The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Subcategories
There are 109 products.
Active filters
NanoAAB is the latest, 3rd generation MOSFET with active brake. The application of the most up-to-date transistors and microprocessor enabled us to create the smallest and the most reliable MOSFET with active brake in the market. Thanks to its special coating, it is resistant to atmospheric conditions.
Name LiPo 7,4V 2200mAh 20/40C Cell Type LiPo Battery Capacity [mAh] 2200 Battery Voltage [V] 7,4 Plug Type Tamiya small Battery size [mm] 15x35x103 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
Name LiPo 7,4V 2200mAh 20/40C Cell Type LiPo Battery Capacity [mAh] 2200 Battery Voltage [V] 7,4 Plug Type DEAN Battery size [mm] 15x35x103 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
Cell Type LiPo Battery Capacity [mAh] 2000 Battery Voltage [V] 7,4 Plug Type DEAN Battery size [mm] 10x21x126 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
Name LiPo 7,4V 2000mAh 15/30C Cell Type LiPo Battery Capacity [mAh] 2000 Battery Voltage [V] 7,4 Plug Type Tamiya small Battery size [mm] 10x21x126 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
Multiprocessor Charger with a Balancer Material: Metal + Polymer Weight: 530g Measurements: 135x145x35mm Manufacturer: Electro River™ NOTICE! Charges are covered only by starting warranty.
Name LiPo 7,4V 950mAh 20/50C Cell Type LiPo Battery Capacity [mAh] 950 Battery Voltage [V] 7,4 Plug Type Tamiya Battery size [mm] 13x25x70 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
Low-resistance cable length of 2 m [IPower]
High-quality silver-plated, low resistance wire in transparent silicone insulation. Designed for AEG replicas, its installation is highly recommended in tuned models. Resistant to high voltage and temperature ROHS certificate
Maximum intensity of discharge power:30AAccumulator type: metalAccumulator connector type: small TamiyaAccumulator cells type: lithiumAccumulator capacitance: 1500 mAhLength: 125 mmWidth: 20 mmAccumulator voltage: 7,4 VHeight: 6 mm NOTICE! Batteries are covered only by starting warranty.
Fuse - 1 pcs.- 25 amp. It rarely needs replacing, but this small part protects the motor from burning out in case of mechanical problems.
A small 7.2V 500mAh. battery for electric airsoft handguns like G18C, CZ99 and STI Classic, also it fit CYMA electric pistols. CM030, CM121, CM122, CM123, CM125, CM126 NOTICE! Batteries are covered only by starting warranty.
Easy to use NiMH battery charger.The charger uses 110-240V AC main power.Charges NiMH, NiCd batteries with up to 2A charge current.For 7,2V, 8,4V and 9,6V batteries. High quality, safe and durable.Tamiya Large plug. With led indicators. NOTICE! Charges are covered only by starting warranty.
9.6V NiMH Butterfly / Nunchuck Battery For Electric AEG - 1600 mAh is designed specifically for use with a Crane Stock. The battery is pack is separated into two halves to fit the slots of the crane stock around the buffer tube. NOTICE! Batteries are covered only by starting warranty.
Set of 2.8x0.5 Flat Connectors [Female + Male]Two sets of flat connectors intended for installation in wiring or the motor of an AEG replica. The set includes 2 pairs of heat-shrink tubings.
Quick and easy to use charger with balancer. After connection to power one of three LED s will flask. When charging is completed the one of three LED s will light constant. NOTICE! -Charges are covered only by starting warranty. - Can be yellow or blue (pictures)
This modern microprocessor charger is designed for NiMH and NiCD batteries. Suitable for batteries with the number of cells from 1 to 8.It recognizes the battery status and automatically stops the charging process when the battery is full. NOTICE! Charges are covered only by starting warranty.
Battery charger for NI-MH / NI-CD batteries. It has a signaling LED, the red color means charging and the green color - battery is full.
WARFET is GATE’s most advanced AEG Control System. It has 20 functions and almost 6 million possible configurations. The outstanding Tactical Programming Card provides you with very easy access to the WARFET Power Module settings. SUPER-EASY INSTALLATION - JUST PLUG&PLAY, NO SOLDERING REQUIRED
![Lithium [Lipo] 7.4v & 11.1v](https://airsoftguns.ie/c/27-category_default/lithium-batteries.jpg)
