The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
| Accumulator connector type: | small Tamiya |
|---|---|
| Accumulator cells type: | lithium |
| Accumulator capacitance: | 2100 mAh |
| Length: | 103 mm |
| Width: | 34 mm |
| Accumulator voltage: | 7,4 V |
| Height: | 16 mm |
NOTICE! Batteries are covered only by starting warranty.
Dimensions: 10,3 x 3,4 x 1,6 (cm x cm x cm)
Capacity: 2100 mAh
Voltage: 7,4 V
Maximum discharge power (semi fire): 42A
Maximum discharge power (auto fire): 84A
The magazine fits replicas of many manufacturers, but we have realistically tested and confirmed the efficient operation of the models: CM.028 A, CM.028, CM.037, CM.028 S, CM.028 C, CM.031, CM.031 B, CM.036, CM.042A, CM.040 C, CM.039U, CM .039C, CM.042B, CM.042S, CM.042, JG0510, JG0509 The need for a delicate filing of the magazine hook can occur in...
The spacer set for inner barrel prevent it from vibrations and any problems with alignment. Particularly recommended for precision barrels as well as for long internal barrels. Made of durable polymer and additional rubber rings prevent their movement while suppressing all vibrations. Matches for Well MB01, MB08, MB01/08.
High-quality polymer tappet plate. It is the ideal solution if the tappet plate in your replica is damaged or worn out. CAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember that your warranty will be canceled.
Cartridge 6mm for Dan Wesson, 1 piece.
Aluminium CNC Piston Head A high quality, metal, reinforced piston head - used mainly in upgrades.
Combat knife 7inch made of 100% metal With a nylon handle Nylon cover included
Complete assembly cylinder for MB01 / 04/05/08 series replicas Made of: metal Application: MB01, MB04, MB05, MB08 Producer: WELL
Weight: 10 g Length: 34 mm Accumulator voltage: 3 V Diameter: 16 mm WARNING! Risk of fire and burns. Do not recharge, disassemble, heat above 100C or incinerate. Do not mix fresh batteries with used Lithium Batteries or other batteries types.
SHS Piston Full Steel 3 Teeth for Gearbox V2, V3
Modular ballistic vest modeled on the AAV vest from the FSBE gear used by reconnaissance units of the USMC. Used in the conditions of urban activities as well as in the field.
Weight: 300 g Material: plastic, aluminum
Jump Plate Carrier is a lightweight vest designed to provide comfort and maximum mobility. Vest offers many configuration options depending on the needs of the operator. Pouches can be mounted inside and outside (PALS webbing) of the cummerbund. Included soft dummy ballistic inserts.
The JG-0451 airsoft AEG gun is modelled on the famous Czechoslovakian made V61 Skorpion SMG or sub machine gun. The very solidly made replica has a mechanism specially constructed for this model inside that allows receiving 260 fps. The replica's parameters make it an ideal submachine gun for conducting safe games in CQB. Elements such as the stock,...
M1918 BAR replica magazine of S&T company, which can be found on our website. Hi-cap magazines should be prepared in particular way before first usage. Steps that must be made: before first usage, magazine SHOULD be oiled with silicon oil for better working, REMEMBER, If magazine is stored, it MUST be empty, REMEMBER to regularly oil the magazine with...
This magazine is fully compatible with AK brand like CYMA, Dboys, APS which can be found on our website, sometimes it need to be adjust by a little modification. Movie instruction below: * before first usage, magazine SHOULD be oiled with silicon oil for better working, * *REMEMBER* if magazine is stored, it *MUST* be empty, * *REMEMBER* to regularly oil...
Z Tactical 029 Bowman Evo III This product and the older Bowman biggest difference is 1. a microphone can be removed, so you can swap to wear headphones.
| Accumulator connector type: | small Tamiya |
|---|---|
| Accumulator cells type: | lithium |
| Accumulator capacitance: | 2100 mAh |
| Length: | 103 mm |
| Width: | 34 mm |
| Accumulator voltage: | 7,4 V |
| Height: | 16 mm |
NOTICE! Batteries are covered only by starting warranty.
![TAPPET PLATE V3 [POINT]](https://airsoftguns.ie/17908-home_default/tappet-plate-v3-point-.jpg)
