Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 108 products.
Active filters
Quick and easy to use charger with balancer. After connection to power one of three LED s will flask. When charging is completed the one of three LED s will light constant. NOTICE! -Charges are covered only by starting warranty. - Can be yellow or blue (pictures)
Accumulator type: NiMH Accumulator voltage: 9.6 V Accumulator capacitance: 1600 mA Accumulator connector type: small Tamiya
Multiprocessor Charger with a Balancer Material: Metal + Polymer Weight: 530g Measurements: 135x145x35mm Manufacturer: Electro River™ NOTICE! Charges are covered only by starting warranty.
Battery Wire Plug Converter- Battery wire plug converter about 125mm long.
Weight: 5 g code IP ALARM
Easy to use NiMH battery charger.The charger uses 110-240V AC main power.Charges NiMH, NiCd batteries with up to 2A charge current.For 7,2V, 8,4V and 9,6V batteries. High quality, safe and durable.Tamiya Large plug. With led indicators. NOTICE! Charges are covered only by starting warranty.
Accumulator connector type: small Tamiya Accumulator cells type: lithium Accumulator capacitance: 2200 mAh Length: 105 mm Width: 20 mm Accumulator voltage: 11.1 V Height: 10 mm
New technologies have been used in the Ni-MH batteries, thanks to which we have managed to achieve high efficiency and high voltages. Ni-MH batteries belong to groups of batteries, which have a huge energy density, therefore, with the same volume have a greater capacity than batteries made in older technologies. The packet made of Ni-MH cells is ideally...
NanoAAB is the latest, 3rd generation MOSFET with active brake. The application of the most up-to-date transistors and microprocessor enabled us to create the smallest and the most reliable MOSFET with active brake in the market. Thanks to its special coating, it is resistant to atmospheric conditions.
PicoSSR 3 is a new, more powerful version of the world's smallest mosfet - PicoSSR 2. Its dimensions are merely 4x6x21 mm.
Name LiPo 7,4V 950mAh 20/50C Cell Type LiPo Battery Capacity [mAh] 950 Battery Voltage [V] 7,4 Plug Type Tamiya Battery size [mm] 13x25x70 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
The long-awaited Li-Po battery dedicated to electric pistols. Its significantly improves the response to trigger pull -replica comes alive! The battery fits without any modifications in the replica, its charging is detached using chargers for Li-Po batteries. For charging, use only chargers dedicated for li-po batteries. The battery is connected to the...
Adapter cable - large male - small female
AEG Heatshrinks set contains 21 heatshrink tubes, all 9 cm [3,5 inch] long.
Cell Type LiPo Battery Capacity [mAh] 2000 Battery Voltage [V] 7,4 Plug Type DEAN Battery size [mm] 10x21x126 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
Low-resistance cable length of 2 m [IPower]
It has 8 functions. Thanks to its special coating, it is resistant to atmospheric conditions (Military Specification MIL-V-173C). Battery protection supports: Li-Po 7.4V / 11.1V / 14.8V. You can also disable the protection and use other batteries.
NanoASR is the latest standard third generation MOSFET. The application of the most up-to-date transistors and microprocessor enabled us to create the smallest and most reliable MOSFET in the market. Thanks to its special coating, it is resistant to atmospheric conditions.
Name LiPo 7,4V 2200mAh 20/40C Cell Type LiPo Battery Capacity [mAh] 2200 Battery Voltage [V] 7,4 Plug Type DEAN Battery size [mm] 15x35x103 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
TITAN V2 Basic Module - the best if you long for having TITAN in two or more airsoft guns. Then you do not need the second USB-Link from the Advanced or Complete set. It includes TITAN with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require...