The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
* Adapter unit designed to convert most SLS duty and tactical holsters to a MOLLE vest system * Ambidextrous * Works with nearly all Safariland holsters and duty gear
Kids BDU zip-pants black Ideal for airsoft and paintball enthusiasts or fishing and hunting.
This is a precision machined SHS Steel Cut Off Lever for Version 3 metal gearbox AEGs. This Steel Cut Off Lever should fit in most Version 3 metal gearboxes without any modification. The steel construction makes this cut off lever twice as strong as normal zinc alloy cut off levers. The SHS Steel Cut Off Lever is extremely sturdy and precisely machined, ensuring that it fits perfectly in Version 3 gearboxes.
This is a precision machined SHS Steel Cut Off Lever for Version 3 metal gearbox AEGs. This Steel Cut Off Lever should fit in most Version 3 metal gearboxes without any modification. The steel construction makes this cut off lever twice as strong as normal zinc alloy cut off levers. The SHS Steel Cut Off Lever is extremely sturdy and precisely machined, ensuring that it fits perfectly in Version 3 gearboxes.
Specs:
Construction: Full Steel construction
Compatibility: Should fit most Version 3 metal Gearboxes
Package Contents: 1x Steel Cut Off Lever, 1x Cut Off Lever Screw, 1x Cut off Lever Spring
The cut off lever is a mechanical piece of the gearbox responsible for semi-auto fire. When you pull the trigger the sliding contact bridges the gap between the gun's main trigger contacts - once the gearbox has cycled once, the cut off lever pushes the trolley away from the trigger contacts, stopping the gun from firing. To shoot again, you need to pull the trigger each time.
In many guns this part is made out of weak pot-metal which over time wears down. The big symptom of a worn cut-off lever is the loss of semi-auto fire. If this happens then it's time to replace your cut off lever.
This particular one is manufactured by SHS out of steel, and is much stronger than the factory original. It is only for V3 gearboxes (G36, AK, MP5K etc), and fitment requires disassembly of the gearbox.
Disclaimer: Any and all airsoft upgrade parts purchased from AirsoftGuns.ie will be used/installed at owner's discretion. Actual performance results depend on quality of installation and other possible performance-affecting factors. We are not responsible for any damage that may occur with improper installation. For best results, please do all upgrades at a certified professional airsoft technician/shop.
Metal trigger pin for M4, M16 series and similar replicas. It may require shortening to fit perfectly with your replica. Weight: 2 g Material: steel Length: 29 mm
Cocking handle's spring for the M series
Complet spring set for gearbox MP5. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working, in this case warranty will be cancelled. Weight: 5 g Material: steel
The pin is designed for the body of the G36 type replicas.
Airsoft AEG Upgrade Part Series, Gearbox Spring for Version 2. Reversal Stop Latch Spring, Tappet Spring, Cover Spring, Cutoff Lever Spring, Switch Spring
When hair trigger starts to be boring, it means you are ready for the next level. With Quantum Trigger and ASTER V2, you can set sensitivity from ludicrous ‘touch’ through ‘hair’ to full movement. Features: Ultra-high resolution – even 60 trigger sensitivities for the 1st mm (0.04 in) of movementEven 470 possible sensitivity levels for whole...
M4 Bolt Catch Release, works on all M4 and M16 guns. Replaces your bolt catch.
Upgrade trigger for G3 series. The ULTIMATE® Upgrade Series trigger is made of steel to secure the best performance and durability.
M-147 Bottom Receiver for M4/M16 Replicas A lightweight, made entirely of polymer bottom receiver for AR15 family of replicas. The set includes a fire mode selector. Purpose: M4 / M16 replicas Material: Polymer Weight: 105 g Color: Black Manufacturer: Golden Eagle
The catch is ambidextrous so can be installed for either left or right handed shooters, is made of sterner materials than some stock mag catches and has a strong but purposeful feedback to the action. Making sure you have replacement parts on hand can avoid tactical blunders in the field so don't hesitate to get supply of replacement parts, especially...
SHS Airsoft AEG Upgrade Part Series -- Gearbox Spring for Version 3
WELL Trigger Assembly Suitable for airsoft Type 96 series by WELL MB-01 / SD96 / UTG Type 96 Shadow Ops / Bravo / Double Eagle / Maruzen and other compatible airsoft bolt action sniper rifles. Steel made upgrade part.
G36 Replica Pin Steel assembly pin for G36 replicas.
Complet spring set for gearbox P90. CAUTION! If you decide for self-reliant AEG modification or parts mounting, you must remember that our company is not responsible of inappropriate replica working, in this case warranty will be cancelled. Weight: 5 g Material: steel
Cut Off Lever fits all V7 / M14 gearboxes. Ideal and durable spare part, the original should be worn.
Steel Cut Off Lever for Ver.II Gearbox
This is a precision machined SHS Steel Cut Off Lever for Version 3 metal gearbox AEGs. This Steel Cut Off Lever should fit in most Version 3 metal gearboxes without any modification. The steel construction makes this cut off lever twice as strong as normal zinc alloy cut off levers. The SHS Steel Cut Off Lever is extremely sturdy and precisely machined, ensuring that it fits perfectly in Version 3 gearboxes.
![AEG AR-15/M4 AMBIDEXTROUS MAGAZINE RELEASE - BLACK [CYMA]](https://airsoftguns.ie/18077-home_default/aeg-ar-15m4-ambidextrous-magazine-release-black-cyma-.jpg)
