The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Multiprocessor Wave™ Charger
Electro River™ - We give life to your devices
Electro River™ is a new quality on the power supply market. The manufacturer has set for himself a goal to create a product whose quality will match even the best players on the market of batteries whilst at the same time retaining an attractive price. Electro River™ attempts to meet the needs of players. The brand’s offer includes efficient LiPo packs in many types and sizes, microprocessor chargers and accessories.
Each river starts its course from a source. Exactly the same as the Electro River battery, which will not be able to operate efficiently without the powering source that is the charger. A new, multi-functional Wave™ microprocessor charger will allow for efficient charging/discharging of all types of cells available on the market, offering a wide array of configuration of work modes and maximum safety for the battery and the user. The charger has an in-built power supply and a balancer and is characteristic for its very intuitive operation.
Charger Specification:
Input Voltage: 11-18V (DC) / 100-240V (AC)
Charging Voltage: 0.1-6,0A
Max Charging Rate: 80W
Discharge Voltage: 0.1-2.0A
Max Discharging Rate: 10W
Balancing Current: max. 300 mAh/cell
Applicable Battery Types: Ni-MH/Ni-Cd: 1-15 cells /LiPo/LiFe/LiIon: 1-6 cells
Pb Battery Voltage: 2-20V
The set includes:
- charger
- power cable
- 12V DC (Jack) power cable
- set of DEAN/Tamiya small, DEAN/clips
- manual
High Quality Army Paint Spray Quick dry 400 ml.For use on weapons, vehicles, textiles, toolsEasy removable from most of surfaces PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
It is a stock piston and piston head form CYMA, but it has been equipped with 15 steel teeth. Teeth are made of steel, which significantly contributes to the greater strength of the piston. Manufacturer: CYMA Weight: 30 g Material: ABS, steel CAUTION! Depending on the delivery, the piston may differ in color - there is no possibility of choosing a color....
Cell Type LiPo Battery Capacity [mAh] 2000 Battery Voltage [V] 7,4 Plug Type DEAN Battery size [mm] 10x21x126 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
A very powerful non-blowback airsoft pistol optimal for skirmishing. Shoot as fast as you can full the trigger.
An universal multi-position stock for the AK type replicas is based on the M4 type replicas stock. The stock’s pipe is made of metal ( ZnAl ) and the tactical sling attachment point whiles as, on the other hand, the stock’s body is made of durable plastic. The stock’s foot is equipped with a porous surface thanks to which it is very stable. Dedicated to...
Weight: 70 g Accumulator type: metal Accumulator connector type: T-connerctor Accumulator cells type: lithium Accumulator capacitance: 1200 mAh Length: 175 mm Width: 14 mm Accumulator voltage: 11.1 V Height: 15 mm
High-quality knife with unique military design and the 101st Airborne logo imprinted. Cool look due carbon print & wood finished handle. Equipped with stainless steel gray coated knife blade and folding protection. The knife also has an integrated gut hook to cut ropes / wires and belts. Perfect for travel, outdoor activities and everyday use....
The sniper rifle replica is made of metal and high quality plastic. The metal made elements are as follows: the minor elements and also the barrel, the bolt carrier, the cocking handle, the RIS rail and the trigger. Scope and bipod NOT INCLUDED. Please Choice separately from list below
Made by low carbon steel wire material. Offer well protection and cool look. Ballistic Protection: Approx. 500 FPS with 6mm 0.20g BB. Adjustable elastic strap. Suggested to use with goggle for best protection. Perfect for airsoft
Utility backpack made by high density Nylon material, 1" molle webbing throughout the backpack, Removable sternum strap, Adjustable shoulder, chest and waist strap, Hydration system drink tube exit hole on top of the backpack,
Made of metal Mid-Cap style magazine with a capacity of 180 rounds for M14 series replicas fit for CYMA
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Accumulator connector type: T-connerctor Accumulator cells type: lithium Accumulator capacitance: 2200 mAh Length: 105 mm Width: 20 mm Accumulator voltage: 11.1 V Height: 10 mm
ASG replica shooting target, equipped with a BB trap and replaceable targets.- mesh BB trap stops the BBs and prevents ricochets- 5 interchangeable paper targets included- two stamps with silhouette and spot pattern for self-made targetsTechnical data:- BB trap size: 190 x 260 x 280 mm- Target size: 180 x 200 mm- Weight: 300 g HFC or ASG - depending from...
ASTER Module - It includes ASTER with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require highest quality. If you decide to have more functions, there is always an option to upgrade firmware from BASIC to ADVANCED or EXPERT. Kit contents: ASTER...
Easy to use NiMH battery charger.The charger uses 110-240V AC main power.Charges NiMH, NiCd batteries with up to 2A charge current.For 7,2V, 8,4V and 9,6V batteries. High quality, safe and durable.Tamiya Large plug. With led indicators. NOTICE! Charges are covered only by starting warranty.
