The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
TITAN V2 Basic Module - the best if you long for having TITAN in two or more airsoft guns. Then you do not need the second USB-Link from the Advanced or Complete set. It includes TITAN with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require highest quality. If you decide to have more functions, there is always option to upgrade firmware from BASIC to ADVANCED.
NOTICE! In order to configure TITAN, you need the USB-Link or Tactical Programming Card which is not included in this kit.
TITAN V2™ is an AEG Control System for V2 gearboxes which will transform your AEG into an advanced training weapon. Adjust your AEG using USB-Link and GATE Control Station app for PC and Android devices. Gain a tactical advantage thanks to the extremely fast trigger response, option of adjusting trigger sensitivity to your preferences and many other useful functions. Give your AEG a new lease of life!
Thanks to the optical sensors we have eliminated the problem of faulty switches that can occur in competitors' drop-in mosfets. The trigger has no mechanical connections with the PCB. This eliminates mechanical stresses and provides for high reliability.
It has 8 functions. Thanks to its special coating, it is resistant to atmospheric conditions (Military Specification MIL-V-173C). Battery protection supports: Li-Po 7.4V / 11.1V / 14.8V. You can also disable the protection and use other batteries.
The USB-Link is used for connecting GATE TITAN and ASTER with PC, Mac or Android devices. Kit contents: USB-Link for GCS app USB-C cable [0.6 m / 1 ft 11 in] Micro-USB cable [0.6 m / 1 ft 11 in] 'Troubleshooting' Card Quickstart Guide
Battery Wire Plug Converter Connect Battery with T-Shape (female) to Airsoft Electric Gun with Mini Type (male) Wire Cable
Fuse - 1 pcs.- 25 amp. It rarely needs replacing, but this small part protects the motor from burning out in case of mechanical problems.
TITAN V3™ Advanced Set - at once you purchase all you need to take total advantage from TITAN. It includes TITAN with ADVANCED firmware edition. The ADVANCED firmware edition offers wide variety of functions and is dedicated for those who like complex solutions. It enables access to the Statistics and TITAN World Rankings. To learn all the differences...
All the components to make a small Tamiya type plug.
Plug and socket set. Large contact surface. Heat resistant polymer. Held in place with spring tension.
Battery meter works with a voltage from 3.7V to 22.2V, LiPo Battery Meter LCD 1S-6S,2s-6s, The electronic system supporting the control and diagnostics package Li-Po/Li-Fe/Li-ion.
Weight: 5 g code IP ALARM
High-quality silver-plated, low resistance wire in transparent silicone insulation. Designed for AEG replicas, its installation is highly recommended in tuned models. Resistant to high voltage and temperature ROHS certificate
PicoAAB is the smallest, 3rd generation mosfet with Active Brake. It can work with 14.8V Li-Poly batteries. The system can be installed in every AEG. It can work with the smallest ASG replicas.
NanoAAB is the latest, 3rd generation MOSFET with active brake. The application of the most up-to-date transistors and microprocessor enabled us to create the smallest and the most reliable MOSFET with active brake in the market. Thanks to its special coating, it is resistant to atmospheric conditions.
Components to make a large male Tamiya plug.
Fuse - 1 pcs.- 25 amp. It rarely needs replacing, but this small part protects the motor from burning out in case of mechanical problems.
Model Number 8s voltage display, Display Type Analog and Digital, Measuring Range 0.5-4.5v, Accuracy Class +-0.01v, built-in buzzer alarm, function low voltage checker for airsoft lipo (Lithium), cell count 2-8s
TITAN V2 Basic Module - the best if you long for having TITAN in two or more airsoft guns. Then you do not need the second USB-Link from the Advanced or Complete set. It includes TITAN with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require highest quality. If you decide to have more functions, there is always option to upgrade firmware from BASIC to ADVANCED.
NOTICE! In order to configure TITAN, you need the USB-Link or Tactical Programming Card which is not included in this kit.
