOE Hand Guard or masada, providing a forward sling attachment point for the Magpul MS2, MS3
Weight: 40 g Material: aluminum, steel Color: black
Light offset optimized for ergonomic activation, Total mounting solutions on a 4 sided rail system, Positions the light as close to the weapon as possible, For use with surefire M600 and M300 series scout light.
Element Low Pistol Flashlight Mount, Construction of Nylon Fiber Material , RIS Rail allow attachment of Flashlight & Laser Sight , e.g. STREAMLIGHT M3, SureFire X200, G&P M3.....etc
Aluminum end plate compatible with AEG AR15/M4 and SR25 replicas in the TM system. Features sling attachment points on both sides. Included 1 steel QD sling swivel. Weight: 40 g Material: aluminum, steel Color: black
- Fit 20mm Rail- Like the forward pistol grip, but leaves extra room on the rail to mount more items- Unmark version
Full metal 25mm low profile scope ring set. Install flashlight or scope onto any RIS 20mm weaver rail. Suitable for all flashlight or scope with 25mm diameter. Quick detachable design for fast installation or detachment.
CYMA M14 Full Metal Scope Mount Base Rail (C.40), Full alloy metal constructed. CLAW style bridge type scope mount, "See-Through" design allow use of iron sight even with mount installed, Install any red dot or scope onto this 20mm scope mount base
High-Profile Optics Mount 22mm A high-profile optics mount made of metal. This type of mount is a good solution for Micro type reflex sights. Weight: 30 g Length: 39 mm Height: 31 mm
Airsoft Accessory Series -- Profile Gas Block -- Suit for Marui M4 Series Outer Barrel -- Black Color Version
Design to install on Rear retractable stock of Marui AEG. Both left & right handed compatible. Look very good with bungee rifle sling. Steel metal adaptor. NOTE: Adaptor is designed for original AEGs stock pipe
Scope, flashlight, Ø 0.30, High Mount Rings 20mm RIS. High Scope rings for attaching rifle scopes to sniper airsoft rifles & Aeg mount rails, Full metal construction with thumb-screws for securing onto a top rail, Mounts to any 20mm rail.
AK Metal Scope/Reddot Mount Base Fits AK Series AEG's. Full metal side mounted AK scope rail It fits most AK47's and AK74's on the market, Fits as long as the AK AEG has a metal side rail mounting piece attached.
Aluminum construction removable carry handle. Adjustable sighting. Universal fit for all standard flat top receivers on M4/M16 AEG.
