Z Tactical Comtac I Headset
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
IPower nunchaku type Li-Po battery with a capacity of 2900mAh and a voltage of 7.4V. Its discharge current is 20C.
It is equipped with a small Tamyia plug.
LiPo batteries are characterised by a positive capacity-to-weight ratio and a low self-discharge rate, which benefits their use. The lithium-polymer batteries we offer are built with two (7.4V) or three (11.1V) cells. These cells are small in relation to the offered capacity, thanks to which they can be used in replicas where space for a battery is limited. Rifles powered by this type of energy source will work more efficiently and longer, compared to the traditional type of batteries.
NOTICE! Batteries are covered only by starting warranty.
IPower nunchaku type Li-Po battery with a capacity of 2900mAh and a voltage of 7.4V. Its discharge current is 20C.
It is equipped with a small Tamyia plug.
LiPo batteries are characterised by a positive capacity-to-weight ratio and a low self-discharge rate, which benefits their use. The lithium-polymer batteries we offer are built with two (7.4V) or three (11.1V) cells. These cells are small in relation to the offered capacity, thanks to which they can be used in replicas where space for a battery is limited. Rifles powered by this type of energy source will work more efficiently and longer, compared to the traditional type of batteries.
Follow Safety Guidelines
This product complies with the standards for market approval, signifying that the manufacturer and seller have taken necessary efforts to ensure safety during product usage according to the instructions. Using the product contrary to the instructions is at your own risk.
Attention! Stop using the battery if any of the following problems occur: odor, color change, excessively high battery temperature, shape alteration, leaks, or unusual sounds. If you're charging the battery, disconnect the charger from the power source first. Keep the battery away from anything that could catch fire. Dispose of batteries in specially designated containers.
Principles of Correct Li-Po Battery Usage
Your battery will function as intended as long as you adhere to the principles of proper usage:
Charging:
Charge the Li-Po battery exclusively in lithium-polymer mode using a microprocessor charger.
To ensure even cell charging, use a charger with a balancer (service plug).
Do not leave the battery unattended in the charger (including overnight). Place the battery in a safe charging bag during charging.
Do not overcharge above 4.2V per cell.
During Usage:
Avoid discharging below 3.2V per cell that leads to permanent damage, as well as chemical reactions that could result in ignition.
Do not exceed the permissible discharge current (capacity in mAh multiplied by the C rating). For example, for a 2100 mAh battery with a 15C rating (2100 mAh x 15 = 31500 mAh) – the critical value is 31.5 amps. Keep away from flammable objects.
Do not short-circuit terminals, puncture, or damage wiring.
Storage:
Do not store the battery connected to the replica. During extended storage, periodically check the minimum charge level using a dedicated charger or security alarm.
Store in a partially charged state – ideally around 70%.
Shield from direct sunlight exposure. Recommended ideal storage temperature – 12°C.
Attention! Defects resulting from improper product handling are beyond the control of the seller and as such, do not provide grounds for declaring the product non-compliant with the agreement. Consumable components undergo natural wear and tear, which does not automatically mean the product is non-compliant with the agreement.
NOTICE! Batteries are covered only by starting warranty.
Weight: 105 g
Accumulator type: LiPo
Accumulator connector type: small Tamiya
Accumulator cells type: lithium
Length: 120 mm
Width mm: 15
Height mm: 17
Accumulator voltage V: 7.4
Accumulator capacitance mAh: 2900
Manufacturer: IPower
Accumulator type: metal Accumulator connector type: small Tamiya Accumulator cells type: lithium Accumulator capacitance: 1500 mAh Length: 125 mm Width: 20 mm Accumulator voltage: 11,1 V NOTICE! Batteries are covered only by starting warranty.
Name LiPo 7,4V 2200mAh 20/40C Cell Type LiPo Battery Capacity [mAh] 2200 Battery Voltage [V] 7,4 Plug Type DEAN Battery size [mm] 15x35x103 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
Weight: 5 g code IP ALARM
Accumulator connector type: T-connerctor Accumulator cells type: lithium Accumulator capacitance: 2200 mAh Length: 105 mm Width: 20 mm Accumulator voltage: 11.1 V Height: 10 mm
Lithium-ion batteries are a novelty in the world of ASG! It is a type of battery known from laptops phones and wireless equipment. This type of battery allows you to accumulate twice as much energy as NiMH batteries with the same weight and size. Additional advantages include no memory effect and slower self-discharge. The construction of this battery...
Model Number 8s voltage display, Display Type Analog and Digital, Measuring Range 0.5-4.5v, Accuracy Class +-0.01v, built-in buzzer alarm, function low voltage checker for airsoft lipo (Lithium), cell count 2-8s
Weight: 70 g Accumulator type: metal Accumulator connector type: T-connerctor Accumulator cells type: lithium Accumulator capacitance: 1200 mAh Length: 175 mm Width: 14 mm Accumulator voltage: 11.1 V Height: 15 mm
Weight: 160 g Accumulator type: metal Accumulator connector type: small Tamiya Accumulator cells type: lithium Accumulator capacitance: 2300 mAh Length: 103 mm Width: 34 mm NOTICE! Batteries are covered only by starting warranty.
Name LiPo 7,4V 2000mAh 15/30C Cell Type LiPo Battery Capacity [mAh] 2000 Battery Voltage [V] 7,4 Plug Type Tamiya small Battery size [mm] 10x21x126 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
Dimensions: 12,9 x 2 x 1,2 (cm x cm x cm)Capacity: 1200 mAhVoltage: 7,4 VMaximum discharge power (semi fire): 24AMaximum discharge power (auto fire): 48A
Name LiPo 7,4V 950mAh 20/50C Cell Type LiPo Battery Capacity [mAh] 950 Battery Voltage [V] 7,4 Plug Type Tamiya Battery size [mm] 13x25x70 Number of Cells 2 NOTICE! Batteries are covered only by starting warranty.
A small 7.2V 500mAh. battery for electric airsoft handguns like G18C, CZ99 and STI Classic, also it fit CYMA electric pistols. CM030, CM121, CM122, CM123, CM125, CM126 NOTICE! Batteries are covered only by starting warranty.
The long-awaited Li-Po battery dedicated to electric pistols equipped with a small Deans connector. For charging, use only chargers dedicated for li-po batteries. The battery is connected to the charger through the balancer port. Suitable for replicas such as CM 121.CM122, CM123, CM125, CM126, CM127, CM128 and similar equipped with a small Deans...
Accumulator connector type: small Tamiya Accumulator cells type: lithium Accumulator capacitance: 2200 mAh Length: 105 mm Width: 20 mm Accumulator voltage: 11.1 V Height: 10 mm
The long-awaited Li-Po battery dedicated to electric pistols. Its significantly improves the response to trigger pull -replica comes alive! The battery fits without any modifications in the replica, its charging is detached using chargers for Li-Po batteries. For charging, use only chargers dedicated for li-po batteries. The battery is connected to the...
Weight: 160 g Accumulator type: metal Accumulator connector type: T-CONNECTOR (DEANS) Accumulator cells type: lithium Accumulator capacitance: 2300 mAh Length: 103 mm Width: 34 mm NOTICE! Batteries are covered only by starting warranty.