The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
SHS Piston Full Steel 3 Teeth for Gearbox V2, V3
Electric Pistol Great Starter Sidearm Fully Automatic Mode A non-blowback Airsoft 6mm BB Electric Pistol which is based upon some of the World's most popular pistols, with all of the best bits taken and combined to create one unique pistol which is highly ergonomic.
Big Steel Protective MASK Just make some new cutting to let the mask have '' 3D '' outlook, Adjustable & Elastic Belt Strap. Weight:235 g Material: nylon 600D, steelColor: Olive, Green, OD
Adapter for Li-Po batteries for electric pistols. Thanks to the use of this adapter, you can connect the battery to the professional chargers. It allows you to check all battery parameters while charging.
Suitable for M4/M16 Series Airsoft Electric Gun AEG RifleSteel Bolt Catch Release Steel Construction Design for Replace The Original Bolt Catch Release
FAST PJ Helmet Cover A helmet cover by Ultimate Tactical. Made from nylon material, reinforced with RIP-STOP weave. Features a hole for a night vision goggles mount.
CM.041 is a replica manufactured by CYMA. It is a replica of MP5 rifle. It is the next quantum leap in the production of replicas asg by Chinese manufacturers. It surprises with incredible quality. The upper and lower of the body are very well matched, there are no clearances. The material that was used for the production of the replica is metal (upper,...
The KA-BAR Throwing Knife Set features three throwing knives and a polyester storage pouch. The Throwing Knives are made of 3Cr13 steel and are marked with the KA-BAR Skull logo. Stock up on this throwing knife set and limit your time walking back and forth to your target!Technical data:- Steel: 2Cr13- Rockwell hardness: 50-53- Overall length: 237 mm-...
Silencer with quick installation system, mounted on most flash suppressor used in ASG.
Fuse - 1 pcs.- 25 amp. It rarely needs replacing, but this small part protects the motor from burning out in case of mechanical problems.
RIS rail tactical grip The grip is made of durable plastic. It is mounted on a 22mm RIS rail. Inside of it there is a compartment and it is opened from the bottom. It can hold, for example spare batteries. Weight: 115 g Made of: plastic Color: black Manufacturer: WELL
The GG-105 Airsoft Pistol Replica, also known as the M9, is a replica of the iconic pistol with its origins in real firearms. The M9 was introduced into the United States military arsenal in 1985 and has since become one of the most recognizable and highly regarded firearms worldwide. Its fully metal construction and reliability have made the M9 a...
Z Tactical 029 Bowman Evo III This product and the older Bowman biggest difference is 1. a microphone can be removed, so you can swap to wear headphones.
Weight: 240 g Material: 600D polyester Color: wooden Camouflage: black
Suitable for CM121 Desert Eagle Series AEP AEG Pistol. Suitable for 6mm Plastic Bullet BB. Weight - Approx 130g
HM0399 Polymer Stock for 416 Replicas A light, adjustable stock made of polymer, compatible with any replica equipped with a HK416 / AR15 buffer tube. The stock features a thick, rubber recoil pad and tactical sling swivels.
Lithium-ion batteries are a novelty in the world of ASG! It is a type of battery known from laptops phones and wireless equipment. This type of battery allows you to accumulate twice as much energy as NiMH batteries with the same weight and size. Additional advantages include no memory effect and slower self-discharge. The construction of this battery...
SHS Piston Full Steel 3 Teeth for Gearbox V2, V3
