The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 1.1kg
Price
Price
€1.00 - €165.00
Subcategories
There are 302 products.
Active filters
SHS Piston Full Steel 7 Teeth for Gearbox V2, V3
WARFET is GATE’s most advanced AEG Control System. It has 20 functions and almost 6 million possible configurations. The outstanding Tactical Programming Card provides you with very easy access to the WARFET Power Module settings. SUPER-EASY INSTALLATION - JUST PLUG&PLAY, NO SOLDERING REQUIRED
SHS Piston Full Steel 3 Teeth for Gearbox V2, V3
A small 7.2V 500mAh. battery for electric airsoft handguns like G18C, CZ99 and STI Classic, also it fit CYMA electric pistols. CM030, CM121, CM122, CM123, CM125, CM126 NOTICE! Batteries are covered only by starting warranty.
The Guarder 0.20g Tracer BBs are the perfect ammunition for all speedsofters and tournament players. Fits for ALL BB Tracer (Glowing GREEN or RED Color dependence of delivery) Perfect sphere shape & smooth surface! Made of high strength/tough materials. Each bag contains 5000rd BBs, packaging may differ from the advertised image.
IPower nunchaku type Li-Po battery with a capacity of 2900mAh and a voltage of 7.4V. Its discharge current is 20C. It is equipped with a small Tamyia plug. LiPo batteries are characterised by a positive capacity-to-weight ratio and a low self-discharge rate, which benefits their use. The lithium-polymer batteries we offer are built with two (7.4V) or...
High-quality polymer tappet plate. It is the ideal solution if the tappet plate in your replica is damaged or worn out. CAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember that your warranty will be canceled.
Spring SP 110 [Guarder] with an uneven pitch AEG tuning.Both are polished face.Compatible with AEG Facilities, except PSG-1.Equivalent to 110 Systema.
Weight: 10 g Length: 34 mm Accumulator voltage: 3 V Diameter: 16 mm WARNING! Risk of fire and burns. Do not recharge, disassemble, heat above 100C or incinerate. Do not mix fresh batteries with used Lithium Batteries or other batteries types.
TITAN V3™ Basic Module - the best if you long for having TITAN in two or more airsoft guns. Then you do not need the second USB-Link from the Advanced set. It includes TITAN with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require highest quality....
UPGRADE SET FOR L96 - MB01, MB05, MB06 AND MB08 [WELL]- hard aluminium piston- Spring 500 fps- hard aluminium spring guide with bearningCAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember that your warranty will be cancelled.
Lithium-ion batteries are a novelty in the world of ASG! It is a type of battery known from laptops phones and wireless equipment. This type of battery allows you to accumulate twice as much energy as NiMH batteries with the same weight and size. Additional advantages include no memory effect and slower self-discharge. The construction of this battery...
Anti-heat selector plate, G3 series Made from a heat resisting compound. All electrical contact surfaces have a high-quality plating to ensure low inner resistance in ohm (Ω).
Includes Bucking 70 Degrees Of Hardness For Marui Style AEG Barrels
During charging LiPo battery needs to be remembered: * Use ONLY a charger approved for lithium batteries. * Charging each time using the balancer is advisable. It is preferable to use it at least every 5 cycles of loading. * DO NOT leave battery without supervision when it is charging. * DO NOT use broken cells. * Avoid prolonged charging, it can cause...
Weight: 5 g Material: steel
Complet spring set for gearbox P90. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working, in this case warranty will be cancelled. Weight: 5 g Material: steel
Accumulator type: metal Accumulator connector type: small Tamiya Accumulator cells type: lithium Accumulator capacitance: 1500 mAh Length: 125 mm Width: 20 mm Accumulator voltage: 11,1 V NOTICE! Batteries are covered only by starting warranty.
![TAPPET PLATE V3 [POINT]](https://airsoftguns.ie/17908-home_default/tappet-plate-v3-point-.jpg)
