Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
Name |
LiPo 7,4V 2200mAh 20/40C
|
Cell Type |
LiPo
|
Battery Capacity [mAh] |
2200
|
Battery Voltage [V] |
7,4
|
Plug Type |
Tamiya small
|
Battery size [mm] |
15x35x103
|
Number of Cells |
2
|
NOTICE! Batteries are covered only by starting warranty.
Electro River™ is a new quality on the LiPo battery pack market. The manufacturer has set for himself a goal to create a product whose quality will match even the best players on the market of batteries whilst at the same time retaining an attractive price. The offer includes high capacity packs designed with limited space replicas in mind - new packs are similar to a lighter in size!
High quality wiring and connectors guarantee maximum exploitation of the energy potential of the battery by minimizing losses during energy transfer. Such a solution also prevents overheating of the contacts Every cell has a Nanosafe® safeguard in order to minimize the risk of potential fire of the pack as a result of damage.
Due to Subzero Power® technology, the low temperature efficiency has been increased. Even in temperatures below zero the level of self-discharge is very low. High quality craftsmanship of each cell and other elements provides minimal internal resistance and voltage durability under stress. The abovementioned features have allowed to achieve up to 20% more charging cycles than in other Li-Po batteries! This makes Electro River™ products a very attractive offer both for beginners and advance LiPo battery users.
Lithium-Ion-Polymer (LiPo) packs are successors to the known Lithium-Ion (LiIon) packs. The basic advantage of LiPo is undoubtedly the ratio of capacity to size. The packs are of very small size whilst maintaining a very large electric efficiency, which allows for choosing an appropriate pack for practically every AEG replica. Do not feature memory effect. Can be charged very frequently, without the need to be fully discharged. Frequent charging is beneficial for every type of a battery.
It is crucial to remember not to discharge a LiPo pack to a level of less than 3V per cell and not to overcharge over 4,2V per cell. Another advantage of LiPo packs is a small percentage rate of self-discharge. Unused pack will lose approximately 3-5% of energy per month. It is important to pay attention to an unused pack as there is a risk that as a result of not being used over a prolonged period of time it can be discharged beneath the acceptable minimal value (3V per cell) and inadvertent chemical reactions may occur, which lead to a deterioration of the pack’s properties including a permanent damage and, in extreme cases, fire. Unused LiPo pack should be charged to an average of 70%.
Properly used, a LiPo pack has a exploitation period of on average 500-700 cycles. An important factor is the temperature thatLiPo packs can work in. In contrast to other batteries, LiPo cells perform well in low temperatures. However, they should be charged in room temperature. In order to maintain the good condition of LiPo batteries it is required to balance them during charging with a service connector, which most LiPo packs have (a good LiPo charger features an in-built balancer).
Included 3-Ring Hop-up Bucking Adjustable Outer Diameter Reduced Barrel Vibration Balanced Weight
Set of RIS rail covers - tan A set of eight rail covers: 2x 150mm, 2x 100 mm and 4x 50 mm. Their anti-slip texture allows for a much more firm, safer hold.
K0916P1 headset A K0916P1 headset with a built-in microphone for Kenwood type radios. It has a PTT button on the separate wiring that allows you to attach it onto any tactical equipment or put it down your sleeve and directly into your hand. Designed for: Baofeng radios / Kenwood plug radios Made of: plastic Weight: 60g Color: black Manufacturer: Baofeng
MSBS Plate Carrier type vest made from durable nylon. Equipped with vertical PALS straps on the front and rear panels. This allows for the attachment of additional pouches and equipment compatible with MOLLE load-bearing system. What’s more, additional equipment can be attached in any comfortable for the user way.
Metal Hop-Up chamber for AK series Made of: Metal Manufacturer: CYMA
Gun bag made of durable 600D nylon and padded by foam. It has a main compartment with a length of 100cm, 4 internal pouches for magazines, and a MOLLE laser cut panel on the outside. Weight: 780 g Material: nylon 600D Camouflage: black Length mm: 1000 Height mm: 280 Width milimeters: 80==
Weight: 170 g Accumulator type: NiMH Accumulator connector type: small Tamiya Accumulator cells type: mini Accumulator capacitance: 1600 mAh Accumulator voltage: 8,4 V NOTICE! Batteries are covered only by starting warranty.
The revolver replica is made mostly of metal so, it maintains the right weight and proper balance. Metal elements include such elements as the skeleton, barrel, barrel magazine, trigger and cock. Only the grip cladding was made of plastic. The replica is powered by a standard 12g CO2 capsule so that the shots can give the ball speed of around 328 FPS. The...
Tactical Glove Operator Made of 40% synthetic leather and 40% four way stretchy fabric Features: - Thermal plastic / rubber finger panels for extreme protection - Durable grip on sensitive spots - Strong loop and stap - Two layers fingertip - Design results in maximum tactile feel without comprising dexterity Available in 4 sizes; S/M/L/XL
The RedFiber scope from Theta Optics ™ is a guarantee of high quality at a reasonable price. Closed in a durable, metal housing, transparent optics with a cross hairs and x4 magnification. Thanks to the back light of the cross (red) the telescope can be successfully used in dynamically changing lighting. Highlight the optical fiber. A cross can be...
Replacement of Standard Magazine for Thompson M1A1 AEG . Plastic 6mm Bb's only . Capacity: 60 Rounds . Weight(Gram): 100
Color: white Weight: 0,25g (4000rds) Dimensions: 5,96 +/- 0,01mm Double polishing Manufacturer: Rockets™
The goggles are made of plastic. There are ventilation holes around the protective lens. The elastic rubber band located on the outer part of the glasses minimizes the glasses pressure on the nose and the cheekbones. The elastic adjustable mount makes that the glasses fit the head perfectly and do not slide down.
Weight: 160 g Accumulator type: metal Accumulator connector type: T-CONNECTOR (DEANS) Accumulator cells type: lithium Accumulator capacitance: 2300 mAh Length: 103 mm Width: 34 mm NOTICE! Batteries are covered only by starting warranty.
US WW2 M1 GARAND RIFLE REPLICA 6-POUCHES CARTRIDGE BELT [8FIELDS] A reproduction of the American adjustable belt for M1 Garand rifle ammunition(76-112cm). It is made of durable cotton canvas with high-strength steel hardware. Ideal for the reconstruction of US military units and allied from World War II and the Korean War. Elements of tactical equipment...
Replacement programming button needed for some GATE brand MOSFETs. 1 programming button Compatible with: MERF 3.2 and NanoHARD *Upgrading / repairing airsoft guns should only be done by skilled technicians. Airsoftguns.ie is not liable for any damages caused by the improper installation of the parts we sell.
Name |
LiPo 7,4V 2200mAh 20/40C
|
Cell Type |
LiPo
|
Battery Capacity [mAh] |
2200
|
Battery Voltage [V] |
7,4
|
Plug Type |
Tamiya small
|
Battery size [mm] |
15x35x103
|
Number of Cells |
2
|
NOTICE! Batteries are covered only by starting warranty.