The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
The latest version of the popular CYMA AEP electric pistols.
However, this time, despite the unchanged appearance, we have an absolute novelty inside.
The replica has a MOSFET system, detachable Li-Po battery, low-resistance waring and the gearbox itself has steel ball bearings and the plastic parts are made of blue, durable polymer.
Durable steel gears ensure trouble-free operation of the mechanism.
Thanks to these treatments we have an extremely durable and fast pistol. The replica will surprise every user with a quick reaction to the trigger and a high capacity battery.
CM.123S due to construction slide is stationary.
Gun is made of ABS, has a auto or single fire.
Pistol featured with a regulated hop up system.
The latest version of the popular CYMA AEP electric pistols.
However, this time, despite the unchanged appearance, we have an absolute novelty inside.
The replica has a MOSFET system, detachable Li-Po battery, low-resistance waring and the gearbox itself has steel ball bearings and the plastic parts are made of blue, durable polymer.
Durable steel gears ensure trouble-free operation of the mechanism.
Thanks to these treatments we have an extremely durable and fast pistol. The replica will surprise every user with a quick reaction to the trigger and a high capacity battery.
CM.123S due to construction slide is stationary.
Gun is made of ABS, has a auto or single fire.
Pistol featured with a regulated hop up system.
Selection of fire is possible after moving the safety selector lever.
Weight: 830 g
Color: black
Material: ABS
Fire mode: auto, single
Magazine material: metal
Bearings type: steel ball-bearing
Warranty period: 1 month
Hop up: adjustable
Serial number: YES
Length: 230 mm
Magazine capacity: 30 BBs
Accumulator capacitance mAh: 550
Length of internal barrel: 105 mm
Muzzle energy: 0.37 J
Muzzle velocity fps: 200
Number of magazines in set pcs.: 1
NOTE! before first use, recharge the battery using included in the set charger.
To charge the battery, use the supplied charger or charger dedicated to Li-Po batteries, setting the charging current not bigger than 0.7A.
Remember not to completely discharge the battery, it may damage it and is not covered by the warranty.
NOTICE! Replica have a unique serial number!
Every replica pass initial check up. It`s being checked and overshooted on XCORTECH X3200 chronograph
Weight: 100 g Color: black Length: 165 mm Material: metal Magazine model: low-cap Magazine capacity: 30 BBs Manufacturer: CYMA
Suitable for CM121 Desert Eagle Series AEP AEG Pistol. Suitable for 6mm Plastic Bullet BB. Weight - Approx 130g
CYMA M9 (CM126)- Great Airsoft Electric Pistol - Primary CQB weapon- Include Battery & Charger
NOTICE! - Batteries are covered only by starting warranty. - Guns not included.
The latest version of the popular CYMA AEP electric pistols. However, this time, despite the unchanged appearance, we have an absolute novelty inside. The replica has a MOSFET system, detachable Li-Po battery, low-resistance waring and the gearbox itself has steel ball bearings and the plastic parts are made of blue, durable polymer. Durable steel gears...
Electric Pistol Great Starter Sidearm Fully Automatic Mode A non-blowback Airsoft 6mm BB Electric Pistol which is based upon some of the World's most popular pistols, with all of the best bits taken and combined to create one unique pistol which is highly ergonomic.
The long-awaited Li-Po battery dedicated to electric pistols. Its significantly improves the response to trigger pull -replica comes alive! The battery fits without any modifications in the replica, its charging is detached using chargers for Li-Po batteries. For charging, use only chargers dedicated for li-po batteries. The battery is connected to the...
Enlarged magazine for the Cyma 132S/126 electric pistol, holds 80 bb's.
Microprocessor charger for small capacity batteries, for AEP pistol replicas. The charger is plugged into a USB, so we can charge our battery using many devices or even a power bank. After the battery is charged, the loading process will automatically stop. Thus, the battery is protected against damage. The charging process is signaled by LEDs. NOTICE!...
The long-awaited Li-Po battery dedicated to electric pistols equipped with a small Deans connector. For charging, use only chargers dedicated for li-po batteries. The battery is connected to the charger through the balancer port. Suitable for replicas such as CM 121.CM122, CM123, CM125, CM126, CM127, CM128 and similar equipped with a small Deans...
The latest version of the popular CYMA AEP electric pistols. The replica has a MOSFET system (battery and switch protection), detachable Li-Po battery, upgraded gearbox with steel bearings and low-resistance wiring. Durable steel gears ensure trouble-free operation of the mechanism. Thanks to these upgrades we got an extremely durable pistol with a quick...
CM.128 is a selective-fire (semi-auto) electric non-blowback pistol. Fire-control selector switch in the form of the Safety Lever. Frame and slide made of polymer. Pistol featured with a hop up system.
Weight: 100 g Color: black Material: metal Magazine model: low-cap Manufacturer: CYMA
Enlarged magazine for the Cyma 132S/126 electric pistol, holds 80 bb's.
Weight: 120 g Magazine model: low-cap Magazine material: metal Magazine capacity: 30 BBs Manufacturer: CYMA
Set included: * replica with silencer (1 month warranty) * hi-cap magazine * battery 7,2V, 500 mAh with starting warranty * charger with starting warranty
The latest version of the popular CYMA AEP electric pistols.
However, this time, despite the unchanged appearance, we have an absolute novelty inside.
The replica has a MOSFET system, detachable Li-Po battery, low-resistance waring and the gearbox itself has steel ball bearings and the plastic parts are made of blue, durable polymer.
Durable steel gears ensure trouble-free operation of the mechanism.
Thanks to these treatments we have an extremely durable and fast pistol. The replica will surprise every user with a quick reaction to the trigger and a high capacity battery.
CM.123S due to construction slide is stationary.
Gun is made of ABS, has a auto or single fire.
Pistol featured with a regulated hop up system.
![CYMA HI-CAPA 5.1CM.128 [CYMA]](https://airsoftguns.ie/11579-home_default/cyma-hi-capa-51cm128-cyma-.jpg)
![CM.125 MAGAZINE 30RD [CYMA]](https://airsoftguns.ie/18005-home_default/cm125-magazine-30rd-cyma-.jpg)
![MAC 11 JG0452 [WORKS J.G.]...](https://airsoftguns.ie/10692-home_default/mac-11-jg0452-works-jg-smg-airsoft.jpg)