The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
1" molle webbing throughout the airsoft backpack. 4 zipper compartments and lots of inside pouches for storing. Adjustable shoulder, chest and waist strap. Hydration system compatible. Hydration system drink tube exit hole on top of the backpack.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
TITAN V3™ Basic Module - the best if you long for having TITAN in two or more airsoft guns. Then you do not need the second USB-Link from the Advanced set. It includes TITAN with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require highest quality. If you decide to have more functions, there is always option to upgrade firmware from BASIC to ADVANCED. Basic Module is also suitable for you if you decide to purchase the USB-Link separately.
Kit contents:
NOTICE! In order to configure TITAN, you need the USB-Link which is not included in this kit.
TITAN V3™ is an AEG Control System for V3 gearbox which will transform your AEG into an advanced training weapon. Adjust your AEG using the USB-Link and GATE Control Station app. TITAN V3 enables you to adjust the trigger sensitivity with military precision. The proximity trigger sensor offers you even 250 possible sensitivity settings. Gain a tactical advantage thanks to the extremely fast trigger response and many other useful functions. Give your AEG a new lease of life!
Thanks to the optical sensors we have eliminated the problem of faulty switches that can occur in competitors' drop-in mosfets. The trigger has no mechanical connections with the PCB. This eliminates mechanical stresses and provides for high reliability.
WARFET is GATE’s most advanced AEG Control System. It has 20 functions and almost 6 million possible configurations. The outstanding Tactical Programming Card provides you with very easy access to the WARFET Power Module settings. SUPER-EASY INSTALLATION - JUST PLUG&PLAY, NO SOLDERING REQUIRED
TITAN V2 Basic Module - the best if you long for having TITAN in two or more airsoft guns. Then you do not need the second USB-Link from the Advanced or Complete set. It includes TITAN with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require...
It has 8 functions. Thanks to its special coating, it is resistant to atmospheric conditions (Military Specification MIL-V-173C). Battery protection supports: Li-Po 7.4V / 11.1V / 14.8V. You can also disable the protection and use other batteries.
Low-resistance cable length of 2 m [IPower]
Replacement programming button needed for some GATE brand MOSFETs. 1 programming button Compatible with: MERF 3.2 and NanoHARD *Upgrading / repairing airsoft guns should only be done by skilled technicians. Airsoftguns.ie is not liable for any damages caused by the improper installation of the parts we sell.
Battery Wire Plug Converter- Battery wire plug converter about 125mm long.
TITAN V2™ is an AEG Control System for V2 gearboxes which will transform your AEG into an advanced training weapon. Adjust your AEG and check the Statistics using USB-Link and GATE Control Station app for PC and Android devices. Gain a tactical advantage thanks to the extremely fast trigger response, option of adjusting trigger sensitivity to your...
NanoAAB is the latest, 3rd generation MOSFET with active brake. The application of the most up-to-date transistors and microprocessor enabled us to create the smallest and the most reliable MOSFET with active brake in the market. Thanks to its special coating, it is resistant to atmospheric conditions.
Plug and socket set. Large contact surface. Heat resistant polymer. Held in place with spring tension.
Adapter cable - large male - small female
High-quality silver-plated, low resistance wire in transparent silicone insulation. Designed for AEG replicas, its installation is highly recommended in tuned models. Resistant to high voltage and temperature ROHS certificate
AEG Heatshrinks set contains 21 heatshrink tubes, all 9 cm [3,5 inch] long.
Model Number 8s voltage display, Display Type Analog and Digital, Measuring Range 0.5-4.5v, Accuracy Class +-0.01v, built-in buzzer alarm, function low voltage checker for airsoft lipo (Lithium), cell count 2-8s
NanoASR is the latest standard third generation MOSFET. The application of the most up-to-date transistors and microprocessor enabled us to create the smallest and most reliable MOSFET in the market. Thanks to its special coating, it is resistant to atmospheric conditions.
TITAN V3™ Basic Module - the best if you long for having TITAN in two or more airsoft guns. Then you do not need the second USB-Link from the Advanced set. It includes TITAN with BASIC firmware edition. The BASIC firmware edition is an economic version with limited number of functions, dedicated for those who prefer simplicity but require highest quality. If you decide to have more functions, there is always option to upgrade firmware from BASIC to ADVANCED. Basic Module is also suitable for you if you decide to purchase the USB-Link separately.
Kit contents:
NOTICE! In order to configure TITAN, you need the USB-Link which is not included in this kit.
