The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Easy to use NiMH battery charger.
The charger uses 110-240V AC main power.
Charges NiMH, NiCd batteries with up to 2A charge current.
For 7,2V, 8,4V and 9,6V batteries.
High quality, safe and durable.
Tamiya Large plug.
With led indicators.
NOTICE! Charges are covered only by starting warranty.
Easy to use NiMH battery charger.
The charger uses 110-240V AC main power.
Charges NiMH, NiCd batteries with up to 2A charge current.
For 7,2V, 8,4V and 9,6V batteries.
High quality, safe and durable.
Tamiya Large plug.
With led indicators.
Magazine is powered by battery 6F22 , which are located inside of magazine (battery not included!). Magazine has a 2 mode AUTO (non-stop spring clocking) and Sound Control (clocking spring while gearbox is running). Weight: 390 g Magazine model: hi-cap Material: polymer Color: black Diameter mm: 200 Magazine capacity BBs: 3500 Gun Model: AK47 / AKM /...
CYMA 150rd Standard Magazine for AK AEG (C.71)
Weight: 720 g Material: plastic, aluminum
- PPS Aluminum Outer Barrel Silencer Adapter For WE pistol +11mm CW to -14mm CCW - Suitable for WE M9, Hi-Capa, G-series and other compatible brands (+11mm CW). - Also suitable for BELL / KSC M9 series pistol (+11mm CW). - Convert to +11mm CW to -14mm CCW. - Made out of Aluminum. - Super rigid construction. - Weight - Approx 16g - Original Packing -...
042 is a replica of a German machine gun (Maschinengewehr 42). The whole structure of metal (flash hider, barrel, barrel change flap, weapon receiver, grip, trigger, receiver cover, front sight and rear sight) mainly ZnAl. From steel is a bipod, barrel change latch, cocking slide, cocking handle, feed tray with cartridge stop and rear anti-aircraft sight....
JG070 is replica of most popular SMG's on world - MP5. Original firearm is commonly used by special forces like: SAS, GROM, Navy SEALs, GSG9 and many more.
The latest version of the popular CYMA AEP electric pistols. The replica has a MOSFET system (battery and switch protection), detachable Li-Po battery, upgraded gearbox with steel bearings and low-resistance wiring. Durable steel gears ensure trouble-free operation of the mechanism. Thanks to these upgrades we got an extremely durable pistol with a quick...
Spring powered replica of Walther P99 pistol. Has original manufacturer's markings on slide and grip. Frame, slide, barrel, magazine and grip are made of high quality ABS composite. Made of metal are: trigger, magazine release button and safety lever. The replica is equipped with fixed HopUp system, which significantly improves the accuracy and range of...
Electric Pistol Great Starter Sidearm Fully Automatic Mode A non-blowback Airsoft 6mm BB Electric Pistol which is based upon some of the World's most popular pistols, with all of the best bits taken and combined to create one unique pistol which is highly ergonomic.
Polymer construction of hi-cap magazine for 450 BB's is very solid, light and durable. This magazine is compatible with the M4 serie replica from brand like CYMA, APS, Dboys, JG, Arcturus, A&K, it's also compatible with AEG in Tokyo Marui standard. Hi-cap magazines should be prepared in particular way before first usage. Steps that must be made: ·...
Weight: 190 g Accumulator type: NiMH Accumulator connector type: small Tamiya Accumulator cells type: mini Accumulator capacitance: 1600 mAh Length: 120 mm Width: 20 mm Accumulator voltage: 9,6 V Height: 20 mm NOTICE! Batteries are covered only by starting warranty.
DESCRIPTION New series of PROSLICK BB thanks to high precision and smoothness designed for precision barrels. 0.36g recommended for reinforced replicas 130 m /s and more. The color of the bb may differ from the one presented in the pictorial picture. It is not possible to choose a color - it does not depend on us.
Professional quick-drying paint to mask, airosft weapons, vehicles and parts repairs.- Container: 400ml, Color: Vietnam green PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
A scope by Theta Optics™ 3-9*40 EG Scope is a guarantee of high quality and reasonable price. Enclosed in a durable, metal casing, vivid optics with a Mil-Dot reticle as well as a fixed magnification. The reticle can be smoothly adjusted both vertically and horizontally. The product is attached on a standard RIS 22 mm rail. Features an adjustable...
A vest made on nylon mesh. Features belts, three on each side, that are used for size adjustment. On the back, there are three 50 mm wide belts. The vest can be divided into two parts and has a zipper closure. On the right flap, there are three single pouches for STANAG magazines and a handy pocket with a hook and loop fastener for the attachment of...
Modular ballistic vest modeled on the AAV vest from the FSBE gear used by reconnaissance units of the USMC. Used in the conditions of urban activities as well as in the field.
Easy to use NiMH battery charger.
The charger uses 110-240V AC main power.
Charges NiMH, NiCd batteries with up to 2A charge current.
For 7,2V, 8,4V and 9,6V batteries.
High quality, safe and durable.
Tamiya Large plug.
With led indicators.
NOTICE! Charges are covered only by starting warranty.
