The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Set of 2.8x0.5 Flat Connectors [Female + Male]Two sets of flat connectors intended for installation in wiring or the motor of an AEG replica. The set includes 2 pairs of heat-shrink tubings.
Suitable for M4/M16 Series Airsoft Electric Gun AEG RifleSteel Bolt Catch Release Steel Construction Design for Replace The Original Bolt Catch Release
6,03 steel precision inner barrel - 300 mm Precision inner barrel with a length of a 300 mm and 6,03mm diameter manufactured by PPS Airsoft. Precision barrel adds a lot to accuracy, range and repeatablitity of a shots. Precision barrel requires high quality BB"s used.
SHS Airsoft Electric Gun Upgrade Parts Series, 100:300 Gear Set, Low Noise Torque Type. Can be used at version 2 and version 3 gearbox.
SHS M90 AEG Upgrade Spring -- Full Metal Construction Upgrade Spring -- Suitable for most Airsoft Electric Gun
Spring Guide w/Bearing v.3Ball bearing spring guide improves the operation of the entire mechanism (spring movement around its own axis).Also slightly improved velocity.
This bearing has high durability against high-speed operation & heavy load also, it prevents cling by burning, constructed Full Steel Bearings, Suitable for Tokyo Marui Airsoft Electric Gun AEG Rifle models, As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
G&G Green Hop Up Rubber (40 degree). The Hop-Up rubber was made of silicon thanks to which is keeps it properties even in low temperatures due to the fact that it does not get stiff just like in the case of regular rubber. It performs perfectly both in typical conditions as in negative temperatures – it keeps it properties even in the temperatures...
SHS Piston Full Steel 3 Teeth for Gearbox V2, V3
SHS M170 AEG Spring Material: Steel 170 m/s spring
A complete safety selector lever, dedicated to the Cyma M4 / M16 replica. The selector fits all Cyma M4 replicas, no matter what the body material is. However, attention should be paid to the diameters of the opening on the right side of the body. The diameter of the blanking piece supplied with the kit is 8.35 / 10.42 mm. It is a complete kit. CAUTION!...
The reinforced complete V2 version gearbox was designed to be mounted in the M4 replica series. It is a perfect solution for those who want to buy a good gearbox in a reasonable price. The gearbox's frame was adapted to mount 7mm bearings and the V3 version allows to use it in the M4/M16 family carbine replicas.
Guarder SP85 spring (M85), Airsoft AEG, Upgrade your AEG's fps to 270 to 290fps. It is highly recommended to upgrade plastic bushings and spring guide to metal bushings and spring guide with this product.
6,03 steel precision inner barrel - 285 mm Precision inner barrel with a length of a 285 mm and 6,03mm diameter manufactured by PPS Airsoft. Precision barrel adds a lot to accuracy, range and repeatablitity of a shots. Precision barrel requires high quality BB"s used.
Precisely made barrel, with internal diameter 6.02 mm, provides precision and accuracy. Dedicated to replicas in the VSR 10. Has been carefully made of chrome plated brass. Precision inner barrels allow for better compression, improved accuracy, and in a few cases increase muzzle velocity. Although precision barrels often require more maintenance and...
High speed revolution Motor 40000 rpm high quality engine, which helps to increase the rate of response. Intended to increase the rate of fire, not to cooperate with the stronger spring than 100 m /s.
Made of:Steel Weight: 120g Diameter: 6,03mm Length: 510mm Manufacturer: PPS Airsoft/SHS
Set of 2.8x0.5 Flat Connectors [Female + Male]Two sets of flat connectors intended for installation in wiring or the motor of an AEG replica. The set includes 2 pairs of heat-shrink tubings.
