
Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
The MSA MOE/ACR Sling Attachment attaches directly to the airsoft MOE Hand Guard or masada, providing a forward sling attachment point for the Magpul MS2, MS3
The airsoft MSA MOE/ACR Sling Attachment attaches directly to the airsoft rifle MOE Hand Guard or masada, providing a forward sling attachment point for the Magpul MS2, MS3 slings and other clip-in sling systems. Like the RSA, the MSA is made of steel and is nitrocarburized for wear and corrosion resistance.
Weight: 180 g Material: aluminum Color: black Length: 172 mm
QD Sling Swivel, Full Metal Construction, Rugged Metal Sling Swivel for QD Sling Mount, A convenient way to install sling onto your rifle, Easy Hook Up, Install in just seconds
Set include two RIS rails 98 mm long. Weight: 70 g Material: aluminum Length: 98 mm
Scope, flashlight, Ø 0.25, High Mount Rings 20mm RIS. High Scope rings for attaching rifle scopes to sniper airsoft rifles & Aeg mount rails, Full metal construction. Please note!!! It may look a slightly different than on the picture!
Jing Gong Handguard Cap -- Metal Construction -- Handguard Cap (Round Type) -- For M4 / M16 Series Airsoft Rifle
Made from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight. Designed to attach directly to MOE Hand Guards or ACR masada, the Scout Mount allows the use of Surefire Scout Light Weaponlights and many 1913 Picatinny mounted lights. Models are available to position the light high at 11 o'clock (LEFT side...
fit to our halo, airosft EOTech - 551, 552, 553, 557, 556 other type can fit - This item not include the 551 scope shows in picutre - Color: Black
Full metal QD high scope mount base. For raising up the mount base level on any 20mm mount base. Increase the height of the flattop for easy aiming. Fit on any receiver or original rifle rail base. For all 20mm RIS weaver base.
Design to install on Rear retractable stock of Marui AEG. Both left & right handed compatible. Look very good with bungee rifle sling. Steel metal adaptor. NOTE: Adaptor is designed for original AEGs stock pipe
- Fit 20mm Rail- Like the forward pistol grip, but leaves extra room on the rail to mount more items- Unmark version
High-Profile Optics Mount 22mm A high-profile optics mount made of metal. This type of mount is a good solution for Micro type reflex sights. Weight: 30 g Length: 39 mm Height: 31 mm
Picatinny mounting rail for the KAR98K sniper rifle. It is mounted in the place of the factory rear sight, thanks to which we can use scopes and collimators mounted on ris rails. Weight: 60 g Material: aluminum Color: black
QUICK RELEASE QD SLING SWIVEL - NOT INCLUDED
Designed to attach directly to airsoft MOE Hand Guards or ACR masada, the Scout Mount allows the use of Surefire Scout Light Weaponlights.
"KeyMod" slots on sides & bottom allow for mounting rail segments to attach tactical accessories such as vertical grip, laser sights, flashlights, sling mounts, and bipods.
Two-part 30mm optics mount for RIS rail (low) Made entirely of metal. It consists of two rings of a diameter of 30mm, screwing in with the Allen screws. Universal mounting allows for easy attachment to each replica equipped with a standard 22mm RIS rail. The inserts of cloth on the inner side of the rings protects the optics from being scratched. The set...
The MSA MOE/ACR Sling Attachment attaches directly to the airsoft MOE Hand Guard or masada, providing a forward sling attachment point for the Magpul MS2, MS3