The Comtac headset is a double-earpiece communications interface with output sound in both ear and a microphone on an adjustable boom.
Double rifle gun case have two main pockets, bigger one have 120 cm long and shorter one have 93 cm long. It also can be used as backpack. Longer pocket have also a sleeve inside that can extend gun case for extra 27 cm.
The gun bag is made of nylon. Thanks to the application of the additional sleeve the cover will without any problem hold a gun that is up to 1300mm long. Inside of the main chamber there are two additional gun mounting bands. Inside the front 620x260mm big pocket we will fit a machinegun. The gun mounting bands are also located in it.
Gun case with two chambers for dual storage/transportation. Main chamber will hold rifle up to 960 mm long (or 1100 mm when utilising the external hood).Secondary chamber will hold a firearm up to 650 mm long.Case also has pockets that allow transporting magazine or other accesories.Case may be transported in ordinary fasion with use of transport handle...
The bag is constructed from durable and tough 600D nylon, which is capable of supporting the weight of two Airsoft weapons with ease. This practical carry case is ideal for any Airsofter who likes taking more than one Airsoft weapon to a skirmish, and keeping all of their gear together in one convenient bag.
Hydration system drink tube exit hole on top of the backpack. Strap and ring around the backpack, able to add-on pouches and accessories.
A very comfortable nylon made Assault Pack. Thanks to the good planning of the compartment and pocket placing the backpack is very capacious despite the rather small dimensions. The suspenders are adjustable in two ways: on the height of the shoulder and by the bottom of the backpack. The backpack can be taken off in a very easy and fast way thanks to...
Gun case with two chambers for guns. Main chamber will hold gun with lenght up to 800 mm (or 1100 mm with use of external hood) Secondary chamber will hold gun with lenght up to 580 mmCase has also pocket"s allowing for transport of magazine"s or other accesories
LED Module can change your Hopup chamber to be a tracer unit, No silencer type tracer unit anymore, shot illuminated BB without losing balance of weapon. Suitable for MADBULL Ultimate 3-in-1 Hop Up Chamber Unit
Madbull PWS Diablo Compensator -- Primary Weapons Systems, Inc (PWS) is a Federally-licensed firearms manufacturer -- T6 6061 Aluminum Construction
The ST 200 was purposefully crafted to be an unparalleled force on the battlefield, excelling at extended ranges due to a new caliber .408. Its design revolves around empowering modern warfighters with the capability to unleash devastatingly accurate firepower over long distances. The ST 200's exceptional performance has catapulted it to the heights of popularity, in Special Operation forces like the British SAS and Polish GROM but it has a prominent presence in various forms of media. Its can be seen in movies like Shooter, Ghost Rider: Spirit of Vengeance, Zero Tolerance, and video game appearances like Call of Duty.
# Design close to the original
Please Note!!!
Estimated delivery time is 10-14 working days!
The ST 200 was purposefully crafted to be an unparalleled force on the battlefield, excelling at extended ranges due to a new caliber .408. Its design revolves around empowering modern warfighters with the capability to unleash devastatingly accurate firepower over long distances. The ST 200's exceptional performance has catapulted it to the heights of popularity, in Special Operation forces like the British SAS and Polish GROM but it has a prominent presence in various forms of media. Its can be seen in movies like Shooter, Ghost Rider: Spirit of Vengeance, Zero Tolerance, and video game appearances like Call of Duty.
# Design close to the original
S&T is a passionate collective of Airsoft enthusiasts dedicated to manufacturing top-tier rifles and components in line with the latest trends in the Airsoft industry. That is why they offer to the Airsoft market this ST-SPG-10BK Airsoft bolt action sniper. S&T give a very big importance to be close as possible to the original rifle, by weigth dimension and functionality.
# Solid construction
This massive ST200 airsoft rifle in black mat color, requires a robust construction, which is why it is primarily made from aluminum, including steel components like the charging handle, magazine, and [sling attachments]. On the upper part of the receiver, there is a unique serial number and a 22mm Picatinny rail, allowing the installation of various [optics]. The same type of rail is also present on the top of the handguard. For added stability, the ST 200 sniper rifle is equipped with a bipod with 6 adjustable height positions. Additionally, it features a 6-position ergonomic stock with a rubber shoulder pad and a monopod for increased stability during shooting. All of these features are complemented by a PGRS-1-type muzzle brake. The airsoft rifle also comes with a practical transport handle with a rubber finish, which proves very convenient when transporting this imposing airsoft rifle.
# Reinforced internals
Inside the replica, we can find a reinforced copper cylinder covered with a gray patina. The hop-up rubber unit, inner barrel, and spring are all AEG standard, providing a wide range of possibilities for installing various [buckings]
# The set include :
* Bolt action rifle ST200 ST-SPG-10BK
* 60 BBs steel magazine
* Transport case
* SpeedLoader
Hop up: adjustable
Weight: 7015 g
Magazine material: steel
Magazine model: mid-cap
Material: aluminum, rubber, metal, steel
Fire type: single
Serial number: YES
Length mm: 1410
Inner barrel length mm: 600
Muzzle energy J: ~1
Magazine capacity BBs: 60
Muzzle velocity fps: ~328
Inner barrel diameter mm: 6.04
Gun Model: M200
Every replica pass initial check up. It's being checked and overshooted on XCORTECH X3200 chronograph.
The Kar98k rifle replica is made of polymer and metal. The barrel, slide, sights and sling swivels are made of metal. A stock is made of polymer (wood imitation). The manufacturer tried to reproduce the principle of shooting from the firearm counterpart as best as possible. The replica shoots 6mm BBs which are placed in special shells. Shells with BBs are...
S&T LEE ENFIELD SMLE NO. 1 MK III AIRSOFT RIFLE IN REAL WOOD This S&T reproduction is a fantastic replica of the famous SMLE, with a real wood stock, Iron Cylinder and almost full metal construction this rifle comes in at 3.5kg, that is less than 500grams lighter than the real rifle. S&T have decided to go with the slightly later square...
1/1 Scale Super Sophisticated Spring Powered Karabiner 98 Kruz Rifle, Full Metal + Wood Stock + Scope Bell KAR 98k Air cocking Shell-Ejecting Sniper ( Wood ver./ W Scope Set ) ( DBOY ) - Iconic bolt action rifle used by Nazi Germany during WWII - Air cocking system with shell eject function during bolt action. - Full travel bolt assembly
The sniper rifle replica is made of metal and high quality plastic. The metal made elements are as follows: the minor elements and also the barrel, the bolt carrier, the cocking handle, the RIS rail and the trigger. Scope and bipod NOT INCLUDED. Please Choice separately from list below
With pleasure, we present an authentic replica of the M1903A3 Springfield rifle, one of the most revered firearms in history. This 1:1 scale model produced by the renowned [S&T]) company impresses not only with its faithful reproduction of weight and texture of the original but also with outstanding craftsmanship. Please Note!!! Scope and scope mount...
Black Texture ABS Body and Full Metal Receiver With Barrel. Power reach ~328FPS Velocity (Air Cocking), Magazine Accommodate 25+1 Rounds of 6mm Plastic Pellet, Airsoft WELL VSR-10 MB03 Bolt Action Spring Rifle Scope and bipod NOT INCLUDED. Please Choice separately from list below
Spring-powered replica of a American WWII bolt-action rifle with a trigger assembly, barrel and hop-up rubber in the VSR10 system, and a steel cylinder (22x201mm). The stock is made of high-quality real wood, and the elements such as barrel, bolt, receiver, sights, magazine housing, trigger and trigger guard are made of steel and aluminum. Set includes a...
Introducing the [Double Bell Lee Enfield Rifle, a highly realistic 1:1 spring replica of the Lee Enfield MKIII. This model boasts 100% real wood and full metal construction, making it the most authentic on the market. In the real world, the Lee Enfield NO.1 MK3 is a bolt-action, magazine-fed long rifle. It was adopted by British and Commonwealth armed...
WELL L96 Bolt Action Spring Rifle, Replica of Maruzen APS Type 96 Bolt Action Sniper Rifle, Full Metal Bolt System & Solid cocking motion sound, Soft Rubber Stock made it to be ultimate rifle for comfort & accuracy. Scope and bipod NOT INCLUDED. Please Choice separately from list below
A replica of the US infantry primary rifle from World War II until the late 1950s, when the M14 and later the M16 rifle were introduced. Electric mechanism with a v7 gearbox compatible with Marui/CYMA parts, steel gears mounted on 6mm bearings and a quick spring change system. The buttstock is made of quality wood, and the elements such as barrel, gas...
WELL VSR-10 Bolt Action Spring airsoft Rifle - Wood Texture ABS Body, Muzzle Power reach ~328FPS, Magazine 25+1 rd. Scope and bipod NOT INCLUDED. Please Choice separately from list below
The AGM MP002C sniper rifle replica is an excellent choice for novice airsoft players looking to embark on their journey into this type of entertainment. This budget-friendly version of a sniper rifle is modeled after a popular designated marksman rifle used by special units worldwide. It operates on a "bolt action" principle, which means that after each...
1/1 Scale Super Sophisticated Spring Powered Karabiner 98 Kruz Rifle, Full Metal + Wood Stock
1/1 Scale Super Sophisticated Spring Powered Karabiner 98 Kruz Rifle, was made of metal elements including the barrel, bolt, receiver, sights, trigger and trigger guard. The stock and handguard are made of plastic.
Black Texture ABS Body and Full Metal Receiver With Barrel, Muzzle Power reach ~320FPS Velocity (Air Cocking), Full Metal Magazine Accommodate 25+1 Rounds of 6mm Plastic Pellet. Scope and bipod NOT INCLUDED. Please Choice separately from list below
WELL L96 Bolt Action Spring Rifle, Replica of Maruzen APS Type 96 Bolt Action Sniper Rifle, Full Metal Bolt System & Solid cocking motion sound, Soft Rubber Stock made it to be ultimate rifle for comfort & accuracy . Scope and bipod NOT INCLUDED. Please Choice separately from list below
The ST 200 was purposefully crafted to be an unparalleled force on the battlefield, excelling at extended ranges due to a new caliber .408. Its design revolves around empowering modern warfighters with the capability to unleash devastatingly accurate firepower over long distances. The ST 200's exceptional performance has catapulted it to the heights of popularity, in Special Operation forces like the British SAS and Polish GROM but it has a prominent presence in various forms of media. Its can be seen in movies like Shooter, Ghost Rider: Spirit of Vengeance, Zero Tolerance, and video game appearances like Call of Duty.
# Design close to the original
Please Note!!!
Estimated delivery time is 10-14 working days!
![M1 GARAND RIFLE REPLICA [PJ]](https://airsoftguns.ie/18239-home_default/m1-garand-rifle-replica-pj-.jpg)
