The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 1kg
Price
Price
€2.00 - €83.00
Subcategories
There are 65 products.
Active filters
Magazine with a capacity of 30 BBs dedicated to [M1 Garand] replicas by PJ, AK. It does not fit the ICS replica. Low-cap magazines must be prepared in particular way before first usage. Steps that must be made: · during first usage, magazine MUST NOT be fully loaded with bb's, · before first usage, magazine SHOULD be oiled with silicon oil for better...
3PX4 25rd Magazine for PX4 GBB Pistol-- Black Color -- Full Metal Construction-- 25 Rounds Loading Capacity-- For PX4 Series Airsoft Gas Blow Back GBB Pistol
Redox Alpha V2 microprocessor battery charger A new improved version of the popular Redox company’s Alpha charger. The Redox Alpha V2 is inter alia equipped with an actualized software ensuring a long and stable operation of the device. Additionally, a big radiator which discharges the heat very efficiently was mounted on the top of the charger. It is...
Accumulator connector type: small Tamiya Accumulator cells type: lithium Accumulator capacitance: 2100 mAh Length: 103 mm Width: 34 mm Accumulator voltage: 7,4 V Height: 16 mm NOTICE! Batteries are covered only by starting warranty.
Set of 2.8x0.5 Flat Connectors [Female + Male]Two sets of flat connectors intended for installation in wiring or the motor of an AEG replica. The set includes 2 pairs of heat-shrink tubings.
Dimensions: 12,9 x 2 x 1,2 (cm x cm x cm)Capacity: 1200 mAhVoltage: 7,4 VMaximum discharge power (semi fire): 24AMaximum discharge power (auto fire): 48A
WELL MB03 VSR-10 Airsoft Sniper Rifle Magazine ABS Contrustion 25 Rounds Loading Capacity For 6mm Plastic Bullet OnlySuitable for VSR-10 Series Airsoft Spring Sniper Rifle
This magazine is compatible with the M4 serie replica from brand like CYMA, APS, Dboys, JG, A&K, Arcturus, it's also compatible with AEG in Tokyo Marui standard. NOTE! This magazine requires a loading tool or Speedloader to fill it up. Mid-cap magazines must be prepared in particular way before first usage. Steps that must be made: · during first...
AEG Heatshrinks set contains 21 heatshrink tubes, all 9 cm [3,5 inch] long.
Polymer construction of hi-cap magazine for 300 BB's is very solid, light and durable. This magazine is compatible with the M4 serie replica from brand like CYMA, APS, Dboys, JG, A&K, which can be found on our website, it's also compatible with AEG in Tokyo Marui standard
Quick and easy to use charger with balancer. After connection to power one of three LED s will flask. When charging is completed the one of three LED s will light constant. NOTICE! -Charges are covered only by starting warranty. - Can be yellow or blue (pictures)
Magazine with space for CO2 cartridge dedicated to replica KP-13 KJW. Weight: 280 g Magazine type: CO2 Magazine model: low-cap Material: aluminum Color: black Magazine capacity BBs: 22
Battery NiMH 1600mAh 10,8V - mini cube type [8FIELDS] Accumulator connector type: small Tamiya NOTICE! Batteries are covered only by starting warranty.
KJW designed replicas that can be powered by green gas or CO2, it`s depend which magazine type we use. Presented magazine can be powered only by CO2. Magazine is sell without CO2 charge (photo is made for information).
For removing pin from battery connector plug Suitable for Small Type Plug
The long-awaited Li-Po battery dedicated to electric pistols. Its significantly improves the response to trigger pull -replica comes alive! The battery fits without any modifications in the replica, its charging is detached using chargers for Li-Po batteries. For charging, use only chargers dedicated for li-po batteries. The battery is connected to the...
This modern microprocessor charger is designed for NiMH and NiCD batteries. Suitable for batteries with the number of cells from 1 to 8.It recognizes the battery status and automatically stops the charging process when the battery is full. NOTICE! Charges are covered only by starting warranty.
Adapter for Li-Po batteries for electric pistols. Thanks to the use of this adapter, you can connect the battery to the professional chargers. It allows you to check all battery parameters while charging.
![C02 MAGAZINE FOR KP-13 [KJW]](https://airsoftguns.ie/18904-home_default/c02-magazine-for-kp-13-kjw-.jpg)
![Battery NiMH 1600mAh 10,8V - mini cube type [8FIELDS]](https://airsoftguns.ie/4773-home_default/battery-nimh-1600mah-108v-mini-cube.jpg)
![KP-05 CO2 MAGAZINE [KJW]](https://airsoftguns.ie/15242-home_default/kp-05-co2-magazine-kjw-.jpg)
