The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
| Weight: | 5 g |
|---|---|
| Material: | steel |
CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working, in this case warranty will be canceled.
Characterized by small size spring powered replica of H&K USP Compact pistol. Has original manufacturer's markings on slide and grip. Frame, slide, barrel, safety lever, magazine and grip are made of high quality ABS composite. Made of metal are: trigger, inner barrel and hammer. Magazine holds 12 rounds. Spring replica requires reloading after...
High Quality Army Paint Spray Quick dry 400 ml.For use on weapons, vehicles, textiles, toolsEasy removable from most of surfaces PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
Modular ballistic vest modeled on the AAV vest from the FSBE gear used by reconnaissance units of the USMC. Used in the conditions of urban activities as well as in the field.
Color: black Material: nylon
Steel sling balls, 7 mm caliber. Enables accurate and effective long distance shooting.Technical data:- Diameter: 7 mm- Quantity: 100 pieces- Weight: 157 g
Steel Ball Bearing Spring Guide V3 A ball bearing spring guide made of steel. It is intended for installation in gearbox V3 replicas. Bearings enable increased reliability and extended gearbox lifetime.
Replica of a new series of low-budget rifles one of the most popular Chinese manufacturers in the world - CYMA. The rifle offers the same things as the other products of that manufacturer (metal gearbox and other mechanical parts), but thanks to the use of high-quality plastic in place of elements made of metal (eg. body, handguard, front/rear sights,...
Made of: steel Weight: 130g Diameter: 6,03mm Length: 450mm Manufacturer: PPS Airsoft/SHS
WELL Trigger Assembly Suitable for airsoft Type 96 series by WELL MB-01 / SD96 / UTG Type 96 Shadow Ops / Bravo / Double Eagle / Maruzen and other compatible airsoft bolt action sniper rifles. Steel made upgrade part.
Steel Cut Off Lever for Ver.II Gearbox
Magazine pouch can hold AK47/AKM magazines or many other accessories. The open design provides fast reload and a additional rubber cord with a comfortable grip protects magazine from falling. Compatible with all MOLLE platforms.
Weight: 130 g Magazine type: Green Gas Magazine model: low-cap Magazine capacity: 23 BBs Material: ABS Color: black Presented magazine can be powered only by green gas.
A replica of the M712 pistol, it was made entirely of light alloys. Elements such as the trigger or hammer are movable and made of light alloys. This model does not have a blow-back system, but the safety and rear sight are functional. The replica is very durable and faithfully reproduced in relation to the original, the 1: 1 scale has been preserved.
Suitable for M4/M16 Series Airsoft Electric Gun AEG RifleSteel Bolt Catch Release Steel Construction Design for Replace The Original Bolt Catch Release
Weight: 105 g Material: brass Length: 510 mm Internal diameter: 6,03 mm
Styled after the famous G Series pistol the KJW-KP13C offers a custom look similar to Agency Arms and SAI without their price tags. The KJW KP-13C GBB is the new lighter version of the KJ Works KP-13, it features a stylish pistol frame has been known for years before the introduction of the similar pistols that uses polymer body which has a textured...
| Weight: | 5 g |
|---|---|
| Material: | steel |
![M4 AEG WITH KEYMOD CM.515 Tan [CYMA]](https://airsoftguns.ie/17296-home_default/m4-aeg-with-keymod-cm515-tan-cyma-.jpg)
