The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
G36 Replica Pin Steel assembly pin for G36 replicas.
A set of mounting pins for the MP5 replica's body. Manufacturer: CYMA Weight: 2g Material: aluminum Number of pieces in the set: 2 Length mm: 29 Diameter mm: 6/8.4 Gun model: MP5
The pin is designed for the body of the G36 type replicas.
Magazine Valve Key - Model:PA 0401- Gross Weight:90g- Constructed with Steel Material- Suitable For Marui/ WA/ KSC/ Maruzen Gas Charging Valve- Use for disassemble magazine value of gas blowback pistol/rifle Magazine valve key made of metal. Design in such way that this one key will fit the divergent valve standard's.
Suitable for M4/M16 Series Airsoft Electric Gun AEG RifleSteel Bolt Catch Release Steel Construction Design for Replace The Original Bolt Catch Release
Enhanced safety lever allowing rifle safety engagement and disengagement with your index finger for right-handed operator and thumb finger for left-handed operator Weight: 30 g Material: steel Color: black
SHS Airsoft AEG Upgrade Part Series -- Gearbox Spring for Version 3
The catch is ambidextrous so can be installed for either left or right handed shooters, is made of sterner materials than some stock mag catches and has a strong but purposeful feedback to the action. Making sure you have replacement parts on hand can avoid tactical blunders in the field so don't hesitate to get supply of replacement parts, especially...
Airsoft Barrel Nut Wrench - Model: EX 331 - Weight: 95g - Gross Weight:110g - Made by Element - For DD Lite/RIS II M4A1/MK18/Omega X Series/PWS Diablo Rail/MK110/MK112/MK114/MK116
High-quality silver-plated, low resistance wire in transparent silicone insulation. Designed for AEG replicas, its installation is highly recommended in tuned models. Resistant to high voltage and temperature ROHS certificate
PDI Repair kit for VSR-10 PDI Chamber The repair kit includes spare o-rings, screws and other small pieces that can be damaged or lost from the new PDI hop-up unit (for VSR-10 / G-Spec). The entirely new hop-up unit includes entirely new parts and so requires entirely new types of replacement components so here they are.
A complete safety selector lever, dedicated to the Cyma M4 / M16 replica. The selector fits all Cyma M4 replicas, no matter what the body material is. However, attention should be paid to the diameters of the opening on the right side of the body. The diameter of the blanking piece supplied with the kit is 8.35 / 10.42 mm. It is a complete kit. CAUTION!...
Plastic body for JG AUG type replicas - black Dedicated for: AUG JG replicas Material: polymer Weight: 585 Color: black Manufacturer: JG
SHS 2nd Sear. Steel construction. Essential part for upgrading your Airsoft Sniper. This reinforced 2nd sear design for supporting high power upgrades.
M-147 Bottom Receiver for M4/M16 Replicas A lightweight, made entirely of polymer bottom receiver for AR15 family of replicas. The set includes a fire mode selector. Purpose: M4 / M16 replicas Material: Polymer Weight: 105 g Color: Black Manufacturer: Golden Eagle
Cocking handle's spring for the M series
![MP5 PIN SET [CYMA]](https://airsoftguns.ie/18832-home_default/mp5-pin-set-cyma-.jpg)
![AEG AR-15/M4 AMBIDEXTROUS MAGAZINE RELEASE - BLACK [CYMA]](https://airsoftguns.ie/18077-home_default/aeg-ar-15m4-ambidextrous-magazine-release-black-cyma-.jpg)
