The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Two-part 30mm optics mount for RIS rail (low)
Made entirely of metal. It consists of two rings of a diameter of 30mm, screwing in with the Allen screws. Universal mounting allows for easy attachment to each replica equipped with a standard 22mm RIS rail.
The inserts of cloth on the inner side of the rings protects the optics from being scratched. The set includes dedicated Allen key.
FEATURES:
Full metal 30mm low profile scope ring set.
Install flashlight or scope onto any RIS 20mm weaver rail.
Suitable for all flashlight or scope with 30mm diameter.
Quick detachable design for fast installation or detachment.
Flashlight/scope is secured by allen wrench (included).
DETAILS:
Color - Matte black
Weight - 62g (pair)
Ring width - 45mm
Overall height - 43mm
Elevation level - 6mm (bottom of ring to rail)
Ring diameter - 30mm
Mount base - 20mm
CYMA M14 Full Metal Scope Mount Base Rail (C.40), Full alloy metal constructed. CLAW style bridge type scope mount, "See-Through" design allow use of iron sight even with mount installed, Install any red dot or scope onto this 20mm scope mount base
Set include two RIS rails 98 mm long. Weight: 70 g Material: aluminum Length: 98 mm
Element Low Pistol Flashlight Mount, Construction of Nylon Fiber Material , RIS Rail allow attachment of Flashlight & Laser Sight , e.g. STREAMLIGHT M3, SureFire X200, G&P M3.....etc
QD swivel designed for fast attaching the sling.
High-Profile Optics Mount 22mm A high-profile optics mount made of metal. This type of mount is a good solution for Micro type reflex sights. Weight: 30 g Length: 39 mm Height: 31 mm
Picatinny mounting rail for the KAR98K sniper rifle. It is mounted in the place of the factory rear sight, thanks to which we can use scopes and collimators mounted on ris rails. Weight: 60 g Material: aluminum Color: black
Aluminum construction removable carry handle. Adjustable sighting. Universal fit for all standard flat top receivers on M4/M16 AEG.
Metal Constructed Killflash for ACOG scope. Easy to install with included elastic band. Protect your eyes blind from optical probe "OP" Flashlight (strong lighting). Able to protect the front lens of your ACOG scope.
Weight: 40 g Material: aluminum, steel Color: black
Weight: 180 g Material: aluminum Color: black Length: 172 mm
Scope Claw Mount for MP5/G3 and most HK Style clones. Scope mount has double Picatinny rails. Perfect for all varieties of scope, tactical flashlight, and laser. Weight: 150 g Material: aluminum Color: black Length: 133 mm
Scope, flashlight, Ø 0.30, High Mount Rings 20mm RIS. High Scope rings for attaching rifle scopes to sniper airsoft rifles & Aeg mount rails, Full metal construction with thumb-screws for securing onto a top rail, Mounts to any 20mm rail.
Airsoft Accessory Series -- Profile Gas Block -- Suit for Marui M4 Series Outer Barrel -- Black Color Version
Light offset optimized for ergonomic activation, Total mounting solutions on a 4 sided rail system, Positions the light as close to the weapon as possible, For use with surefire M600 and M300 series scout light.
Optics mount rail for M1903A3. Fits an S&T bolt-action rifle replica without any modification. Weight: 55 g Material: aluminum Color: black Length mm: 136
Full metal 25mm low profile scope ring set. Install flashlight or scope onto any RIS 20mm weaver rail. Suitable for all flashlight or scope with 25mm diameter. Quick detachable design for fast installation or detachment.
Two-part 30mm optics mount for RIS rail (low)
Made entirely of metal. It consists of two rings of a diameter of 30mm, screwing in with the Allen screws. Universal mounting allows for easy attachment to each replica equipped with a standard 22mm RIS rail.
The inserts of cloth on the inner side of the rings protects the optics from being scratched. The set includes dedicated Allen key.
