CO2 12G CAPSULE

Reference: MOS-35-000766, 14798, CO2-12M

CO2 12G CAPSULE

Standard CO2 12g capsule for CO2 gas replika. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
€1.00
More CO2 12G CAPSULE
In stock
Suitable for precision barrels, BIODEGRADABLE  AIRSOFT BB

Reference: ROC-16-011618

0,23G BIO PRECISION BB Green - 4350RD

Diameter 5.95mm +/- 0.01mm. Highest Quality which affects effective accuracy, good shot grouping, long range and minimal jamming. Suitable for 6.01mm precision barrels Rockets Professional BIO 0,23g BBs. Long-awaited, high quality, precision Rockets BBs. Thanks to a special manufacturing process, Rockets are characteristic for their very tight cone of...
€12.95
More 0,23G BIO PRECISION BB Green - 4350RD
In stock
MICROPROCESSOR CHARGER FOR BATTERIES NIMH/NICD - 8.4/9.6V MICROPROCESSOR CHARGER FOR BATTERIES NIMH/NICD - 8.4/9.6V

Reference: VB1501000

MICROPROCESSOR CHARGER FOR BATTERIES NIMH/NICD - 8.4/9.6V

Battery charger for NI-MH / NI-CD batteries - 8.4/9.6V. This microprocessor charger automatically disconnects after charged the battery, completing the charging process, signaling the -green LED- battery charged. It has a signaling LED, the red color means charging and the green color - battery is full. Thanks, microprocessors charging is fast and the...
€16.95
More MICROPROCESSOR CHARGER FOR BATTERIES NIMH/NICD - 8.4/9.6V
In stock
All best sellers
  • Banner

    Banner left 1
  • Out-of-Stock
Gate PicoSSR 3 MOSFET for AEG
  • Gate PicoSSR 3 MOSFET for AEG
  • Gate PicoSSR 3 MOSFET for AEG
  • Gate PicoSSR 3 MOSFET for AEG

Gate PicoSSR 3 MOSFET for AEG

PICOSSR3

PicoSSR 3 is a new, more powerful version of the world's smallest mosfet - PicoSSR 2
Its dimensions are merely 4x6x21 mm.

€13.17
Tax included
Quantity
Out-of-Stock

Description

PicoSSR 3 is very powerful it has better electrical and mechanical parameters that its predecessor. Additionally, it is fully resistant to water immersion. It can work with the smallest AEG replicas.
Maximum battery rated voltage is 12.8 V.

Key functions

 

mosfet

MOSFET

Do you want to achieve a higher rate of fire and faster trigger response? Are you planning a power upgrade of your rifle? In that case, you need a MOSFET.

It targets the energy from the battery directly to the motor, bypassing the mechanical trigger contacts. As a result, you will gain higher rate of fire of the rifle and a faster trigger response, and the contacts will be protected against burn out.

 

 

The kit includes:

  • 2 x single signal wire for trigger contacts, each 60cm long
  • 3 x heat shrink tube

Product Details
PICOSSR3
4 other products in the same category:
PLATELET FUSE 25A PLATELET FUSE 25A

Reference: V20-0499

PLATELET FUSE 25A

Fuse - 1 pcs.- 25 amp. It rarely needs replacing, but this small part protects the motor from burning out in case of mechanical problems. 
€0.65
More PLATELET FUSE 25A
In stock
Gate TITAN v2 Basic Module MOSFET Complete Set Front Wired Gate TITAN v2 Basic Module MOSFET Complete Set Front Wired

Reference: TTN2-BMF

Gate TITAN v2 Basic Module Front MOSFET

TITAN V2 Basic Module - the best if you long for having TITAN in two or more airsoft guns. Then you do not need the second USB-Link from the Advanced or Complete set. It includes TITAN with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require...
€82.95
More Gate TITAN v2 Basic Module Front MOSFET
In stock
Out-of-Stock Motor Connectors - Set of 2.8x0.5 Flat Connectors [Female + Male] Motor Connectors - Set of 2.8x0.5 Flat Connectors [Female + Male]

Reference: GAT-08-029134

Brand: ARMA TECH

Motor Connectors - Set of 2.8x0.5 Flat Connectors [Female + Male]

Set of 2.8x0.5 Flat Connectors [Female + Male]Two sets of flat connectors intended for installation in wiring or the motor of an AEG replica. The set includes 2 pairs of heat-shrink tubings.
€2.95
More Motor Connectors - Set of 2.8x0.5 Flat Connectors [Female + Male]
Out-of-Stock

Follow us on Facebook