The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
| Cell Type |
LiPo
|
|
Battery Capacity [mAh] |
2000
|
| Battery Voltage [V] |
7,4
|
| Plug Type |
DEAN
|
| Battery size [mm] |
10x21x126
|
| Number of Cells |
2
|
NOTICE! Batteries are covered only by starting warranty.
Electro River™ is a new quality on the LiPo battery pack market. The manufacturer has set for himself a goal to create a product whose quality will match even the best players on the market of batteries whilst at the same time retaining an attractive price. The offer includes high capacity packs designed with limited space replicas in mind - new packs are similar to a lighter in size!
High quality wiring and connectors guarantee maximum exploitation of the energy potential of the battery by minimizing losses during energy transfer. Such a solution also prevents overheating of the contacts Every cell has a Nanosafe® safeguard in order to minimize the risk of potential fire of the pack as a result of damage.
Due to Subzero Power® technology, the low temperature efficiency has been increased. Even in temperatures below zero the level of self-discharge is very low. High quality craftsmanship of each cell and other elements provides minimal internal resistance and voltage durability under stress. The abovementioned features have allowed to achieve up to 20% more charging cycles than in other Li-Po batteries! This makes Electro River™ products a very attractive offer both for beginners and advance LiPo battery users.
Lithium-Ion-Polymer (LiPo) packs are successors to the known Lithium-Ion (LiIon) packs. The basic advantage of LiPo is undoubtedly the ratio of capacity to size. The packs are of very small size whilst maintaining a very large electric efficiency, which allows for choosing an appropriate pack for practically every AEG replica. Do not feature memory effect. Can be charged very frequently, without the need to be fully discharged. Frequent charging is beneficial for every type of a battery.
It is crucial to remember not to discharge a LiPo pack to a level of less than 3V per cell and not to overcharge over 4,2V per cell. Another advantage of LiPo packs is a small percentage rate of self-discharge. Unused pack will lose approximately 3-5% of energy per month. It is important to pay attention to an unused pack as there is a risk that as a result of not being used over a prolonged period of time it can be discharged beneath the acceptable minimal value (3V per cell) and inadvertent chemical reactions may occur, which lead to a deterioration of the pack’s properties including a permanent damage and, in extreme cases, fire. Unused LiPo pack should be charged to an average of 70%.
Properly used, a LiPo pack has a exploitation period of on average 500-700 cycles. An important factor is the temperature thatLiPo packs can work in. In contrast to other batteries, LiPo cells perform well in low temperatures. However, they should be charged in room temperature. In order to maintain the good condition of LiPo batteries it is required to balance them during charging with a service connector, which most LiPo packs have (a good LiPo charger features an in-built balancer).
Double Seal Purpose: M4 Replicas Material: Aluminium Length: 21,4mm Manufacturer: Super Shooter/SHS
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
ASTER Module - It includes ASTER with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require highest quality. If you decide to have more functions, there is always an option to upgrade firmware from BASIC to ADVANCED or EXPERT. Kit contents: ASTER...
The legendary E&L brand, whose excellent replicas of Russian assault rifles (to name just them!) have won the hearts of airsoft players from around the world, returns with the E&L Essential series. Replicas from this series are less expensive than those of the previous generation while maintaining their quality. Thanks to this, E&L products...
15 Round Loading Capacity, Original WE P08 Spare Magazine, Design for WE airsoft Gas Blow Back Pistol - Luger P08 Series
The ST 200 was purposefully crafted to be an unparalleled force on the battlefield, excelling at extended ranges due to a new caliber .408. Its design revolves around empowering modern warfighters with the capability to unleash devastatingly accurate firepower over long distances. The ST 200's exceptional performance has catapulted it to the heights of...
A replica of the assault rifle which during the Vietnam War was a standard issue weapon of the American troops. The replica was made of metal elements and of ABS plastic. The barrel guard, and the stock which holds the battery were made of plastic. The rest of the elements such as the receiver, outer barrel and the cocking handle were made of metal. The...
Jump Plate Carrier is a lightweight vest designed to provide comfort and maximum mobility. Vest offers many configuration options depending on the needs of the operator. Pouches can be mounted inside and outside (PALS webbing) of the cummerbund. Included soft dummy ballistic inserts.
7075-T6 aluminium alloy construction - CNC machining and high precision - Dual O-Ring design for better air sealing - Rubber cushion to absorb shock - For AEG Ver. 2 gear box (M4M16G3MP5SCARKAC PDWMASADASR25AR10)
Aluminum construction removable carry handle. Adjustable sighting. Universal fit for all standard flat top receivers on M4/M16 AEG.
Weight: 120 g Material: aluminum Color: black Length: 196 mm Width: 32 mm The silencer have 14 mm counterclockwise thread.
Set shirt and pants. Ideal for airsoft and paintball enthusiasts or fishing and hunting. ACU uniform set consists of trousers and a blouse in a classic, comfortable cut that is ideal for any kind of combat and outdoor activity. The blouse and trousers alike were sewn from durable Polycotton Rip-Stop material and are equipped with a multitude of pockets.
Heat Resistance Switch for version 3 gearbox. Precise workmanship ensures optimal current flow. Manufacturer: Arma Tech
G&G CM16 Raider M4 CQB RIS - Construction with SPECIAL FORCE Marking, - Fully/Semi Automatic Shooting Airsoft Electric Gun (AEG), - Black Color Version
The AGM MP002C sniper rifle replica is an excellent choice for novice airsoft players looking to embark on their journey into this type of entertainment. This budget-friendly version of a sniper rifle is modeled after a popular designated marksman rifle used by special units worldwide. It operates on a "bolt action" principle, which means that after each...
| Cell Type |
LiPo
|
|
Battery Capacity [mAh] |
2000
|
| Battery Voltage [V] |
7,4
|
| Plug Type |
DEAN
|
| Battery size [mm] |
10x21x126
|
| Number of Cells |
2
|
NOTICE! Batteries are covered only by starting warranty.
