The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
0kg - 9kg
Price
Price
€1.00 - €630.00
Subcategories
There are 482 products.
Active filters
Introducing a robust reproduction of the Submachine Gun MK5 by [S&T], a formidable counterpart to the renowned Sten, solidifying its status as an iconic weapon in the British armed forces. Constructed from stamped steel, this firearm underwent rigorous trials as a potential successor to the Sten in early 1944 and swiftly earned its place among...
SHS Aluminum Air Seal Nozzle (long Type) -- 7075 Aluminum Construction -- For AK Series Airsoft AEG Rifle -- Purple Color
Mechanism works well on not harder spring than 150 m/s. All gears are fabricated on CNC machines.
Full Metal, green gas powered Beretta M9 IA pistol replica. Manufactured by KJ-Works for the Danish company ASG DK. It was made entirely of metal. Composite, as in original are only grip pads. With its non-slip texture, this model will fit perfectly in your hand. The gun is equipped with Blow Back system, which gives strong recoil. After shooting the...
KJW designed replicas that can be powered by green gas or CO2, it`s depend which magazine type we use. Presented magazine can be powered only by CO2. Magazine is sell without CO2 charge (photo is made for information).
7075-T6 aluminium alloy construction - CNC machining and high precision - Dual O-Ring design for better air sealing - Rubber cushion to absorb shock - For AEG Ver. 2 gear box (M4M16G3MP5SCARKAC PDWMASADASR25AR10)
It's a replica of the newest series of Arcturus LITE, in which the upper and lower receivers were made of durable nylon. Thanks to the nylon body, the weight and the price of the replica were reduced. Using the nylon, the replica did not lose its strength, because the socket of the receiver extension tube and a barrel socket with a thread for the...
This magazine is fully compatible with AK brand like CYMA, Dboys, APS which can be found on our website, sometimes it need to be adjust by a little modification.
ULTIMATE® Upgrade Switch assembly. Switch assembly, AK-47
SHS 2nd Sear. Steel construction. Essential part for upgrading your Airsoft Sniper. This reinforced 2nd sear design for supporting high power upgrades.
DESCRIPTION Thoroughly and carefully made replica of P90. The body is made from the polymer. The replica has three metal Picatinny rail allowing mounting of tactical accessories (optics, flashlights, laser sights). The mechanism is a dedicated metal gearbox v.6 with steel-sliding bearings 6mm, cylinder type 1, reinforced piston with aluminum sleeve,...
Set of 2.8x0.5 Flat Connectors [Female + Male]Two sets of flat connectors intended for installation in wiring or the motor of an AEG replica. The set includes 2 pairs of heat-shrink tubings.
The M58B shotgun is by far the best deal out there for airsoft. Its made strong and has a metal trigger, heat shield, and barrel.M58B rifle replica is made of metal and ABS.Handle grip & body is made of ABS.
This is a precision machined SHS Steel Cut Off Lever for Version 3 metal gearbox AEGs. This Steel Cut Off Lever should fit in most Version 3 metal gearboxes without any modification. The steel construction makes this cut off lever twice as strong as normal zinc alloy cut off levers. The SHS Steel Cut Off Lever is extremely sturdy and precisely machined,...
CM.051 is a replica of a submachine gun made famous in the days of Prohibition-era in the United States as a weapon used by both gangsters and police, and during World War II by American soldiers. The buttstock, pistol grip, and foregrip are stylized on wood made of plastic. Magazine, receiver, frame group, bolt, bolt handle, safety, trigger, magazine...
The sniper rifle replica is made of metal and high quality plastic. The metal made elements are as follows: the minor elements and also the barrel, the bolt carrier, the cocking handle, the RIS rail and the trigger. Scope and bipod NOT INCLUDED. Please Choice separately from list below
M9A1 replica is a reproduction of a popular Italian pistol. Replica was made from polymer and metal. It"s characterized by a nice weight - 1kg! because it"s almost full metal -skeleton, slide, magazine and barrel were made from metal. Only grip covers were made from polymer. Please note!!! Gun came without markings / serial number!!!
Trigger Assembly for VSR10 90° piston sear captures
M203 Short Grenade Launcher by [S&T] The Short version of the iconic M203 grenade launcher. Made of durable polymer, it maintains the solid structure of a metal build while significantly reducing weight, offering greater user comfort. The launcher supports 40 mm ammunition and, thanks to its wide range of mounting options (RIS, Weaver, Picatinny), it...
Replica of a new series of low-budget rifles - CYMA. The rifle offers the same things as metal parts (eg, body, handguard, front / rear sights) , buffer tube, flash hider, magazine) allowed reduced the price. Now, every beginner will be able to afford the ASG with a reliable replica for a lower price.
![KP-05 CO2 MAGAZINE [KJW]](https://airsoftguns.ie/15242-home_default/kp-05-co2-magazine-kjw-.jpg)
![P90 CM.060B SMG [CYMA]](https://airsoftguns.ie/14876-home_default/p90-cm060b-smg-cyma-.jpg)
![M4 CQB CM.517 - BLACK [CYMA]](https://airsoftguns.ie/12103-home_default/m4-cqb-cm517-black-cyma-.jpg)