The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
The sniper rifle replica is made of metal and high quality plastic. The metal made elements are as follows: the minor elements and also the barrel, the bolt carrier, the cocking handle, the RIS rail and the trigger.
Scope and bipod NOT INCLUDED. Please Choice separately from list below
This magazine is an OEM replacement for the Well MB06 Airsoft Gun. Constructed out of plastic, this magazine may work with other airsoft guns but cannot be guaranteed by AirsoftGuns.ie Specifications: Manufacturer: Well Model: MB06 Magazine Magazine Capacity: 20rds Color: Black Material: Plastic Package Includes: One (1) Magazine Search Tags: Stock Replacement OEM MilSim Mag Clip |
Well MB06 20 rd. Spring Rifle Magazine (Black)
€9.95 €4.98 |
|
|
Professional 0,23g BBs - 1kg (4300rds)
€11.95 |
|
Every replica requires regular maintenance. Silicon oil Smart Oil™ is ideal for that kind of activities. PLEASE NOTE THE PRESSURE CONTAINERS CAN BE SHIPPED ONLY TO IRELAND!
|
Smart Oil™ Silicon Oil – 100 ml
€5.95 |
MB06B sniper rifle replica
The sniper rifle replica is made of metal and high quality plastic. The metal made elements are as follows: the minor elements and also the barrel, the bolt carrier, the cocking handle, the RIS rail and the trigger. The rest of the elements such as the front grip, the body, the pistol grip and the magazine and the stock are made of plastic what guaranties a significant decrease of the construction"s weight.
The stock is adjustable in four positions what allows to adapt it to the length of the shooter. The magazine which is included in the set holds 20 BB pellets.
The barrel is equipped with a detachable overlay under which there is a clockwise outer thread that has got the diameter of 25mm and which allows the mount of a sound suppressor.
The set includes:
- the replica
- a magazine
| Weight: | 2350 g |
|---|---|
| Muzzle velocity: | ~328 fps |
| Material: | ABS, aluminum |
| Length: | 1040 mm |
| Muzzle energy: | 1 J |
| Length of internal barrel: | 326 mm |
| Fire mode: | single |
|
Number of magazines in set: |
1 pcs. |
Spring-powered replica of a American WWII bolt-action rifle with a trigger assembly, barrel and hop-up rubber in the VSR10 system, and a steel cylinder (22x201mm). The stock is made of high-quality real wood, and the elements such as barrel, bolt, receiver, sights, magazine housing, trigger and trigger guard are made of steel and aluminum. Set includes a...
1/1 Scale Super Sophisticated Spring Powered Karabiner 98 Kruz Rifle, was made of metal elements including the barrel, bolt, receiver, sights, trigger and trigger guard. The stock and handguard are made of plastic.
Black Texture ABS Body and Full Metal Receiver With Barrel, Muzzle Power reach ~320FPS Velocity (Air Cocking), Full Metal Magazine Accommodate 25+1 Rounds of 6mm Plastic Pellet. Scope and bipod NOT INCLUDED. Please Choice separately from list below
A replica of the US infantry primary rifle from World War II until the late 1950s, when the M14 and later the M16 rifle were introduced. Electric mechanism with a v7 gearbox compatible with Marui/CYMA parts, steel gears mounted on 6mm bearings and a quick spring change system. The buttstock is made of quality wood, and the elements such as barrel, gas...
The Kar98k rifle replica is made of polymer and metal. The barrel, slide, sights and sling swivels are made of metal. A stock is made of polymer (wood imitation). The manufacturer tried to reproduce the principle of shooting from the firearm counterpart as best as possible. The replica shoots 6mm BBs which are placed in special shells. Shells with BBs are...
1/1 Scale Super Sophisticated Spring Powered Karabiner 98 Kruz Rifle, Full Metal + Wood Stock
WELL L96 Bolt Action Spring Rifle, Replica of Maruzen APS Type 96 Bolt Action Sniper Rifle, Full Metal Bolt System & Solid cocking motion sound, Soft Rubber Stock made it to be ultimate rifle for comfort & accuracy . Scope and bipod NOT INCLUDED. Please Choice separately from list below
With pleasure, we present an authentic replica of the M1903A3 Springfield rifle, one of the most revered firearms in history. This 1:1 scale model produced by the renowned [S&T]) company impresses not only with its faithful reproduction of weight and texture of the original but also with outstanding craftsmanship. Please Note!!! Scope and scope mount...
1/1 Scale Super Sophisticated Spring Powered Karabiner 98 Kruz Rifle, Full Metal + Wood Stock + Scope Bell KAR 98k Air cocking Shell-Ejecting Sniper ( Wood ver./ W Scope Set ) ( DBOY ) - Iconic bolt action rifle used by Nazi Germany during WWII - Air cocking system with shell eject function during bolt action. - Full travel bolt assembly
The M82 Barrett is a semi-automatic anti-materiel rifle used by US Army since 1989 and used by many units and army around the world. It is also called M107 in US army, or «Light Fifty for it .50BMG caliber. The M82 has two variant, the original M82A1 / M82A3 and M82A2, the bullpup version of the M82 Barret Family. A .50 cal Under licence; The airsoft AEG...
WELL L96 Bolt Action Spring Rifle, Replica of Maruzen APS Type 96 Bolt Action Sniper Rifle, Full Metal Bolt System & Solid cocking motion sound, Soft Rubber Stock made it to be ultimate rifle for comfort & accuracy. Scope and bipod NOT INCLUDED. Please Choice separately from list below
WELL VSR-10 Bolt Action Spring airsoft Rifle - Wood Texture ABS Body, Muzzle Power reach ~328FPS, Magazine 25+1 rd. Scope and bipod NOT INCLUDED. Please Choice separately from list below
CYMA M14 AEG- semi-/full-automatic electric rifles- imitation wood furniture and the metal cocking handle makes this airsoft M14 look and fell very realistic.
In 1930, there was an advanced type Mosin Nagant was developed and named M1891/30 Rifle. The Mosin Nagant was the most popular rifle in the world and used by Soviet Army during WWII but stopped production in 1948 since the design was getting old. However it has been used in some countries like Turkey, former East Germany and even showed up in Korean War...
The ST 200 was purposefully crafted to be an unparalleled force on the battlefield, excelling at extended ranges due to a new caliber .408. Its design revolves around empowering modern warfighters with the capability to unleash devastatingly accurate firepower over long distances. The ST 200's exceptional performance has catapulted it to the heights of...
Black Texture ABS Body and Full Metal Receiver With Barrel. Power reach ~328FPS Velocity (Air Cocking), Magazine Accommodate 25+1 Rounds of 6mm Plastic Pellet, Airsoft WELL VSR-10 MB03 Bolt Action Spring Rifle Scope and bipod NOT INCLUDED. Please Choice separately from list below
The sniper rifle replica is made of metal and high quality plastic. The metal made elements are as follows: the minor elements and also the barrel, the bolt carrier, the cocking handle, the RIS rail and the trigger.
Scope and bipod NOT INCLUDED. Please Choice separately from list below
![M1 GARAND RIFLE REPLICA [PJ]](https://airsoftguns.ie/18239-home_default/m1-garand-rifle-replica-pj-.jpg)
