The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
UPGRADE SET FOR L96 - MB01, MB05, MB06 AND MB08 [WELL]
- hard aluminium piston
- Spring 500 fps
- hard aluminium spring guide with bearning
CAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember that your warranty will be cancelled.
The spacer set for inner barrel prevent it from vibrations and any problems with alignment. Particularly recommended for precision barrels as well as for long internal barrels. Made of durable polymer and additional rubber rings prevent their movement while suppressing all vibrations. Matches for Cyma 701, MB03, Bar 10. Diameter without o-rings 9,6/18,25...
SILENCER ADAPTER FOR SNIPER RIFLE S24 - VSR10 * Weight: 55 g * Material: steel * Color: Black
UPGRADE SET FOR VSR10 - MB02/03 SERIES [WELL]- hard aluminium piston- Spring 500 fps- hard aluminium spring guide with bearingCAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember that your warranty will be cancelled.
Adapter allows to mount the silencer to the sniper rifle CM.701, CM.702, CM.700, TM VSR-10, JG BAR-10. It have 14 mm counterclockwise thread.
A high-quality spring designed to improve performance in the replica. Made of high-quality, hardened steel. Can work with Cyma 701, MB03, BAR10. Outer diameter -11,1mm, internal diameter-8,2mm. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working,...
DESCRIPTION A high-quality spring designed to improve performance in the replica. Made of high-quality, hardened steel. Can work with L96, TM models, such as : WELL MB4401, 02, 03, 06, 07, 08, 09. Outer diameter -11,6mm, internal diameter-8,1mm. CAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must...
SHS 2nd Sear for Marui L96 AWS Sniper (Steel)
A high-quality spring designed to improve performance in the replica. Made of high-quality, hardened steel. Can work with Cyma 701, MB03, BAR10. Outer diameter -11,1mm, internal diameter-8,2mm. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working,...
Weight: 170 g Material: metal
Reinforced, steel Zero Trigger set with Aluminum piston for VSR-10 series and similar replicas, compatible with Marui standard. Manufactured by Action Army company from Taiwan. Gives the best sensitive trigger action with using high power upgrade spring. The set includes: - Reinforced, steel trigger, trigger sear and stopper sear - Reinforced,...
The spacer set for inner barrel prevent it from vibrations and any problems with alignment. Particularly recommended for precision barrels as well as for long internal barrels. Made of durable polymer and additional rubber rings prevent their movement while suppressing all vibrations. Matches for Well MB01, MB08, MB01/08.
High quality professional HopUp rubber made of specially selected blend of silicone rubber. When correctly installed it will improve the tightness and BB's performance. Manufactured by Action Army company from Taiwan. Product Information; Dedicated to replicas that conform to the Maruzen type 96 standard and similar. Action Army Hop Up Bucking for Type...
WELL Trigger Assembly Suitable for airsoft Type 96 series by WELL MB-01 / SD96 / UTG Type 96 Shadow Ops / Bravo / Double Eagle / Maruzen and other compatible airsoft bolt action sniper rifles. Steel made upgrade part.
Adapter for Airsoft Sniper Rifle - 002 - AGM, L96, STEYR Adapter allows to mount the silencer to the sniper rifle. It have 14 mm counterclockwise thread.
Complete assembly cylinder for MB01 / 04/05/08 series replicas Made of: metal Application: MB01, MB04, MB05, MB08 Producer: WELL
Adapter for Airsoft Sniper Rifle WELL 96, MB01/MB05, Adapter allows to mount the silencer to the sniper rifle. It have 14 mm counterclockwise thread.
UPGRADE SET FOR L96 - MB01, MB05, MB06 AND MB08 [WELL]
- hard aluminium piston
- Spring 500 fps
- hard aluminium spring guide with bearning
CAUTION! Installation requires experience and manual skills. If you decide on a personal installation you must remember that your warranty will be cancelled.
